Re: new to sgi linux

[Dong Liu <dliu@npiww.com>]

Ulf Carlsson writes:
 > 2.1.90 doesn't work on my Indy :-(
 > 
 > Here's the output (maybe something for Ralf to look at):
 > 
 > PROMLIB: SGI ARCS firmware Version 1 Revision 10
 > PROMLIB: Total free ram 33284672 bytes (31528K, 30MB)
 > ARCH: SGI-IP22
 > CPU: MIPS-R4000 FPU<MIPS-R4000FPC> ICACHE DCACHE SCACHE
 > Loading R4000 MMU routines.
 > Primary instruction cache 8kb, linesize 16 bytes)
 > Primary data cache 8kb, linesize 16 bytes)
 > Secondary cache sized at 1024K linesize 128
 > Linux version 2.1.90 (oliver@ball.aec.at) (gcc version 2.7.2) ...
 > MC: SGI memory controller Revision 3
 > R4600/R5000 SCACHE size 0k linesize 128 bytes
 > calculating r4koff... 000a1e0(500192)
 > GFX INIT: SHMIQ setup
 > usemaclone misc device registered (minor: 151)
 > Video screen size is 00004c88 at 88318db0
 > Console: 16 point font, 992 scans
 > Console: colour NEWPORT 158x62, 1 virtual console (max 63)
 > Calibrating delay loop... 49.97 BogoMIPS
 > Memory: 28300k/163372k available (1036 kernel code, 2188k data)
 > Swansea University Computer Society NET3.039 for Linux 2.1
 > NET3: Unix domain sockets 0.16 for Linux NET3.038.
 > Swansea University Computer Society TCP/IP for NET3.037
 > IP Protocols: ICMP, UDP, TCP
 > Checking for 'wait' instruction... unavailable
 > POSIX conformance testing by UNIFIX
 > Starting kswapd v 1.5
 > SGI Zilog8530 serial driver version 1.00
 > tty00 at 0xbfbd9838 (irq = 21) is a Zilog8530
 > tty01 at 0xbfbd9830 (irq = 21) is a Zilog8530
 > WD93: Driver version 1.25 compiled on Mar 31 1998 at 22:26:48
 >  debug_flags=0x00
 > wd33c93-0: chip=WD33c93B/13 no_sync=0xff no_dma=0scsi0 : GVP SeriesII SCSI
 > scsi : 1 host
 >  sending SDTR 0103013f0csync_xfer=2cpagefault from irq handler: 0000
 > $0 : 00000000 1004fc00 89f5ac80 ffffff80
 > $4 : 00000000 89f5acd0 1004fc00 1004fc00
 > $8 : 1004fc00 1000001f 4003f004 8802c10c
 > $12: 00000100 880ee84e 88009fa0 ffffffe0
 > $16: c0000044 00001000 a9f58000 89f59c00
 > $20: 89f59e70 bfbc0003 00000060 bfb90000
 > $24: a8747310 8810e5cc
 > $28: 88008000 88009c90 89f59e70 880d9204
 > epc   : 880224e8
 > Status: 1000fc02
 > Cause : 30008008
 > Aiee, killing interrupt handler
 > Kernel panic: Attempted to kill the idle task!
 > In swapper task - not syncing
 > 
I had the exact same result:=).

Dong