From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by neteng.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id PAA19984 for ; Tue, 27 Oct 1998 15:57:49 -0800 (PST) Return-Path: Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id PAA64943 for linux-list; Tue, 27 Oct 1998 15:57:14 -0800 (PST) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id PAA66693 for ; Tue, 27 Oct 1998 15:57:12 -0800 (PST) mail_from (ulfc@bun.falkenberg.se) Received: from calypso.saturn (dialup120-1-42.swipnet.se [130.244.120.42]) by sgi.sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id PAA02948 for ; Tue, 27 Oct 1998 15:57:10 -0800 (PST) mail_from (ulfc@bun.falkenberg.se) Received: by bun.falkenberg.se via sendmail from stdin id (Debian Smail3.2.0.101) for linux@cthulhu.engr.sgi.com; Wed, 28 Oct 1998 00:59:01 +0100 (CET) Message-ID: <19981028005901.C23849@zigzegv.ml.org> Date: Wed, 28 Oct 1998 00:59:01 +0100 From: Ulf Carlsson To: ralf@uni-koblenz.de Cc: linux@cthulhu.engr.sgi.com Subject: HAL2 interrupt Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2 Sender: owner-linux@cthulhu.engr.sgi.com Precedence: bulk Hi, I mailed you a few days ago, maybe that mail got dropped somewhere or maybe you were to busy too read, anyhow .. Now I'm asking again, do you know which interrupt number I should request for the PBUS DMA:s. I can't handle the interrupts correctly without the knowledge of interrupt numbers, and I'm afraid the spec didn't tell me anything about this (atleast not the ones I've read). Also, is everything else I need for dealing these interrupts ok (I haven't been able to check)? Maybe I could setup some bogus irq detection stuff to figure this out on my own, but to save some bogus programming I'm asking you instead. It would be nice if you even explained *how* you know.. I think I'm pretty much done with a simple playback/recording driver now, still untested though (probably +1000 serious bugs and race conditions, but I'll fix that..). Thanks, Ulf