From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by neteng.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id CAA02697 for ; Thu, 29 Oct 1998 02:11:41 -0800 (PST) Return-Path: Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id CAA87971 for linux-list; Thu, 29 Oct 1998 02:10:42 -0800 (PST) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id CAA67585 for ; Thu, 29 Oct 1998 02:10:39 -0800 (PST) mail_from (ulfc@bun.falkenberg.se) Received: from calypso.saturn ([194.236.80.24]) by sgi.sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id CAA06071 for ; Thu, 29 Oct 1998 02:10:37 -0800 (PST) mail_from (ulfc@bun.falkenberg.se) Received: by bun.falkenberg.se via sendmail from stdin id (Debian Smail3.2.0.101) for linux@cthulhu.engr.sgi.com; Thu, 29 Oct 1998 11:12:11 +0100 (CET) Message-ID: <19981029111211.B28553@zigzegv.ml.org> Date: Thu, 29 Oct 1998 11:12:11 +0100 From: Ulf Carlsson To: Thomas Bogendoerfer , ralf@uni-koblenz.de Cc: linux@cthulhu.engr.sgi.com Subject: Re: HAL2 interrupt References: <19981028005901.C23849@zigzegv.ml.org> <19981028232652.A2587@alpha.franken.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2 In-Reply-To: <19981028232652.A2587@alpha.franken.de>; from Thomas Bogendoerfer on Wed, Oct 28, 1998 at 11:26:52PM +0100 Sender: owner-linux@cthulhu.engr.sgi.com Precedence: bulk On Wed, Oct 28, 1998 at 11:26:52PM +0100, Thomas Bogendoerfer wrote: > On Wed, Oct 28, 1998 at 12:59:01AM +0100, Ulf Carlsson wrote: > > Now I'm asking again, do you know which interrupt number I should request for > > the PBUS DMA:s. I can't handle the interrupts correctly without the knowledge of > > for me it looks like SGINT_HPCDMA should be the first PBUS DMA interrupt. > But looking further into the indyIRQ.S and indy_int.c indicates, that these > interrupts aren't implemented, yet. The problem is that the sgiseeq and the sgiwd93 use HPC DMA as well, but they're sharing local interrupt 0 (MIPS IRQ 2), and using some status register to differentiate them. If I were writing a sgiwd93 driver or a sgiseeq driver, my first guess would have been that they were using the SGINT_HPCDMA interrupts. Well, looks like I'm out of luck, I'll do some trial & error. Ralf? - Ulf