From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by neteng.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA28499 for ; Thu, 29 Oct 1998 14:14:20 -0800 (PST) Return-Path: Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id OAA20074 for linux-list; Thu, 29 Oct 1998 14:13:34 -0800 (PST) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA93005 for ; Thu, 29 Oct 1998 14:13:31 -0800 (PST) mail_from (sgi.sgi.com!rachael.franken.de!hub-fue!alpha.franken.de!tsbogend) Received: from rachael.franken.de (rachael.franken.de [193.175.24.38]) by sgi.sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id OAA06840 for ; Thu, 29 Oct 1998 14:13:30 -0800 (PST) mail_from (rachael.franken.de!hub-fue!alpha.franken.de!tsbogend) Received: from hub-fue by rachael.franken.de via rmail with uucp id for cthulhu.engr.sgi.com!linux; Thu, 29 Oct 1998 23:13:14 +0100 (MET) (Smail-3.2 1996-Jul-4 #4 built DST-Sep-8) Received: by hub-fue.franken.de (Smail3.1.29.1 #35) id m0zZ0JW-002PAwC; Thu, 29 Oct 98 23:13 MET Received: (from tsbogend@localhost) by alpha.franken.de (8.8.7/8.8.5) id XAA03794; Thu, 29 Oct 1998 23:10:09 +0100 Message-ID: <19981029231009.A3756@alpha.franken.de> Date: Thu, 29 Oct 1998 23:10:09 +0100 From: Thomas Bogendoerfer To: Ulf Carlsson , ralf@uni-koblenz.de Cc: linux@cthulhu.engr.sgi.com Subject: Re: HAL2 interrupt References: <19981028005901.C23849@zigzegv.ml.org> <19981028232652.A2587@alpha.franken.de> <19981029111211.B28553@zigzegv.ml.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.91.1 In-Reply-To: <19981029111211.B28553@zigzegv.ml.org>; from Ulf Carlsson on Thu, Oct 29, 1998 at 11:12:11AM +0100 Sender: owner-linux@cthulhu.engr.sgi.com Precedence: bulk On Thu, Oct 29, 1998 at 11:12:11AM +0100, Ulf Carlsson wrote: > The problem is that the sgiseeq and the sgiwd93 use HPC DMA as well, but they're yes, but they aren't using PBUS DMA channels, because they aren't connected to the PBUS. > sharing local interrupt 0 (MIPS IRQ 2), and using some status register to > differentiate them. If I were writing a sgiwd93 driver or a sgiseeq driver, my > first guess would have been that they were using the SGINT_HPCDMA interrupts. SCSI and ethernet are special HPC devices, so they get handled in a different way. > Well, looks like I'm out of luck, I'll do some trial & error. try interrupt 12, which should be the HPC3 interrupt (sgint23.h). After getting an HPC3 interrupt you have to look in HPC3 register istat0 and istat1 for the interrupt source. I guess DaveM wanted to map these interrupt sources to SGINT_HPCDMA, but never got to implement it. Thomas. -- This device has completely bogus header. Compaq scores again :-| It's a host bridge, but it should be called ghost bridge instead ;^) [Martin `MJ' Mares on linux-kernel]