From mboxrd@z Thu Jan 1 00:00:00 1970 Received: by oss.sgi.com id ; Sun, 16 Jan 2000 20:32:54 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:21550 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Sun, 16 Jan 2000 20:32:28 -0800 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id UAA26915; Sun, 16 Jan 2000 20:29:46 -0800 (PST) mail_from (owner-linux@cthulhu.engr.sgi.com) Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id UAA79940 for linux-list; Sun, 16 Jan 2000 20:14:47 -0800 (PST) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id UAA56649 for ; Sun, 16 Jan 2000 20:14:41 -0800 (PST) mail_from (ralf@oss.sgi.com) Received: from mailhost.uni-koblenz.de (mailhost.uni-koblenz.de [141.26.64.1]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id UAA05041 for ; Sun, 16 Jan 2000 20:14:38 -0800 (PST) mail_from (ralf@oss.sgi.com) Received: from cacc-25.uni-koblenz.de (cacc-25.uni-koblenz.de [141.26.131.25]) by mailhost.uni-koblenz.de (8.9.3/8.9.3) with ESMTP id FAA06745; Mon, 17 Jan 2000 05:14:34 +0100 (MET) Received: by lappi.waldorf-gmbh.de id ; Mon, 17 Jan 2000 05:06:02 +0100 Date: Mon, 17 Jan 2000 05:06:02 +0100 From: Ralf Baechle To: Jeff Harrell Cc: Conrad Parker , linux@cthulhu.engr.sgi.com Subject: Re: question concerning serial console setup Message-ID: <20000117050602.C16920@uni-koblenz.de> References: <386A5F9B.50B4AFEF@ti.com> <19991230114736.C18261@cse.unsw.edu.au> <38828F72.F0FA585@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3us In-Reply-To: <38828F72.F0FA585@ti.com> X-Accept-Language: de,en,fr Sender: owner-linuxmips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linuxmips-outgoing On Sun, Jan 16, 2000 at 08:41:38PM -0700, Jeff Harrell wrote: > Unfortunately I am working on an embedded platform, only using this code > as a starting point for our design. If possible I would like to initialize > the console w/o the use of command line parameters. A simple solution is to hardwire the commmand line in arch/mips/kernel/setup.c. Ralf