Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Florian Lohoff <flo@rfc822.org>
To: Karsten Merker <karsten@excalibur.cologne.de>
Cc: debian-mips@lists.debian.org, linux-mips@oss.sgi.com
Subject: Re: DELO problems
Date: Sat, 15 Dec 2001 23:58:24 +0100	[thread overview]
Message-ID: <20011215225824.GA3056@paradigm.rfc822.org> (raw)
In-Reply-To: <20011215230150.B2636@excalibur.cologne.de>

[-- Attachment #1: Type: text/plain, Size: 924 bytes --]

On Sat, Dec 15, 2001 at 11:01:50PM +0100, Karsten Merker wrote:
> Hallo everyone,
> 
> I cannot get delo to boot any recently built kernel - delo loads 
> /etc/delo.conf, finds the correct kernel image and loads it,
> printing "Loading /boot/vmlinux ....... ok", but when the kernel
> itself should be startet (and print "This DECstation is a ...."),
> I get the firmware prompt again.

Have a look at the elf file with readelf - It shows a section which has
a len > 0 and the load address is "0" - When copieng the sections i
overwrite important stuff - This is actually a binutils fault not a
delos one. Although i have been told that i can heavily optimize the
stuff by not dealing with the sections rather than segments. I will
change that.

Flo
-- 
Florian Lohoff                  flo@rfc822.org             +49-5201-669912
Nine nineth on september the 9th              Welcome to the new billenium

[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]

      parent reply	other threads:[~2001-12-15 23:59 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-12-15 22:01 DELO problems Karsten Merker
2001-12-15 22:29 ` Martin Michlmayr
2001-12-15 22:58 ` Florian Lohoff [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20011215225824.GA3056@paradigm.rfc822.org \
    --to=flo@rfc822.org \
    --cc=debian-mips@lists.debian.org \
    --cc=karsten@excalibur.cologne.de \
    --cc=linux-mips@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox