From: "H . J . Lu" <hjl@lucon.org>
To: Andrew Morton <akpm@zip.com.au>
Cc: tytso@thunk.org, linux-mips@oss.sgi.com
Subject: Does e2fsprogs-1.26 work on mips?
Date: Sat, 23 Mar 2002 14:07:28 -0800 [thread overview]
Message-ID: <20020323140728.A4306@lucon.org> (raw)
I got
[root@localhost e2fsprogs-1.26]# ./e2fsck/e2fsck -f /dev/hda1
e2fsck 1.26 (3-Feb-2002)
Pass 1: Checking inodes, blocks, and sizes
File size limit exceeded
on Linux/mipsel. /dev/hda1 is a 7GB ext3 partition. e2fsprogs-1.23
works fine. Strace
open("/dev/hda1", O_RDWR|O_LARGEFILE) = 4
fstat(4, {st_mode=S_IFBLK|0660, st_rdev=makedev(3, 1), ...}) = 0
setrlimit(RLIMIT_FSIZE, {rlim_cur=-1, rlim_max=-1}) = 0
getrlimit(RLIMIT_FSIZE, {rlim_cur=-1, rlim_max=-1}) = 0
lseek(4, 1024, SEEK_SET) = 1024
read(4, "\0\200\22\0b\357$\0\304\330\1\0\230\211\36\0\35\322\21"..., 1024) =
102
4
lseek(4, 4096, SEEK_SET) = 4096
read(4, "\2\0\0\0\3\0\0\0\4\0\0\0\0\0\365?\2\0\0\0\0\0\0\0\0\0\0"..., 4096) =
40
96
time(NULL) = 1016919001
lseek(4, 1072, SEEK_SET) = 1072
write(4, "\331\363", 2) = 2
lseek(4, 1120, SEEK_SET) = 1120
write(4, "\2\0", 2) = 2
lseek(4, 4096, SEEK_SET) = 4096
write(4, "\2\0\0\0\3\0\0\0\4\0\0\0\0\0\365?\2\0\0\0\0\0\0\0\0\0\0"..., 4096) =
4
096
lseek(4, 134217728, SEEK_SET) = 134217728
write(4, "\0\200\22\0b\357$\0\304\330\1\0\230\211\36\0\35\322\21"..., 1024) =
10
24
lseek(4, 134221824, SEEK_SET) = 134221824
write(4, "\2\0\0\0\3\0\0\0\4\0\0\0\0\0\365?\2\0\0\0\0\0\0\0\0\0\0"..., 4096) =
4
096
lseek(4, 402653184, SEEK_SET) = 402653184
write(4, "\0\200\22\0b\357$\0\304\330\1\0\230\211\36\0\35\322\21"..., 1024) =
10
24
lseek(4, 402657280, SEEK_SET) = 402657280
write(4, "\2\0\0\0\3\0\0\0\4\0\0\0\0\0\365?\2\0\0\0\0\0\0\0\0\0\0"..., 4096) =
4
096
lseek(4, 671088640, SEEK_SET) = 671088640
write(4, "\0\200\22\0b\357$\0\304\330\1\0\230\211\36\0\35\322\21"..., 1024) =
10
24
lseek(4, 671092736, SEEK_SET) = 671092736
write(4, "\2\0\0\0\3\0\0\0\4\0\0\0\0\0\365?\2\0\0\0\0\0\0\0\0\0\0"..., 4096) =
4
096
lseek(4, 939524096, SEEK_SET) = 939524096
write(4, "\0\200\22\0b\357$\0\304\330\1\0\230\211\36\0\35\322\21"..., 1024) =
10
24
lseek(4, 939528192, SEEK_SET) = 939528192
write(4, "\2\0\0\0\3\0\0\0\4\0\0\0\0\0\365?\2\0\0\0\0\0\0\0\0\0\0"..., 4096) =
4
096
lseek(4, 1207959552, SEEK_SET) = 1207959552
write(4, "\0\200\22\0b\357$\0\304\330\1\0\230\211\36\0\35\322\21"..., 1024) =
10
24
lseek(4, 1207963648, SEEK_SET) = 1207963648
write(4, "\2\0\0\0\3\0\0\0\4\0\0\0\0\0\365?\2\0\0\0\0\0\0\0\0\0\0"..., 4096) =
4
096
_llseek(4, 18446744072770027520, [3355443200], SEEK_SET) = 0
write(4, "\0\200\22\0b\357$\0\304\330\1\0\230\211\36\0\35\322\21"..., 1024) =
10
24
_llseek(4, 18446744072770031616, [3355447296], SEEK_SET) = 0
write(4, "\2\0\0\0\3\0\0\0\4\0\0\0\0\0\365?\2\0\0\0\0\0\0\0\0\0\0"..., 4096) =
4
096
_llseek(4, 18446744073038462976, [3623878656], SEEK_SET) = 0
write(4, "\0\200\22\0b\357$\0\304\330\1\0\230\211\36\0\35\322\21"..., 1024) =
10
24
_llseek(4, 18446744073038467072, [3623882752], SEEK_SET) = 0
write(4, "\2\0\0\0\3\0\0\0\4\0\0\0\0\0\365?\2\0\0\0\0\0\0\0\0\0\0"..., 4096) =
4
096
_llseek(4, 18446744071696285696, [6576668672], SEEK_SET) = 0
write(4, "\0\200\22\0b\357$\0\304\330\1\0\230\211\36\0\35\322\21"..., 1024) =
-1
EFBIG (File too large)
--- SIGXFSZ (File size limit exceeded) ---
+++ killed by SIGXFSZ +++
Any ideas?
H.J.
next reply other threads:[~2002-03-23 22:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-23 22:07 H . J . Lu [this message]
2002-03-24 0:21 ` Does e2fsprogs-1.26 work on mips? Andrew Morton
[not found] ` <20020323221627.A10953@lucon.org>
[not found] ` <3C9D7A42.B106C62D@zip.com.au>
2002-03-24 9:28 ` H . J . Lu
2002-03-25 5:31 ` Theodore Tso
2002-03-25 5:43 ` Andrew Morton
2002-03-26 6:54 ` Theodore Tso
2002-03-26 10:51 ` Paul Mackerras
-- strict thread matches above, loose matches on Subject: below --
2002-03-25 10:52 Peter Hartley
2002-03-25 17:07 ` H . J . Lu
2002-03-25 19:00 Peter Hartley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020323140728.A4306@lucon.org \
--to=hjl@lucon.org \
--cc=akpm@zip.com.au \
--cc=linux-mips@oss.sgi.com \
--cc=tytso@thunk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox