Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Jun Sun <jsun@mvista.com>
To: S C <theansweriz42@hotmail.com>
Cc: linux-mips@linux-mips.org, jsun@mvista.com
Subject: Re: Kernel and monitor program
Date: Thu, 10 Jun 2004 15:26:52 -0700	[thread overview]
Message-ID: <20040610152652.J10411@mvista.com> (raw)
In-Reply-To: <BAY99-F42680lFxUe9t00012257@hotmail.com>; from theansweriz42@hotmail.com on Thu, Jun 10, 2004 at 10:17:52PM +0000

On Thu, Jun 10, 2004 at 10:17:52PM +0000, S C wrote:
> Hello all,
> 
> Please pardon the newbie question, but I was wondering what a kernel in 
> general expects a monitor program/bootloader like YAMON to do for it 
> beforehand, if anything at all. I know the answer is very board specific, 
> but if there are any generic things that a kernel expects ready for it 
> before it starts running (caches initialized already? SDRAM control regs set 
> up? Or maybe the kernel has no expectations at all?), I'd be grateful if 
> someone could point them out.

This is almost an FAQ.  (although I don't know if I am giving the
same answer each time ;0)

. initialize system RAM and its controller
. copy kernel to RAM (in normal cases, unless you do XIP)
. initialize and enable cache
. (optionally) pass some args to kernel
. (optionally) initial some board hw.  This is really a negotiation 
   between loader and linux board setup routine.

Jun

      reply	other threads:[~2004-06-10 22:27 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-06-10 22:17 Kernel and monitor program S C
2004-06-10 22:26 ` Jun Sun [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040610152652.J10411@mvista.com \
    --to=jsun@mvista.com \
    --cc=linux-mips@linux-mips.org \
    --cc=theansweriz42@hotmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox