From: Ralf Baechle <ralf@linux-mips.org>
To: willem.acke@alcatel.be
Cc: linux-mips@linux-mips.org
Subject: Re: RM9000x2 TLB load exception
Date: Mon, 2 Aug 2004 23:31:42 +0200 [thread overview]
Message-ID: <20040802213142.GB3980@linux-mips.org> (raw)
In-Reply-To: <410E071F.4060907@alcatel.be>
On Mon, Aug 02, 2004 at 11:19:27AM +0200, willem.acke@alcatel.be wrote:
> I'm trying to port the mips-kernel to a RM9000x2 based custom board.
> The kernel file (mips 32) is loaded using VxWorks boot loader.
> I got the to the point where the kernel starts loading, but exits with a
> 'TLB load exception'.
> After putting in a number of printks, it seems that it fails on
> 'flush_icache_range' in arch/mips/mm/pg-r4k.c -> build_clear_page.
> Since I'm a newbie to this, any pointers to how to tackle this problem
> would be appreciated.
Funny :-) This is a particularly crazy function where I decieded to
generate the clear_function at runtime since we had to many versions
optimized for the one or other processor or configuration which had
become excessivly large.
> Exception:
> Tlb Load Exception
> Exception Program Counter: 0x00000000
> Status Register: 0x3404ff00
> Cause Register: 0x01100008
> Access Address : 0x00000000
> Task: 0x83e2c760 ""
[...]
The register dump is unseless since you didn't say what all the addresses
point to.
Other information that's needed to make sense out of a bug report would be:
- gcc and binutils version used to compile the kernel
- kernel version and also where did you get it from (linux-mips.org?)
Ralf
prev parent reply other threads:[~2004-08-02 21:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-02 9:19 RM9000x2 TLB load exception willem.acke
2004-08-02 21:31 ` Ralf Baechle [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040802213142.GB3980@linux-mips.org \
--to=ralf@linux-mips.org \
--cc=linux-mips@linux-mips.org \
--cc=willem.acke@alcatel.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox