From: Ulrich Eckhardt <eckhardt@satorlaser.com>
To: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
Subject: [patch]small bug in PCMCIA on DB1x00 boards
Date: Mon, 21 Feb 2005 16:09:42 +0100 [thread overview]
Message-ID: <200502211609.42963.eckhardt@satorlaser.com> (raw)
Hello!
Another patch that fixes some small glitches in the PCMCIA code.
Note: I have not (yet) been able to get the compact-flash card to be
recognised on my board (it is supposed to appear as PCMCIA/IDE device,
right?) but this patch addresses three things that should be obvious without
testing. Yes, I know, those are famous last words, but look yourselves. ;)
BTW: I found that au1000_xxs1500.c and au1000_pb1x00.c can't compile due
changed PCMCIA interfaces, some functions (socket_state, configure_socket)
were changed from returning void to returning int and changed their
parameters. These two are also the last two files that use struct
pcmcia_configure. Maybe copying that struct to the .c files and adding an
#error with a proper comment would be a good idea?
Uli
Changes:
* removed struct pcmcia_irqs, which was unused
* added an explicit BUG() in a place marked with "should never happen"
* added a missing early return when the card-voltage could not be
detected, as a comment above already says.
---
Index: au1000_db1x00.c
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/au1000_db1x00.c,v
retrieving revision 1.6
diff -u -r1.6 au1000_db1x00.c
--- au1000_db1x00.c 14 Oct 2004 06:24:25 -0000 1.6
+++ au1000_db1x00.c 21 Feb 2005 14:13:21 -0000
@@ -91,7 +91,9 @@
vs = (bcsr->status & 0xC)>>2;
inserted = !(bcsr->status & (1<<5));
break;
- default:/* should never happen */
+ default:
+ /* should never happen */
+ BUG();
return;
}
@@ -109,8 +111,8 @@
break;
default:
/* return without setting 'detect' */
- printk(KERN_ERR "db1x00 bad VS (%d)\n",
- vs);
+ printk(KERN_ERR "db1x00 bad VS (%d)\n", vs);
+ return;
}
state->detect = 1;
state->ready = 1;
Index: au1000_generic.h
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/au1000_generic.h,v
retrieving revision 1.4
diff -u -r1.4 au1000_generic.h
--- au1000_generic.h 19 Oct 2004 07:26:37 -0000 1.4
+++ au1000_generic.h 21 Feb 2005 14:13:21 -0000
@@ -78,13 +78,6 @@
reset: 1;
};
-struct pcmcia_irqs {
- int sock;
- int irq;
- const char *str;
-};
-
-
struct au1000_pcmcia_socket {
struct pcmcia_socket socket;
next reply other threads:[~2005-02-21 15:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-21 15:09 Ulrich Eckhardt [this message]
2005-02-21 17:26 ` [patch]small bug in PCMCIA on DB1x00 boards Pete Popov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200502211609.42963.eckhardt@satorlaser.com \
--to=eckhardt@satorlaser.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox