From: joeg <joeg@sam.clearcore.com>
To: linux-mips@linux-mips.org, ppopov@embeddedalley.com,
eckhardt@satorlaser.com
Subject: Re: ohci-au1xxx.c breakage
Date: Tue, 22 Mar 2005 17:12:05 -0700 (MST) [thread overview]
Message-ID: <20050323001205.521027E68@sam.clearcore.com> (raw)
This patch works for me on an Au1550 little endian.
Joe
--- linux-2.6.11-3/drivers/usb/host/ohci-au1xxx.c 2005-03-18 10:37:49.000000000 -0700
+++ test_2.6.11_3_tree/drivers/usb/host/ohci-au1xxx.c 2005-03-22 15:29:14.376513351 -0700
@@ -84,97 +84,48 @@ static void au1xxx_stop_hc(struct platfo
*
*/
int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
- struct usb_hcd **hcd_out,
struct platform_device *dev)
{
int retval;
- struct usb_hcd *hcd = 0;
-
- unsigned int *addr = NULL;
-
- if (!request_mem_region(dev->resource[0].start,
- dev->resource[0].end
- - dev->resource[0].start + 1, hcd_name)) {
- pr_debug("request_mem_region failed");
- return -EBUSY;
- }
-
- au1xxx_start_hc(dev);
-
- addr = ioremap(dev->resource[0].start,
- dev->resource[0].end
- - dev->resource[0].start + 1);
- if (!addr) {
- pr_debug("ioremap failed");
- retval = -ENOMEM;
- goto out_release;
- }
+ struct usb_hcd *hcd;
if (dev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug ("resource[1] is not IORESOURCE_IRQ");
retval = -ENOMEM;
- goto out_iounmap;
}
- hcd = usb_create_hcd(driver);
- if (hcd == NULL) {
- pr_debug ("usb_create_hcd failed");
- retval = -ENOMEM;
- goto out_iounmap;
- }
- ohci_hcd_init(hcd_to_ohci(hcd));
+ hcd = usb_create_hcd(driver, &dev->dev, "Au1xxx");
+ if (!hcd)
+ return -ENOMEM;
+ hcd->rsrc_start = dev->resource[0].start;
+ hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
- hcd->irq = dev->resource[1].start;
- hcd->regs = addr;
- hcd->self.controller = &dev->dev;
-
- retval = hcd_buffer_create (hcd);
- if (retval != 0) {
- pr_debug ("pool alloc fail");
- goto out_put_hcd;
- }
-
- retval = request_irq (hcd->irq, usb_hcd_au1xxx_hcim_irq, SA_INTERRUPT,
- hcd->driver->description, hcd);
- if (retval != 0) {
- pr_debug("request_irq failed");
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ pr_debug("request_mem_region failed");
retval = -EBUSY;
- goto out_free_buffer;
+ goto err1;
}
- pr_debug ("%s (Au1xxx) at 0x%p, irq %d",
- hcd->driver->description, hcd->regs, hcd->irq);
-
- hcd->self.bus_name = "au1xxx";
-
- if ((retval = usb_register_bus(&hcd->self)))
- goto out_free_irq;
-
- if ((retval = driver->start(hcd)) < 0) {
- usb_hcd_au1xxx_remove(hcd, dev);
- printk("bad driver->start\n");
- return retval;
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ pr_debug("ioremap failed");
+ retval = -ENOMEM;
+ goto err2;
}
- *hcd_out = hcd;
+ au1xxx_start_hc(dev);
+ ohci_hcd_init(hcd_to_ohci(hcd));
- return 0;
+ retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+ if (retval == 0)
+ return retval;
-out_unregister_bus:
- usb_deregister_bus(&hcd->self);
-out_free_irq:
- free_irq(hcd->irq, hcd);
-out_free_buffer:
- hcd_buffer_destroy (hcd);
-out_put_hcd:
- usb_put_hcd(hcd);
-out_iounmap:
- iounmap(addr);
-out_release:
au1xxx_stop_hc(dev);
- release_mem_region(dev->resource[0].start,
- dev->resource[0].end
- - dev->resource[0].start + 1);
+ iounmap(hcd->regs);
+ err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ err1:
+ usb_put_hcd(hcd);
return retval;
}
next reply other threads:[~2005-03-23 0:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-23 0:12 joeg [this message]
2005-03-23 8:45 ` ohci-au1xxx.c breakage Ulrich Eckhardt
-- strict thread matches above, loose matches on Subject: below --
2005-03-22 15:38 Ulrich Eckhardt
2005-03-22 16:44 ` Pete Popov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050323001205.521027E68@sam.clearcore.com \
--to=joeg@sam.clearcore.com \
--cc=eckhardt@satorlaser.com \
--cc=linux-mips@linux-mips.org \
--cc=ppopov@embeddedalley.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox