Re: [PATCH 2/2] Add GPIO wrappers to Au1x00 boards

[Florian Fainelli <florian.fainelli@telecomint.eu>]

[-- Attachment #1.1: Type: text/plain, Size: 2456 bytes --]

I forgot adding the GENERIC_GPIO entry in Kconfig. The attached patch selects 
GENERIC_GPIO for CONFIG_AU1X00.

Le lundi 21 mai 2007, Florian Fainelli a écrit :
> Hello Atsushi,
>
> Thank you very much for your comments. Here is an updated version which
> includes implementation for input/output directions and should take your
> comments into account.
>
> Le dimanche 20 mai 2007, Atsushi Nemoto a écrit :
> > On Sat, 19 May 2007 21:51:39 +0200, Florian Fainelli
>
> <florian.fainelli@telecomint.eu> wrote:
> > > diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h
> > > linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h ---
> > > linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h	2007-04-27
> > > 23:49:26.000000000 +0200 +++
> > > linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h	2007-05-1
> > >9 21:34:27.000000000 +0200 @@ -1,10 +1,7 @@
> >
> > ...
> >
> > > +/* Wrappers for the arch-neutral GPIO API */
> > > +
> > > +static inline int gpio_request(unsigned gpio, const char *label)
> > > +{
> > > +	/* Not yet implemented */
> > > +	return 0;
> > > +}
> > > +
> > > +static inline void gpio_free(unsigned gpio)
> > > +{
> > > +	/* Not yet implemented */
> > > +}
> > > +
> > > +extern int gpio_direction_input(unsigned gpio);
> > > +extern int gpio_direction_output(unsigned gpio, int value);
> > > +
> > > +static inline int gpio_get_value(unsigned gpio)
> > > +{
> > > +	return au1xxx_gpio_get_value(gpio);
> > > +}
> > > +
> > > +static inline void gpio_set_value(unsigned gpio, int value)
> > > +{
> > > +	au1xxx_gpio_set_value(gpio, value);
> > > +}
> > > +
> > > +static inline int gpio_to_irq(unsigned gpio)
> > > +{
> > > +	return gpio;
> > > +}
> > > +
> > > +static inline int irq_to_gpio(unsigned irq)
> > > +{
> > > +	return irq;
> > > +}
> > > +
> > > +/* For cansleep */
> > > +#include <asm-generic/gpio.h>
> > > +
> > > +#endif /* _AU1XXX_GPIO_H_ */
> >
> > These APIs should be usable by "#include <asm/gpio.h>".  So move
> > mach-au1x00/au1xxx_gpio.h to mach-au1x00/gpio.h and include it by
> > include/asm-mips/gpio.h (as Youichi said).
> >
> > And it seems gpio_direction_input()/gpio_direction_output() are not
> > implemented.  A user of the GPIO API _should_ use these interfaces.
> >
> > ---
> > Atsushi Nemoto



-- 
Cordialement, Florian Fainelli
---------------------------------------------

[-- Attachment #1.2: au1x00-gpio.patch --]
[-- Type: text/plain, Size: 8008 bytes --]

diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h
--- linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,20 +0,0 @@
-#ifndef __AU1XXX_GPIO_H
-#define __AU1XXX_GPIO_H
-
-void au1xxx_gpio1_set_inputs(void);
-void au1xxx_gpio_tristate(int signal);
-void au1xxx_gpio_write(int signal, int value);
-int  au1xxx_gpio_read(int signal);
-
-typedef volatile struct
-{
-	u32 dir;
-	u32 reserved;
-	u32 output;
-	u32 pinstate;
-	u32 inten;
-	u32 enable;
-
-} AU1X00_GPIO2;
-
-#endif //__AU1XXX_GPIO_H
diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h
--- linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h	2007-05-21 01:10:22.000000000 +0200
@@ -0,0 +1,69 @@
+#ifndef _AU1XXX_GPIO_H_
+#define _AU1XXX_GPIO_H_
+
+#define AU1XXX_GPIO_BASE	200
+
+typedef volatile struct
+{
+	u32 dir;
+	u32 reserved;
+	u32 output;
+	u32 pinstate;
+	u32 inten;
+	u32 enable;
+
+} AU1X00_GPIO2;
+
+extern int au1xxx_gpio_get_value(unsigned gpio);
+extern void au1xxx_gpio_set_value(unsigned gpio, int value);
+extern int au1xxx_gpio_direction_input(unsigned gpio);
+extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	/* Not yet implemented */
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	/* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return au1xxx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return au1xxx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return au1xxx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	au1xxx_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _AU1XXX_GPIO_H_ */
diff -urN linux-2.6.21.1/arch/mips/au1000/common/gpio.c linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c
--- linux-2.6.21.1/arch/mips/au1000/common/gpio.c	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c	2007-05-21 01:27:53.000000000 +0200
@@ -1,4 +1,7 @@
 /*
+ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *  	Architecture specific GPIO support
+ *
  *  This program is free software; you can redistribute	 it and/or modify it
  *  under  the terms of	 the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the	License, or (at your
@@ -18,101 +21,128 @@
  *  You should have received a copy of the  GNU General Public License along
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Notes :
+ * 	au1000 SoC have only one GPIO line : GPIO1
+ * 	others have a second one : GPIO2
  */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/types.h>
 #include <linux/module.h>
-#include <au1000.h>
-#include <au1xxx_gpio.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/gpio.h>
 
 #define gpio1 sys
 #if !defined(CONFIG_SOC_AU1000)
 static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
+#define GPIO2_OUTPUT_ENABLE_MASK 	0x00010000
 
-#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
-
-int au1xxx_gpio2_read(int signal)
+static int au1xxx_gpio2_read(unsigned gpio)
 {
-	signal -= 200;
-/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
-	return ((gpio2->pinstate >> signal) & 0x01);
+	gpio -= AU1XXX_GPIO_BASE;
+	return ((gpio2->pinstate >> gpio) & 0x01);
 }
 
-void au1xxx_gpio2_write(int signal, int value)
+static void au1xxx_gpio2_write(unsigned gpio, int value)
 {
-	signal -= 200;
+	gpio -= AU1XXX_GPIO_BASE;
 
-	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
-		(value << signal);
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) |
+	                (value << gpio);
 }
 
-void au1xxx_gpio2_tristate(int signal)
+static int au1xxx_gpio2_direction_input(unsigned gpio)
 {
-	signal -= 200;
-	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
+	gpio -= AU1XXX_GPIO_BASE;
+	gpio2->dir &= ~(0x01 << gpio);
+	return 0;
 }
-#endif
 
-int au1xxx_gpio1_read(int signal)
+static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
 {
-/*	gpio1->trioutclr |= (0x01 << signal); */
-	return ((gpio1->pinstaterd >> signal) & 0x01);
+	gpio -= AU1XXX_GPIO_BASE;
+	gpio2->dir = (0x01 << gpio) | (value << gpio);
+	return 0;
 }
 
-void au1xxx_gpio1_write(int signal, int value)
+#endif /* !defined(CONFIG_SOC_AU1000) */
+
+static int au1xxx_gpio1_read(unsigned gpio)
+{
+	return ((gpio1->pinstaterd >> gpio) & 0x01);
+}
+
+static void au1xxx_gpio1_write(unsigned gpio, int value)
 {
 	if(value)
-		gpio1->outputset = (0x01 << signal);
+		gpio1->outputset = (0x01 << gpio);
 	else
-		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
+		/* Output a zero */
+		gpio1->outputclr = (0x01 << gpio);
 }
 
-void au1xxx_gpio1_tristate(int signal)
+static int au1xxx_gpio1_direction_input(unsigned gpio)
 {
-	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
+	gpio1->pininputen = 0;;
+	return 0;
 }
 
+static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
+{
+	gpio1->trioutclr = (0x01 & gpio);
+	return 0;
+}
 
-int au1xxx_gpio_read(int signal)
+int au1xxx_gpio_get_value(unsigned gpio)
 {
-	if(signal >= 200)
+	if(gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
 		return 0;
 #else
-		return au1xxx_gpio2_read(signal);
+		return au1xxx_gpio2_read(gpio);
 #endif
 	else
-		return au1xxx_gpio1_read(signal);
+		return au1xxx_gpio1_read(gpio);
 }
 
-void au1xxx_gpio_write(int signal, int value)
+void au1xxx_gpio_set_value(unsigned gpio, int value)
 {
-	if(signal >= 200)
+	if(gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
 		;
 #else
-		au1xxx_gpio2_write(signal, value);
+		au1xxx_gpio2_write(gpio, value);
 #endif
 	else
-		au1xxx_gpio1_write(signal, value);
+		au1xxx_gpio1_write(gpio, value);
 }
 
-void au1xxx_gpio_tristate(int signal)
+int au1xxx_gpio_direction_input(unsigned gpio)
 {
-	if(signal >= 200)
+	if (gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
 		;
 #else
-		au1xxx_gpio2_tristate(signal);
+		return au1xxx_gpio2_direction_input(gpio);
 #endif
 	else
-		au1xxx_gpio1_tristate(signal);
+		return au1xxx_gpio1_direction_input(gpio);
 }
 
-void au1xxx_gpio1_set_inputs(void)
+int au1xxx_gpio_direction_output(unsigned gpio, int value)
 {
-	gpio1->pininputen = 0;
+	if (gpio >= AU1XXX_GPIO_BASE)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		return au1xxx_gpio2_direction_output(gpio, value);
+#endif
+	else
+		return au1xxx_gpio1_direction_output(gpio, value);
 }
-
-EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
-EXPORT_SYMBOL(au1xxx_gpio_tristate);
-EXPORT_SYMBOL(au1xxx_gpio_write);
-EXPORT_SYMBOL(au1xxx_gpio_read);
--- linux-2.6.21.1/arch/mips/Kconfig	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1.new/arch/mips/Kconfig	2007-05-21 08:04:42.000000000 +0200
@@ -1044,6 +1044,7 @@
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
 	select SYS_SUPPORTS_KGDB
+	select GENERIC_GPIO
 
 config PNX8550
 	bool

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]