Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Matteo Croce <technoboy85@gmail.com>
To: linux-mips@linux-mips.org
Cc: Nicolas Thill <nico@openwrt.org>,
	openwrt-devel@lists.openwrt.org,
	Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH][MIPS][3/7] AR7: gpio char device
Date: Sat, 8 Sep 2007 02:20:17 +0200	[thread overview]
Message-ID: <200709080220.17882.technoboy85@gmail.com> (raw)
In-Reply-To: <200709080143.12345.technoboy85@gmail.com>

Char device to access GPIO pins

Signed-off-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Nicolas Thill <nico@openwrt.org>

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b391776..d56cfd7 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -928,6 +928,15 @@ config MWAVE
 	  To compile this driver as a module, choose M here: the
 	  module will be called mwave.
 
+config AR7_GPIO
+	tristate "TI AR7 GPIO Support"
+	depends on AR7
+	help
+	  Give userspace access to the GPIO pins on the Texas Instruments AR7
+	  processors.
+
+	  If compiled as a module, it will be called ar7_gpio.
+
 config SCx200_GPIO
 	tristate "NatSemi SCx200 GPIO Support"
 	depends on SCx200
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index d68ddbe..804319e 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_COBALT_LCD)	+= lcd.o
 obj-$(CONFIG_PPDEV)		+= ppdev.o
 obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
 obj-$(CONFIG_NWFLASH)		+= nwflash.o
+obj-$(CONFIG_AR7_GPIO)		+= ar7_gpio.o
 obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
 obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
 obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
diff --git a/drivers/char/ar7_gpio.c b/drivers/char/ar7_gpio.c
new file mode 100644
index 0000000..d57a23e
--- /dev/null
+++ b/drivers/char/ar7_gpio.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <gpio.h>
+
+#define DRVNAME "ar7_gpio"
+#define LONGNAME "TI AR7 GPIOs Driver"
+
+MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>");
+MODULE_DESCRIPTION(LONGNAME);
+MODULE_LICENSE("GPL");
+
+static int ar7_gpio_major;
+
+static ssize_t ar7_gpio_write(struct file *file, const char __user *buf,
+	size_t len, loff_t *ppos)
+{
+	int pin = iminor(file->f_dentry->d_inode);
+	size_t i;
+
+	for (i = 0; i < len; ++i) {
+		char c;
+		if (get_user(c, buf + i))
+			return -EFAULT;
+		switch (c) {
+		case '0':
+			gpio_set_value(pin, 0);
+			break;
+		case '1':
+			gpio_set_value(pin, 1);
+			break;
+		case 'd':
+		case 'D':
+			ar7_gpio_disable(pin);
+			break;
+		case 'e':
+		case 'E':
+			ar7_gpio_enable(pin);
+			break;
+		case 'i':
+		case 'I':
+		case '<':
+			gpio_direction_input(pin);
+			break;
+		case 'o':
+		case 'O':
+		case '>':
+			gpio_direction_output(pin);
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return len;
+}
+
+static ssize_t ar7_gpio_read(struct file *file, char __user *buf,
+	size_t len, loff_t *ppos)
+{
+	int pin = iminor(file->f_dentry->d_inode);
+	int value;
+
+	value = gpio_get_value(pin);
+	if (put_user(value ? '1' : '0', buf))
+		return -EFAULT;
+
+	return 1;
+}
+
+static int ar7_gpio_open(struct inode *inode, struct file *file)
+{
+	int m = iminor(inode);
+
+	if (m >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	return nonseekable_open(inode, file);
+}
+
+static int ar7_gpio_release(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+static const struct file_operations ar7_gpio_fops = {
+	.owner   = THIS_MODULE,
+	.write   = ar7_gpio_write,
+	.read    = ar7_gpio_read,
+	.open    = ar7_gpio_open,
+	.release = ar7_gpio_release,
+	.llseek  = no_llseek,
+};
+
+static struct platform_device *ar7_gpio_device;
+
+static int __init ar7_gpio_init(void)
+{
+	int rc;
+
+	ar7_gpio_device = platform_device_alloc(DRVNAME, -1);
+	if (!ar7_gpio_device)
+		return -ENOMEM;
+
+	rc = platform_device_add(ar7_gpio_device);
+	if (rc < 0)
+		goto out_put;
+
+	rc = register_chrdev(ar7_gpio_major, DRVNAME, &ar7_gpio_fops);
+	if (rc < 0)
+		goto out_put;
+
+	ar7_gpio_major = rc;
+
+	rc = 0;
+
+	goto out;
+
+out_put:
+	platform_device_put(ar7_gpio_device);
+out:
+	return rc;
+}
+
+static void __exit ar7_gpio_exit(void)
+{
+	unregister_chrdev(ar7_gpio_major, DRVNAME);
+	platform_device_unregister(ar7_gpio_device);
+}
+
+module_init(ar7_gpio_init);
+module_exit(ar7_gpio_exit);

  parent reply	other threads:[~2007-09-08  0:20 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <200709080143.12345.technoboy85@gmail.com>
2007-09-08  0:18 ` [PATCH][MIPS][1/7] AR7: core support Matteo Croce
2007-09-08 17:40   ` Atsushi Nemoto
2007-09-11 22:43     ` Matteo Croce
2007-09-12 11:10       ` Ralf Baechle
2007-09-12 11:22       ` Thomas Bogendoerfer
2007-09-12 13:55         ` Ralf Baechle
2007-09-08  0:19 ` [PATCH][MIPS][2/7] AR7: mtd partition map Matteo Croce
2007-09-08  0:20 ` Matteo Croce [this message]
2007-09-08  0:20 ` [PATCH][MIPS][4/7] AR7: leds driver Matteo Croce
2007-09-11 21:43   ` Richard Purdie
2007-09-08  0:21 ` [PATCH][MIPS][5/7] AR7: watchdog timer Matteo Croce
2007-09-08  0:22 ` [PATCH][MIPS][6/7] AR7: serial Matteo Croce
2007-09-08  0:23 ` [PATCH][MIPS][7/7] AR7: ethernet Matteo Croce
2007-09-12 16:50   ` Ralf Baechle
2007-09-13  1:42     ` Thiemo Seufer
2007-09-13 11:35       ` Ralf Baechle
2007-09-20 15:28 [PATCH][MIPS][0/7] AR7: 4th effort Matteo Croce
2007-09-20 16:00 ` [PATCH][MIPS][3/7] AR7: gpio char device Matteo Croce
2007-09-22 16:42   ` Atsushi Nemoto
2007-09-22 18:59     ` David Brownell
2007-09-23 15:47       ` Atsushi Nemoto
  -- strict thread matches above, loose matches on Subject: below --
2007-08-20 15:04 [PATCH 1/1] AR7 port Matteo Croce
2007-09-06 15:27 ` [PATCH][MIPS][3/7] AR7: gpio char device Matteo Croce

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200709080220.17882.technoboy85@gmail.com \
    --to=technoboy85@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-mips@linux-mips.org \
    --cc=nico@openwrt.org \
    --cc=openwrt-devel@lists.openwrt.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox