Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Subject: [PATCH] Alchemy: fix PCI resource conflict (take 2)
Date: Mon, 10 Dec 2007 20:28:51 +0300	[thread overview]
Message-ID: <200712102028.51448.sshtylyov@ru.mvista.com> (raw)

... by getting the PCI resources back into the 32-bit range -- there's no need
therefore for CONFIG_RESOURCES_64BIT either. This makes Alchemy PCI work again
while currently the kernel skips the bus scan.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

---
 arch/mips/au1000/Kconfig              |    9 ---------
 arch/mips/au1000/common/pci.c         |    8 ++++----
 include/asm-mips/mach-au1x00/au1000.h |    9 +++++----
 3 files changed, 9 insertions(+), 17 deletions(-)

Index: linux-2.6/arch/mips/au1000/Kconfig
===================================================================
--- linux-2.6.orig/arch/mips/au1000/Kconfig
+++ linux-2.6/arch/mips/au1000/Kconfig
@@ -7,7 +7,6 @@ config MIPS_MTX1
 	bool "4G Systems MTX-1 board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select RESOURCES_64BIT if PCI
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
@@ -22,7 +21,6 @@ config MIPS_DB1000
 	select SOC_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select RESOURCES_64BIT if PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_DB1100
@@ -44,7 +42,6 @@ config MIPS_DB1500
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_DISABLE_OBSOLETE_IDE
-	select RESOURCES_64BIT if PCI
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
@@ -54,7 +51,6 @@ config MIPS_DB1550
 	select HW_HAS_PCI
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
-	select RESOURCES_64BIT if PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_MIRAGE
@@ -68,7 +64,6 @@ config MIPS_PB1000
 	select SOC_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select RESOURCES_64BIT if PCI
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
@@ -77,7 +72,6 @@ config MIPS_PB1100
 	select SOC_AU1100
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select RESOURCES_64BIT if PCI
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
@@ -86,7 +80,6 @@ config MIPS_PB1200
 	select SOC_AU1200
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
-	select RESOURCES_64BIT if PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_PB1500
@@ -94,7 +87,6 @@ config MIPS_PB1500
 	select SOC_AU1500
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select RESOURCES_64BIT if PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_PB1550
@@ -103,7 +95,6 @@ config MIPS_PB1550
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_DISABLE_OBSOLETE_IDE
-	select RESOURCES_64BIT if PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_XXS1500
Index: linux-2.6/arch/mips/au1000/common/pci.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/common/pci.c
+++ linux-2.6/arch/mips/au1000/common/pci.c
@@ -39,15 +39,15 @@
 
 /* TBD */
 static struct resource pci_io_resource = {
-	.start	= (resource_size_t)PCI_IO_START,
-	.end	= (resource_size_t)PCI_IO_END,
+	.start	= PCI_IO_START,
+	.end	= PCI_IO_END,
 	.name	= "PCI IO space",
 	.flags	= IORESOURCE_IO
 };
 
 static struct resource pci_mem_resource = {
-	.start	= (resource_size_t)PCI_MEM_START,
-	.end	= (resource_size_t)PCI_MEM_END,
+	.start	= PCI_MEM_START,
+	.end	= PCI_MEM_END,
 	.name	= "PCI memory space",
 	.flags	= IORESOURCE_MEM
 };
Index: linux-2.6/include/asm-mips/mach-au1x00/au1000.h
===================================================================
--- linux-2.6.orig/include/asm-mips/mach-au1x00/au1000.h
+++ linux-2.6/include/asm-mips/mach-au1x00/au1000.h
@@ -1680,10 +1680,11 @@ enum soc_au1200_ints {
 #define Au1500_PCI_MEM_START      0x440000000ULL
 #define Au1500_PCI_MEM_END        0x44FFFFFFFULL
 
-#define PCI_IO_START    (Au1500_PCI_IO_START + 0x1000)
-#define PCI_IO_END      (Au1500_PCI_IO_END)
-#define PCI_MEM_START   (Au1500_PCI_MEM_START)
-#define PCI_MEM_END     (Au1500_PCI_MEM_END)
+#define PCI_IO_START	0x00001000
+#define PCI_IO_END	0x000FFFFF
+#define PCI_MEM_START	0x40000000
+#define PCI_MEM_END	0x4FFFFFFF
+
 #define PCI_FIRST_DEVFN (0<<3)
 #define PCI_LAST_DEVFN  (19<<3)
 

             reply	other threads:[~2007-12-10 17:28 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-12-10 17:28 Sergei Shtylyov [this message]
2007-12-10 17:43 ` [PATCH] Alchemy: fix PCI resource conflict (take 2) Nathan Eggan
2007-12-10 17:43   ` Nathan Eggan
2007-12-10 17:48   ` Sergei Shtylyov
2007-12-11 12:19 ` Ralf Baechle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200712102028.51448.sshtylyov@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox