From: Matteo Croce <technoboy85@gmail.com>
To: linux-mips@linux-mips.org
Cc: Nicolas Thill <nico@openwrt.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH][MIPS][4/6]: AR7 refresh
Date: Thu, 27 Dec 2007 19:25:46 +0100 [thread overview]
Message-ID: <200712271925.46306.technoboy85@gmail.com> (raw)
In-Reply-To: <200712271919.23577.technoboy85@gmail.com>
Signed-off-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Nicolas Thill <nico@openwrt.org>
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ef1ed5d..307b8c8 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -904,6 +904,15 @@ config MWAVE
To compile this driver as a module, choose M here: the
module will be called mwave.
+config AR7_GPIO
+ tristate "TI AR7 GPIO Support"
+ depends on AR7
+ help
+ Give userspace access to the GPIO pins on the Texas Instruments AR7
+ processors.
+
+ If compiled as a module, it will be called ar7_gpio.
+
config SCx200_GPIO
tristate "NatSemi SCx200 GPIO Support"
depends on SCx200
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 07304d5..15b479d 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_COBALT_LCD) += lcd.o
obj-$(CONFIG_PPDEV) += ppdev.o
obj-$(CONFIG_NWBUTTON) += nwbutton.o
obj-$(CONFIG_NWFLASH) += nwflash.o
+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
diff --git a/drivers/char/ar7_gpio.c b/drivers/char/ar7_gpio.c
new file mode 100644
index 0000000..16460cd
--- /dev/null
+++ b/drivers/char/ar7_gpio.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <gpio.h>
+
+#define DRVNAME "ar7_gpio"
+#define LONGNAME "TI AR7 GPIOs Driver"
+
+MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>");
+MODULE_DESCRIPTION(LONGNAME);
+MODULE_LICENSE("GPL");
+
+static int ar7_gpio_major;
+
+static ssize_t ar7_gpio_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ int pin = iminor(file->f_dentry->d_inode);
+ size_t i;
+
+ for (i = 0; i < len; ++i) {
+ char c;
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ switch (c) {
+ case '0':
+ gpio_set_value(pin, 0);
+ break;
+ case '1':
+ gpio_set_value(pin, 1);
+ break;
+ case 'd':
+ case 'D':
+ ar7_gpio_disable(pin);
+ break;
+ case 'e':
+ case 'E':
+ ar7_gpio_enable(pin);
+ break;
+ case 'i':
+ case 'I':
+ case '<':
+ gpio_direction_input(pin);
+ break;
+ case 'o':
+ case 'O':
+ case '>':
+ gpio_direction_output(pin, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return len;
+}
+
+static ssize_t ar7_gpio_read(struct file *file, char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ int pin = iminor(file->f_dentry->d_inode);
+ int value;
+
+ value = gpio_get_value(pin);
+ if (put_user(value ? '1' : '0', buf))
+ return -EFAULT;
+
+ return 1;
+}
+
+static int ar7_gpio_open(struct inode *inode, struct file *file)
+{
+ int m = iminor(inode);
+
+ if (m >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ return nonseekable_open(inode, file);
+}
+
+static int ar7_gpio_release(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static const struct file_operations ar7_gpio_fops = {
+ .owner = THIS_MODULE,
+ .write = ar7_gpio_write,
+ .read = ar7_gpio_read,
+ .open = ar7_gpio_open,
+ .release = ar7_gpio_release,
+ .llseek = no_llseek,
+};
+
+static struct platform_device *ar7_gpio_device;
+
+static int __init ar7_gpio_init(void)
+{
+ int rc;
+
+ ar7_gpio_device = platform_device_alloc(DRVNAME, -1);
+ if (!ar7_gpio_device)
+ return -ENOMEM;
+
+ rc = platform_device_add(ar7_gpio_device);
+ if (rc < 0)
+ goto out_put;
+
+ rc = register_chrdev(ar7_gpio_major, DRVNAME, &ar7_gpio_fops);
+ if (rc < 0)
+ goto out_put;
+
+ ar7_gpio_major = rc;
+
+ rc = 0;
+
+ goto out;
+
+out_put:
+ platform_device_put(ar7_gpio_device);
+out:
+ return rc;
+}
+
+static void __exit ar7_gpio_exit(void)
+{
+ unregister_chrdev(ar7_gpio_major, DRVNAME);
+ platform_device_unregister(ar7_gpio_device);
+}
+
+module_init(ar7_gpio_init);
+module_exit(ar7_gpio_exit);
next prev parent reply other threads:[~2007-12-27 18:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-27 18:19 [PATCH][MIPS][0/6]: AR7 refresh Matteo Croce
2007-12-27 18:22 ` [PATCH][MIPS][2/6]: AR7 mtd partition map Matteo Croce
2007-12-27 18:24 ` [PATCH][MIPS][3/6]: AR7: VLYNQ bus Matteo Croce
2007-12-27 18:25 ` Matteo Croce [this message]
2007-12-27 18:27 ` [PATCH][MIPS][5/6]: AR7: serial hack Matteo Croce
2007-12-28 12:13 ` Sergei Shtylyov
2007-12-27 18:32 ` [PATCH][MIPS][6/6]: AR7 leds Matteo Croce
2007-12-29 15:12 ` [PATCH][MIPS][1/6]: AR7: core Matteo Croce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200712271925.46306.technoboy85@gmail.com \
--to=technoboy85@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-mips@linux-mips.org \
--cc=nico@openwrt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox