From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Subject: [PATCH] Pb1000: bury the remnants of the PCI code (part 2)
Date: Tue, 29 Apr 2008 23:33:47 +0400 [thread overview]
Message-ID: <200804292333.47099.sshtylyov@ru.mvista.com> (raw)
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
Here's the fragment I missed in the initial patch. Combine them if possible...
arch/mips/au1000/pb1000/board_setup.c | 7 -------
1 files changed, 7 deletions(-)
Index: linux-2.6/arch/mips/au1000/pb1000/board_setup.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/pb1000/board_setup.c
+++ linux-2.6/arch/mips/au1000/pb1000/board_setup.c
@@ -153,13 +153,6 @@ void __init board_setup(void)
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-#ifdef CONFIG_PCI
- au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
- au_writel(0, SDRAM_MBAR); // set mbar to 0
- au_writel(0x2, SDRAM_CMD); // enable memory accesses
- au_sync_delay(1);
-#endif
-
/* Enable Au1000 BCLK switching - note: sed1356 must not use
* its BCLK (Au1000 LCLK) for any timings */
switch (prid & 0x000000FF)
next reply other threads:[~2008-04-29 19:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-29 19:33 Sergei Shtylyov [this message]
2008-05-08 12:13 ` [PATCH] Pb1000: bury the remnants of the PCI code (part 2) Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200804292333.47099.sshtylyov@ru.mvista.com \
--to=sshtylyov@ru.mvista.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox