From: Florian Fainelli <florian@openwrt.org>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Subject: Re: [PATCH 1/2] ar7: fix build failures when CONFIG_SERIAL_8250 is not enabled
Date: Fri, 24 Jul 2009 13:24:15 +0200 [thread overview]
Message-ID: <200907241324.15613.florian@openwrt.org> (raw)
In-Reply-To: <20090721150811.GA18826@linux-mips.org>
Le Tuesday 21 July 2009 17:08:12 Ralf Baechle, vous avez écrit :
> On Tue, Jul 21, 2009 at 12:37:37PM +0200, Florian Fainelli wrote:
> > This patch fixes the following build failure when CONFIG_SERIAL_8250
> > is not enabled in the kernel configuration:
> > arch/mips/ar7/built-in.o: In function `ar7_register_devices':
> > platform.c:(.init.text+0x61c): undefined reference to
> > `early_serial_setup' platform.c:(.init.text+0x61c): relocation truncated
> > to fit: R_MIPS_26 against `early_serial_setup'
> > platform.c:(.init.text+0x68c): undefined reference to
> > `early_serial_setup' platform.c:(.init.text+0x68c): relocation truncated
> > to fit: R_MIPS_26 against `early_serial_setup'
>
> This patch rejects.
The one I sent previously applies to -queue, the one below applies to -master. Thanks !
--
From: Florian Fainelli <florian@openwrt.org>
Subject: [PATCH] ar7: fix build failures when CONFIG_SERIAL_8250 is not enabled
This patch fixes the following build failure when CONFIG_SERIAL_8250
is not enabled in the kernel configuration:
arch/mips/ar7/built-in.o: In function `ar7_register_devices':
platform.c:(.init.text+0x61c): undefined reference to `early_serial_setup'
platform.c:(.init.text+0x61c): relocation truncated to fit: R_MIPS_26 against `early_serial_setup'
platform.c:(.init.text+0x68c): undefined reference to `early_serial_setup'
platform.c:(.init.text+0x68c): relocation truncated to fit: R_MIPS_26 against `early_serial_setup'
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index c4d71fb..8ef8266 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -480,6 +480,7 @@ static void __init detect_leds(void)
static int __init ar7_register_devices(void)
{
int res;
+#ifdef CONFIG_SERIAL_8250
static struct uart_port uart_port[2];
memset(uart_port, 0, sizeof(struct uart_port) * 2);
@@ -511,7 +512,7 @@ static int __init ar7_register_devices(void)
if (res)
return res;
}
-
+#endif /* CONFIG_SERIAL_8250 */
res = platform_device_register(&physmap_flash);
if (res)
return res;
next prev parent reply other threads:[~2009-07-24 11:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-21 10:37 [PATCH 1/2] ar7: fix build failures when CONFIG_SERIAL_8250 is not enabled Florian Fainelli
2009-07-21 15:08 ` Ralf Baechle
2009-07-24 11:24 ` Florian Fainelli [this message]
2009-07-29 21:46 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200907241324.15613.florian@openwrt.org \
--to=florian@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).