From: Florian Fainelli <florian@openwrt.org>
To: Wim Van Sebroeck <wim@iguana.be>
Cc: Ralf Baechle <ralf@linux-mips.org>, linux-mips@linux-mips.org
Subject: Re: [PATCH 2/2] ar7_wdt: convert to become a platform driver
Date: Tue, 11 Aug 2009 14:52:26 +0200 [thread overview]
Message-ID: <200908111452.28418.florian@openwrt.org> (raw)
In-Reply-To: <200907211211.35085.florian@openwrt.org>
Hi Wim,
Le Tuesday 21 July 2009 12:11:32 Florian Fainelli, vous avez écrit :
> Hi Wim,
>
> Le Saturday 18 July 2009 23:49:58 Wim Van Sebroeck, vous avez écrit :
> > Hi Florian,
> >
> > Forgot the attachment...
> >
> > Kind regards,
> > Wim.
> >
> > > Hi Florian,
> > >
> > > > This patch converts the ar7_wdt driver to become a platform
> > > > driver. The AR7 SoC specific identification and base register
> > > > calculation is performed by the board code, therefore we no
> > > > longer need to have access to ar7_chip_id.
> > > >
> > > > @@ -298,22 +285,33 @@ static struct miscdevice ar7_wdt_miscdev = {
> > > > .fops = &ar7_wdt_fops,
> > > > };
> > > >
> > > > -static int __init ar7_wdt_init(void)
> > > > +static int __init ar7_wdt_probe(struct platform_device *pdev)
> > >
> > > Should be __devinit .
> > >
> > > > +static struct platform_driver ar7_wdt_driver = {
> > > > + .driver.name = "ar7_wdt",
> > > > + .probe = ar7_wdt_probe,
> > > > + .remove = __devexit_p(ar7_wdt_remove),
> > > > +};
> > >
> > > I prefer to have it as follows (so that the driver.owner field is also
> > > set): static struct platform_driver ar7_wdt_driver = {
> > > .probe = ar7_wdt_probe,
> > > .remove = __devexit_p(ar7_wdt_remove),
> > > .driver = {
> > > .owner = THIS_MODULE,
> > > .name = "ar7_wdt",
> > > },
> > > };
> > >
> > > I suggest to also change the reboot notifier code into a platform
> > > shutdown method. You then get something like the attached patch
> > > (untested, uncompiled and I included above 2 remarks). For the rest:
> > > code is OK for me. After the __init to __devinit fix you can add my
> > > signed-off-by.
>
> Thanks, patch updated and attached.
>
> > > Kind regards,
> > > Wim.
>
> --
> From: Florian Fainelli <florian@openwrt.org>
> Subject: [PATCH 2/2 v2] ar7_wdt: convert to become a platform driver
>
> This patch converts the ar7_wdt driver to become
> a platform driver. The AR7 SoC specific identification
> and base register calculation is performed by the board
> code, therefore we no longer need to have access to
> ar7_chip_id. We also remove the reboot notifier code to
> use the platform shutdown method as Wim suggested.
>
> Signed-off-by: Florian Fainelli <florian@openwrt.org>
> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Any news on this patch ?
> --
> diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
> index 2f8643e..82855b0 100644
> --- a/drivers/watchdog/ar7_wdt.c
> +++ b/drivers/watchdog/ar7_wdt.c
> @@ -28,9 +28,8 @@
> #include <linux/errno.h>
> #include <linux/init.h>
> #include <linux/miscdevice.h>
> +#include <linux/platform_device.h>
> #include <linux/watchdog.h>
> -#include <linux/notifier.h>
> -#include <linux/reboot.h>
> #include <linux/fs.h>
> #include <linux/ioport.h>
> #include <linux/io.h>
> @@ -76,24 +75,10 @@ static unsigned expect_close;
> /* XXX currently fixed, allows max margin ~68.72 secs */
> #define prescale_value 0xffff
>
> -/* Offset of the WDT registers */
> -static unsigned long ar7_regs_wdt;
> +/* Resource of the WDT registers */
> +static struct resource *ar7_regs_wdt;
> /* Pointer to the remapped WDT IO space */
> static struct ar7_wdt *ar7_wdt;
> -static void ar7_wdt_get_regs(void)
> -{
> - u16 chip_id = ar7_chip_id();
> - switch (chip_id) {
> - case AR7_CHIP_7100:
> - case AR7_CHIP_7200:
> - ar7_regs_wdt = AR7_REGS_WDT;
> - break;
> - default:
> - ar7_regs_wdt = UR8_REGS_WDT;
> - break;
> - }
> -}
> -
>
> static void ar7_wdt_kick(u32 value)
> {
> @@ -202,20 +187,6 @@ static int ar7_wdt_release(struct inode *inode, struct
> file *file) return 0;
> }
>
> -static int ar7_wdt_notify_sys(struct notifier_block *this,
> - unsigned long code, void *unused)
> -{
> - if (code == SYS_HALT || code == SYS_POWER_OFF)
> - if (!nowayout)
> - ar7_wdt_disable_wdt();
> -
> - return NOTIFY_DONE;
> -}
> -
> -static struct notifier_block ar7_wdt_notifier = {
> - .notifier_call = ar7_wdt_notify_sys,
> -};
> -
> static ssize_t ar7_wdt_write(struct file *file, const char *data,
> size_t len, loff_t *ppos)
> {
> @@ -299,56 +270,85 @@ static struct miscdevice ar7_wdt_miscdev = {
> .fops = &ar7_wdt_fops,
> };
>
> -static int __init ar7_wdt_init(void)
> +static int __devinit ar7_wdt_probe(struct platform_device *pdev)
> {
> int rc;
>
> spin_lock_init(&wdt_lock);
>
> - ar7_wdt_get_regs();
> + ar7_regs_wdt =
> + platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> + if (!ar7_regs_wdt) {
> + printk(KERN_ERR DRVNAME ": could not get registers resource\n");
> + rc = -ENODEV;
> + goto out;
> + }
>
> - if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt),
> - LONGNAME)) {
> + if (!request_mem_region(ar7_regs_wdt->start,
> + resource_size(ar7_regs_wdt), LONGNAME)) {
> printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n");
> - return -EBUSY;
> + rc = -EBUSY;
> + goto out;
> }
>
> - ar7_wdt = (struct ar7_wdt *)
> - ioremap(ar7_regs_wdt, sizeof(struct ar7_wdt));
> + ar7_wdt = ioremap(ar7_regs_wdt->start, resource_size(ar7_regs_wdt));
> + if (!ar7_wdt) {
> + printk(KERN_ERR DRVNAME ": could not ioremap registers\n");
> + rc = -ENXIO;
> + goto out;
> + }
>
> ar7_wdt_disable_wdt();
> ar7_wdt_prescale(prescale_value);
> ar7_wdt_update_margin(margin);
>
> - rc = register_reboot_notifier(&ar7_wdt_notifier);
> - if (rc) {
> - printk(KERN_ERR DRVNAME
> - ": unable to register reboot notifier\n");
> - goto out_alloc;
> - }
> -
> rc = misc_register(&ar7_wdt_miscdev);
> if (rc) {
> printk(KERN_ERR DRVNAME ": unable to register misc device\n");
> - goto out_register;
> + goto out_alloc;
> }
> goto out;
>
> -out_register:
> - unregister_reboot_notifier(&ar7_wdt_notifier);
> out_alloc:
> iounmap(ar7_wdt);
> - release_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt));
> + release_mem_region(ar7_regs_wdt->start, resource_size(ar7_regs_wdt));
> out:
> return rc;
> }
>
> -static void __exit ar7_wdt_cleanup(void)
> +static int __devexit ar7_wdt_remove(struct platform_device *pdev)
> {
> misc_deregister(&ar7_wdt_miscdev);
> - unregister_reboot_notifier(&ar7_wdt_notifier);
> iounmap(ar7_wdt);
> - release_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt));
> + release_mem_region(ar7_regs_wdt->start, resource_size(ar7_regs_wdt));
> +
> + return 0;
> +}
> +
> +static void ar7_wdt_shutdown(struct platform_device *pdev)
> +{
> + if (!nowayout)
> + ar7_wdt_disable_wdt();
> +}
> +
> +static struct platform_driver ar7_wdt_driver = {
> + .probe = ar7_wdt_probe,
> + .remove = __devexit_p(ar7_wdt_remove),
> + .shutdown = ar7_wdt_shutdown,
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "ar7_wdt",
> + },
> +};
> +
> +static int __init ar7_wdt_init(void)
> +{
> + return platform_driver_register(&ar7_wdt_driver);
> +}
> +
> +static void __exit ar7_wdt_cleanup(void)
> +{
> + platform_driver_unregister(&ar7_wdt_driver);
> }
>
> module_init(ar7_wdt_init);
--
Best regards, Florian Fainelli
Email: florian@openwrt.org
Web: http://openwrt.org
IRC: [florian] on irc.freenode.net
-------------------------------
next prev parent reply other threads:[~2009-08-11 13:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-15 10:10 [PATCH 2/2] ar7_wdt: convert to become a platform driver Florian Fainelli
2009-07-18 19:09 ` Wim Van Sebroeck
2009-07-18 21:49 ` Wim Van Sebroeck
2009-07-21 10:11 ` Florian Fainelli
2009-08-11 12:52 ` Florian Fainelli [this message]
2009-08-11 13:01 ` Wim Van Sebroeck
2009-08-11 13:17 ` Florian Fainelli
2009-08-27 20:47 ` Wim Van Sebroeck
2009-08-31 13:42 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200908111452.28418.florian@openwrt.org \
--to=florian@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).