From: Yoichi Yuasa <yuasa@linux-mips.org>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: yuasa@linux-mips.org, linux-mips <linux-mips@linux-mips.org>,
Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Subject: [PATCH] MIPS: txx9: remove forced serial console setting
Date: Tue, 2 Feb 2010 18:40:04 +0900 [thread overview]
Message-ID: <20100202184004.efdff568.yuasa@linux-mips.org> (raw)
It is not always used, even if it is available.
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
---
arch/mips/include/asm/txx9/generic.h | 1 -
arch/mips/txx9/generic/setup.c | 5 -----
arch/mips/txx9/jmr3927/setup.c | 7 -------
arch/mips/txx9/rbtx4927/setup.c | 7 -------
arch/mips/txx9/rbtx4938/setup.c | 6 ------
5 files changed, 0 insertions(+), 26 deletions(-)
diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h
index 827dc22..64887d3 100644
--- a/arch/mips/include/asm/txx9/generic.h
+++ b/arch/mips/include/asm/txx9/generic.h
@@ -42,7 +42,6 @@ struct txx9_board_vec {
};
extern struct txx9_board_vec *txx9_board_vec;
extern int (*txx9_irq_dispatch)(int pending);
-char *prom_getcmdline(void);
const char *prom_getenv(const char *name);
void txx9_wdt_init(unsigned long base);
void txx9_wdt_now(unsigned long base);
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index e27809b..7174d83 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -399,11 +399,6 @@ const char *get_system_type(void)
return txx9_system_type;
}
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
const char *__init prom_getenv(const char *name)
{
const s32 *str;
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 25e50a7..3206f76 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -67,8 +67,6 @@ static void jmr3927_board_init(void);
static void __init jmr3927_mem_setup(void)
{
- char *argptr;
-
set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
_machine_restart = jmr3927_machine_restart;
@@ -97,11 +95,6 @@ static void __init jmr3927_mem_setup(void)
jmr3927_board_init();
tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (!strstr(argptr, "console="))
- strcat(argptr, " console=ttyS1,115200");
-#endif
}
static void __init jmr3927_pci_setup(void)
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index ee468ea..b15adfc 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -187,8 +187,6 @@ static void __init rbtx4937_clock_init(void);
static void __init rbtx4927_mem_setup(void)
{
- char *argptr;
-
if (TX4927_REV_PCODE() == 0x4927) {
rbtx4927_clock_init();
tx4927_setup();
@@ -213,11 +211,6 @@ static void __init rbtx4927_mem_setup(void)
gpio_direction_output(15, 1);
tx4927_sio_init(0, 0);
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (!strstr(argptr, "console="))
- strcat(argptr, " console=ttyS0,38400");
-#endif
}
static void __init rbtx4927_clock_init(void)
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index d66509b..d6e70da 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -153,7 +153,6 @@ static void __init rbtx4938_time_init(void)
static void __init rbtx4938_mem_setup(void)
{
unsigned long long pcfg;
- char *argptr;
if (txx9_master_clock == 0)
txx9_master_clock = 25000000; /* 25MHz */
@@ -168,11 +167,6 @@ static void __init rbtx4938_mem_setup(void)
#endif
tx4938_sio_init(7372800, 0);
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (!strstr(argptr, "console="))
- strcat(argptr, " console=ttyS0,38400");
-#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
pr_info("PIOSEL: disabling both ATA and NAND selection\n");
--
1.6.6.1
next reply other threads:[~2010-02-02 9:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-02 9:40 Yoichi Yuasa [this message]
2010-02-02 14:41 ` [PATCH] MIPS: txx9: remove forced serial console setting Atsushi Nemoto
2010-02-02 15:04 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100202184004.efdff568.yuasa@linux-mips.org \
--to=yuasa@linux-mips.org \
--cc=anemo@mba.ocn.ne.jp \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox