Re: [PATCH 2/3] WATCHDOG: mtx1-wdt: request gpio before using it

[Florian Fainelli <florian@openwrt.org>]

Hello Jamie,

On Tuesday 07 June 2011 11:58:47 Jamie Iles wrote:
> On Thu, Jun 02, 2011 at 02:54:20PM +0200, Florian Fainelli wrote:
> > Otherwise, the gpiolib autorequest feature will produce a WARN_ON():
> > 
> > WARNING: at drivers/gpio/gpiolib.c:101 0x8020ec6c()
> > autorequest GPIO-215
> > [...]
> > 
> > CC: stable@kernel.org
> > Signed-off-by: Florian Fainelli <florian@openwrt.org>
> > ---
> > diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
> > index 63df28c..16086f8 100644
> > --- a/drivers/watchdog/mtx-1_wdt.c
> > +++ b/drivers/watchdog/mtx-1_wdt.c
> > @@ -214,6 +214,11 @@ static int __devinit mtx1_wdt_probe(struct
> > platform_device *pdev)
> > 
> >  	int ret;
> >  	
> >  	mtx1_wdt_device.gpio = pdev->resource[0].start;
> > 
> > +	ret = gpio_request(mtx1_wdt_device.gpio, "mtx1-wdt");
> > +	if (ret < 0) {
> > +		dev_err(&pdev->dev, "failed to request gpio");
> > +		return ret;
> > +	}
> 
> Could you use gpio_request_one() here to make sure the GPIO is in the
> correct direction first?

Makes sense, I will respin a v2 of these.
--
Florian