From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
alan@lxorguk.ukuu.org.uk, Gabor Juhos <juhosg@openwrt.org>,
Ralf Baechle <ralf@linux-mips.org>,
linux-mips@linux-mips.org
Subject: [ 52/76] MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs
Date: Thu, 18 Oct 2012 19:47:16 -0700 [thread overview]
Message-ID: <20121019024358.485523281@linuxfoundation.org> (raw)
In-Reply-To: <20121019024350.087156547@linuxfoundation.org>
3.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gabor Juhos <juhosg@openwrt.org>
commit 97541ccfb9db2bb9cd1dde6344d5834438d14bda upstream.
Besides the CPU and DDR PLLs, the CPU and DDR frequencies
can be derived from other PLLs in the SRIF block on the
AR934x SoCs. The current code does not checks if the SRIF
PLLs are used and this can lead to incorrectly calculated
CPU/DDR frequencies.
Fix it by calculating the frequencies from SRIF PLLs if
those are used on a given board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4324/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ath79/clock.c | 109 ++++++++++++++++++-------
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 23 +++++
2 files changed, 104 insertions(+), 28 deletions(-)
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -17,6 +17,8 @@
#include <linux/err.h>
#include <linux/clk.h>
+#include <asm/div64.h>
+
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
@@ -166,11 +168,34 @@ static void __init ar933x_clocks_init(vo
ath79_uart_clk.rate = ath79_ref_clk.rate;
}
+static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
+ u32 frac, u32 out_div)
+{
+ u64 t;
+ u32 ret;
+
+ t = ath79_ref_clk.rate;
+ t *= nint;
+ do_div(t, ref_div);
+ ret = t;
+
+ t = ath79_ref_clk.rate;
+ t *= nfrac;
+ do_div(t, ref_div * frac);
+ ret += t;
+
+ ret /= (1 << out_div);
+ return ret;
+}
+
static void __init ar934x_clocks_init(void)
{
- u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+ u32 pll, out_div, ref_div, nint, nfrac, frac, clk_ctrl, postdiv;
u32 cpu_pll, ddr_pll;
u32 bootstrap;
+ void __iomem *dpll_base;
+
+ dpll_base = ioremap(AR934X_SRIF_BASE, AR934X_SRIF_SIZE);
bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
@@ -178,33 +203,59 @@ static void __init ar934x_clocks_init(vo
else
ath79_ref_clk.rate = 25 * 1000 * 1000;
- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
- AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
- nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
- AR934X_PLL_CPU_CONFIG_NINT_MASK;
- frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
- AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
-
- cpu_pll = nint * ath79_ref_clk.rate / ref_div;
- cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
- cpu_pll /= (1 << out_div);
-
- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
- AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
- nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
- AR934X_PLL_DDR_CONFIG_NINT_MASK;
- frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
- AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
-
- ddr_pll = nint * ath79_ref_clk.rate / ref_div;
- ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
- ddr_pll /= (1 << out_div);
+ pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
+ if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
+ out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
+ AR934X_SRIF_DPLL2_OUTDIV_MASK;
+ pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL1_REG);
+ nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
+ AR934X_SRIF_DPLL1_NINT_MASK;
+ nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
+ ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
+ AR934X_SRIF_DPLL1_REFDIV_MASK;
+ frac = 1 << 18;
+ } else {
+ pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
+ nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NINT_MASK;
+ nfrac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
+ frac = 1 << 6;
+ }
+
+ cpu_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+ nfrac, frac, out_div);
+
+ pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL2_REG);
+ if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
+ out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
+ AR934X_SRIF_DPLL2_OUTDIV_MASK;
+ pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL1_REG);
+ nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
+ AR934X_SRIF_DPLL1_NINT_MASK;
+ nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
+ ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
+ AR934X_SRIF_DPLL1_REFDIV_MASK;
+ frac = 1 << 18;
+ } else {
+ pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
+ nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NINT_MASK;
+ nfrac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
+ frac = 1 << 10;
+ }
+
+ ddr_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+ nfrac, frac, out_div);
clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
@@ -240,6 +291,8 @@ static void __init ar934x_clocks_init(vo
ath79_wdt_clk.rate = ath79_ref_clk.rate;
ath79_uart_clk.rate = ath79_ref_clk.rate;
+
+ iounmap(dpll_base);
}
void __init ath79_clocks_init(void)
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -63,6 +63,8 @@
#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
#define AR934X_WMAC_SIZE 0x20000
+#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
+#define AR934X_SRIF_SIZE 0x1000
/*
* DDR_CTRL block
@@ -399,4 +401,25 @@
#define AR933X_GPIO_COUNT 30
#define AR934X_GPIO_COUNT 23
+/*
+ * SRIF block
+ */
+#define AR934X_SRIF_CPU_DPLL1_REG 0x1c0
+#define AR934X_SRIF_CPU_DPLL2_REG 0x1c4
+#define AR934X_SRIF_CPU_DPLL3_REG 0x1c8
+
+#define AR934X_SRIF_DDR_DPLL1_REG 0x240
+#define AR934X_SRIF_DDR_DPLL2_REG 0x244
+#define AR934X_SRIF_DDR_DPLL3_REG 0x248
+
+#define AR934X_SRIF_DPLL1_REFDIV_SHIFT 27
+#define AR934X_SRIF_DPLL1_REFDIV_MASK 0x1f
+#define AR934X_SRIF_DPLL1_NINT_SHIFT 18
+#define AR934X_SRIF_DPLL1_NINT_MASK 0x1ff
+#define AR934X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff
+
+#define AR934X_SRIF_DPLL2_LOCAL_PLL BIT(30)
+#define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
+#define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
+
#endif /* __ASM_MACH_AR71XX_REGS_H */
parent reply other threads:[~2012-10-19 2:49 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20121019024350.087156547@linuxfoundation.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121019024358.485523281@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=juhosg@openwrt.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox