Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Alban <albeu@free.fr>
To: Alexander Couzens <lynxis@fe80.eu>
Cc: Alban <albeu@free.fr>,
	linux-mips@linux-mips.org, Ralf Baechle <ralf@linux-mips.org>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	devicetree@vger.kernel.org
Subject: Re: [PATCH 2/2] MIPS: ath79: add irq chip ar7240-misc-intc
Date: Thu, 3 Sep 2015 10:34:26 +0200	[thread overview]
Message-ID: <20150903103426.456a0dff@avionic-0020> (raw)
In-Reply-To: <1441251262-13335-3-git-send-email-lynxis@fe80.eu>

On Thu,  3 Sep 2015 05:34:22 +0200
Alexander Couzens <lynxis@fe80.eu> wrote:

> The ar7240 misc irq chip use ack handler
> instead of ack_mask handler. All new ath79 chips use
> the ar7240 misc irq chip
> 
> Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
> ---
>  .../interrupt-controller/qca,ath79-misc-intc.txt       | 18 +++++++++++++++++-
>  arch/mips/ath79/irq.c                                  | 10 ++++++++++
>  2 files changed, 27 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
> index 391717a..56ccaf3 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
> @@ -4,7 +4,7 @@ The MISC interrupt controller is a secondary controller for lower priority
>  interrupt.
>  
>  Required Properties:
> -- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc"
> +- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar{7100,7240}-misc-intc"
>    as fallback
>  - reg: Base address and size of the controllers memory area
>  - interrupt-parent: phandle of the parent interrupt controller.
> @@ -13,6 +13,9 @@ Required Properties:
>  - #interrupt-cells : Specifies the number of cells needed to encode interrupt
>  		     source, should be 1
>  
> +Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
> +use ar7240 for all other SoCs.
> +
>  Please refer to interrupts.txt in this directory for details of the common
>  Interrupt Controllers bindings used by client devices.
>  
> @@ -28,3 +31,16 @@ Example:
>  		interrupt-controller;
>  		#interrupt-cells = <1>;
>  	};
> +
> +Another example:
> +
> +	interrupt-controller@18060010 {
> +		compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
> +		reg = <0x18060010 0x4>;
> +
> +		interrupt-parent = <&cpuintc>;
> +		interrupts = <6>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +	};
> diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
> index 1917f55..7b38958 100644
> --- a/arch/mips/ath79/irq.c
> +++ b/arch/mips/ath79/irq.c
> @@ -320,6 +320,16 @@ static int __init ar7100_misc_intc_of_init(
>  IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc",
>  		ar7100_misc_intc_of_init);
>  
> +static int __init ar7240_misc_intc_of_init(
> +	struct device_node *node, struct device_node *parent)
> +{
> +	ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
> +	return ath79_misc_intc_of_init(node, parent);
> +}
> +
> +IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc",
> +		ar7240_misc_intc_of_init);
> +
>  static int __init ar79_cpu_intc_of_init(
>  	struct device_node *node, struct device_node *parent)
>  {

Acked-by: Alban Bedel <albeu@free.fr>

  reply	other threads:[~2015-09-03  8:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-03  3:34 [PATCH 0/2] ath79 misc irq controller Alexander Couzens
2015-09-03  3:34 ` [PATCH 1/2] MIPS: ath79: set missing irq ack handler for ar7100-misc-intc irq chip Alexander Couzens
2015-09-03  8:32   ` Alban
2015-09-09  9:04     ` Alexander Couzens
2015-09-09 13:52       ` Alban
2015-09-03  3:34 ` [PATCH 2/2] MIPS: ath79: add irq chip ar7240-misc-intc Alexander Couzens
2015-09-03  8:34   ` Alban [this message]
2015-09-03 10:23   ` Mark Rutland
  -- strict thread matches above, loose matches on Subject: below --
2015-09-19  4:26 [PATCH 0/2] v3 ath79 misc irq controller Alexander Couzens
2015-09-19  4:26 ` [PATCH 2/2] MIPS: ath79: add irq chip ar7240-misc-intc Alexander Couzens
2015-09-22 10:24   ` Thomas Gleixner
2015-09-22 17:12     ` Ralf Baechle
2015-08-06 10:43 [PATCH 1/2] MIPS: ath79: set irq ACK handler for ar7100-misc-intc irq chip Alexander Couzens
2015-08-06 10:43 ` [PATCH 2/2] MIPS: ath79: add irq chip ar7240-misc-intc Alexander Couzens
2015-08-10 18:22   ` Alban

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150903103426.456a0dff@avionic-0020 \
    --to=albeu@free.fr \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-mips@linux-mips.org \
    --cc=lynxis@fe80.eu \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox