Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Jaedon Shin <jaedon.shin@gmail.com>
To: Ralf Baechle <ralf@linux-mips.org>,
	James Hogan <james.hogan@mips.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-mips@linux-mips.org, devicetree@vger.kernel.org,
	Jaedon Shin <jaedon.shin@gmail.com>
Subject: [PATCH 3/3] MIPS: BMIPS: Add Broadcom STB watchdog nodes
Date: Fri, 17 Nov 2017 11:19:44 +0900	[thread overview]
Message-ID: <20171117021944.894-4-jaedon.shin@gmail.com> (raw)
In-Reply-To: <20171117021944.894-1-jaedon.shin@gmail.com>

Adds watchdog device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm7125.dtsi      | 7 +++++++
 arch/mips/boot/dts/brcm/bcm7346.dtsi      | 7 +++++++
 arch/mips/boot/dts/brcm/bcm7358.dtsi      | 7 +++++++
 arch/mips/boot/dts/brcm/bcm7360.dtsi      | 7 +++++++
 arch/mips/boot/dts/brcm/bcm7362.dtsi      | 7 +++++++
 arch/mips/boot/dts/brcm/bcm7420.dtsi      | 7 +++++++
 arch/mips/boot/dts/brcm/bcm7425.dtsi      | 7 +++++++
 arch/mips/boot/dts/brcm/bcm7435.dtsi      | 7 +++++++
 arch/mips/boot/dts/brcm/bcm97125cbmb.dts  | 4 ++++
 arch/mips/boot/dts/brcm/bcm97346dbsmb.dts | 4 ++++
 arch/mips/boot/dts/brcm/bcm97358svmb.dts  | 4 ++++
 arch/mips/boot/dts/brcm/bcm97360svmb.dts  | 4 ++++
 arch/mips/boot/dts/brcm/bcm97362svmb.dts  | 4 ++++
 arch/mips/boot/dts/brcm/bcm97420c.dts     | 4 ++++
 arch/mips/boot/dts/brcm/bcm97425svmb.dts  | 4 ++++
 arch/mips/boot/dts/brcm/bcm97435svmb.dts  | 4 ++++
 16 files changed, 88 insertions(+)

diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
index 2f9ef565e5d0..5bf77b6fcceb 100644
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -198,6 +198,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		upg_gio: gpio@406700 {
 			compatible = "brcm,brcmstb-gpio";
 			reg = <0x406700 0x80>;
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index 228184dedada..2afa0dada575 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -233,6 +233,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index 398521c7070f..6375fc77f389 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -217,6 +217,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4066a8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4066a8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408240 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408240 0x30>;
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index 28f5a0c1c149..a57cacea91cf 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -209,6 +209,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4066a8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4066a8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index ab2dd57571a0..728b9e9f84b8 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -205,6 +205,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4066a8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4066a8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
index d262e11bc3f9..9540c27f12e7 100644
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -214,6 +214,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		upg_gio: gpio@406700 {
 			compatible = "brcm,brcmstb-gpio";
 			reg = <0x406700 0x80>;
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 23479f988aa5..410e61ebaf9e 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -232,6 +232,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index af75b0123c06..8398b7f68bf4 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -247,6 +247,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
index 7f59ea2ded6c..79e9769f7e00 100644
--- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -50,6 +50,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 /* FIXME: USB is wonky; disable it for now */
 &ehci0 {
 	status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index b50dbb3cbeee..28370ff77eeb 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -59,6 +59,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index 2986ce353e57..41c1b510c230 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -55,6 +55,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 8d48ae317b8c..9f6c6c9b7ea7 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -50,6 +50,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index 4a1d0631e9e6..df8b755c390f 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -47,6 +47,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
index f96241e94874..086faeaa384a 100644
--- a/arch/mips/boot/dts/brcm/bcm97420c.dts
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -60,6 +60,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 /* FIXME: MAC driver comes up but cannot attach to PHY */
 &enet0 {
 	status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 488e12a9e4aa..0ed22217bf3a 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -61,6 +61,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index e14337cc51fd..2c145a883aef 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -61,6 +61,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
-- 
2.15.0

  parent reply	other threads:[~2017-11-17  2:21 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-17  2:19 [PATCH 0/3] MIPS: BMIPS: Add Broadcom STB device nodes Jaedon Shin
2017-11-17  2:19 ` [PATCH 1/3] MIPS: BMIPS: Add Broadcom STB power management nodes Jaedon Shin
2017-11-17  2:19 ` [PATCH 2/3] MIPS: BMIPS: Add Broadcom STB wake-up timer nodes Jaedon Shin
2017-11-17  2:19 ` Jaedon Shin [this message]
2018-03-06  0:06 ` [PATCH 0/3] MIPS: BMIPS: Add Broadcom STB device nodes Florian Fainelli
2018-03-07 14:41   ` James Hogan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171117021944.894-4-jaedon.shin@gmail.com \
    --to=jaedon.shin@gmail.com \
    --cc=cernekee@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=james.hogan@mips.com \
    --cc=linux-mips@linux-mips.org \
    --cc=mark.rutland@arm.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox