[PATCH AUTOSEL 4.9 12/43] MIPS: ath79: fix system restart

[PATCH AUTOSEL 4.9 12/43] MIPS: ath79: fix system restart

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit f8a7bfe1cb2c1ebfa07775c9c8ac0ad3ba8e5ff5 ]

This patch disables irq on reboot to fix hang issues that were observed
due to pending interrupts.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19913/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/ath79/setup.c                  | 1 +
 arch/mips/include/asm/mach-ath79/ath79.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index f206dafbb0a3..26a058d58d37 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYPE_LEN];
 
 static void ath79_restart(char *command)
 {
+	local_irq_disable();
 	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
 	for (;;)
 		if (cpu_wait)
diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h
index 441faa92c3cd..6e6c0fead776 100644
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -134,6 +134,7 @@ static inline u32 ath79_pll_rr(unsigned reg)
 static inline void ath79_reset_wr(unsigned reg, u32 val)
 {
 	__raw_writel(val, ath79_reset_base + reg);
+	(void) __raw_readl(ath79_reset_base + reg); /* flush */
 }
 
 static inline u32 ath79_reset_rr(unsigned reg)
-- 
2.17.1

[PATCH AUTOSEL 4.9 28/43] MIPS: jz4740: Bump zload address

[Sasha Levin]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit c6ea7e9747318e5a6774995f4f8e3e0f7c0fa8ba ]

Having the zload address at 0x8060.0000 means the size of the
uncompressed kernel cannot be bigger than around 6 MiB, as it is
deflated at address 0x8001.0000.

This limit is too small; a kernel with some built-in drivers and things
like debugfs enabled will already be over 6 MiB in size, and so will
fail to extract properly.

To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000.

This is fine, as all the boards featuring Ingenic JZ SoCs have at least
32 MiB of RAM, and use u-boot or compatible bootloaders which won't
hardcode the load address but read it from the uImage's header.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19787/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/jz4740/Platform | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform
index 28448d358c10..a2a5a85ea1f9 100644
--- a/arch/mips/jz4740/Platform
+++ b/arch/mips/jz4740/Platform
@@ -1,4 +1,4 @@
 platform-$(CONFIG_MACH_INGENIC)	+= jz4740/
 cflags-$(CONFIG_MACH_INGENIC)	+= -I$(srctree)/arch/mips/include/asm/mach-jz4740
 load-$(CONFIG_MACH_INGENIC)	+= 0xffffffff80010000
-zload-$(CONFIG_MACH_INGENIC)	+= 0xffffffff80600000
+zload-$(CONFIG_MACH_INGENIC)	+= 0xffffffff81000000
-- 
2.17.1