Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Thomas Bogendoerfer <tbogendoerfer@suse.de>
To: Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@mips.com>,
	James Hogan <jhogan@kernel.org>, Huacai Chen <chenhc@lemote.com>,
	linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
Cc: rppt@linux.vnet.ibm.com
Subject: [[PATCH]] mips: Fix switch to NO_BOOTMEM for SGI-IP27/loongons3 NUMA
Date: Thu,  8 Nov 2018 15:44:28 +0100	[thread overview]
Message-ID: <20181108144428.28149-1-tbogendoerfer@suse.de> (raw)

Commit bcec54bf3118 ("mips: switch to NO_BOOTMEM") broke SGI-IP27
and NUMA enabled loongson3 by doing memblock_set_current_limit()
before max_low_pfn has been evaluated. Both platforms need to do the
memblock_set_current_limit() in platform specific code. For
consistency the call to memblock_set_current_limit() is moved
to the common bootmem_init(), where max_low_pfn is calculated
for non NUMA enabled platforms.

Fixes: bcec54bf3118 ("mips: switch to NO_BOOTMEM")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 arch/mips/kernel/setup.c               | 18 +++++++++---------
 arch/mips/loongson64/loongson-3/numa.c |  1 +
 arch/mips/sgi-ip27/ip27-memory.c       |  1 +
 3 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index ea09ed6a80a9..b5167b198231 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -576,6 +576,15 @@ static void __init bootmem_init(void)
 	 * Reserve initrd memory if needed.
 	 */
 	finalize_initrd();
+
+	/*
+	 * Prevent memblock from allocating high memory.
+	 * This cannot be done before max_low_pfn is detected, so up
+	 * to this point is possible to only reserve physical memory
+	 * with memblock_reserve; memblock_alloc* can be used
+	 * only after this point
+	 */
+	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
 }
 
 #endif	/* CONFIG_SGI_IP27 */
@@ -854,15 +863,6 @@ static void __init arch_mem_init(char **cmdline_p)
 
 	bootmem_init();
 
-	/*
-	 * Prevent memblock from allocating high memory.
-	 * This cannot be done before max_low_pfn is detected, so up
-	 * to this point is possible to only reserve physical memory
-	 * with memblock_reserve; memblock_alloc* can be used
-	 * only after this point
-	 */
-	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
-
 #ifdef CONFIG_PROC_VMCORE
 	if (setup_elfcorehdr && setup_elfcorehdr_size) {
 		printk(KERN_INFO "kdump reserved memory at %lx-%lx\n",
diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/loongson-3/numa.c
index 622761878cd1..5593a8e3cd88 100644
--- a/arch/mips/loongson64/loongson-3/numa.c
+++ b/arch/mips/loongson64/loongson-3/numa.c
@@ -265,6 +265,7 @@ void __init paging_init(void)
 	zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
 #endif
 	zones_size[ZONE_NORMAL] = max_low_pfn;
+	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
 	free_area_init_nodes(zones_size);
 }
 
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index d8b8444d6795..0d0deeae1f47 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -468,6 +468,7 @@ void __init paging_init(void)
 			max_low_pfn = end_pfn;
 	}
 	zones_size[ZONE_NORMAL] = max_low_pfn;
+	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
 	free_area_init_nodes(zones_size);
 }
 
-- 
2.13.7

             reply	other threads:[~2018-11-08 14:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-08 14:44 Thomas Bogendoerfer [this message]
2018-11-08 16:18 ` [[PATCH]] mips: Fix switch to NO_BOOTMEM for SGI-IP27/loongons3 NUMA Mike Rapoport
2018-11-08 16:52   ` Thomas Bogendoerfer
2018-11-08 18:01     ` Mike Rapoport
     [not found]       ` <tencent_4F1049E7045AD21E19098484@qq.com>
2018-11-09  8:38         ` Mike Rapoport

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181108144428.28149-1-tbogendoerfer@suse.de \
    --to=tbogendoerfer@suse.de \
    --cc=chenhc@lemote.com \
    --cc=jhogan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=rppt@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox