From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Huacai Chen <chenhc@lemote.com>,
Paul Burton <paul.burton@mips.com>,
Ralf Baechle <ralf@linux-mips.org>,
James Hogan <jhogan@kernel.org>,
linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Huacai Chen <chenhuacai@gmail.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.19 075/205] MIPS: Loongson-3: Fix BRIDGE irq delivery problem
Date: Mon, 19 Nov 2018 17:26:22 +0100 [thread overview]
Message-ID: <20181119162630.225691769@linuxfoundation.org> (raw)
In-Reply-To: <20181119162616.586062722@linuxfoundation.org>
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 360fe725f8849aaddc53475fef5d4a0c439b05ae ]
After commit e509bd7da149dc349160 ("genirq: Allow migration of chained
interrupts by installing default action") Loongson-3 fails at here:
setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
This is because both chained_action and cascade_irqaction don't have
IRQF_SHARED flag. This will cause Loongson-3 resume fails because HPET
timer interrupt can't be delivered during S3. So we set the irqchip of
the chained irq to loongson_irq_chip which doesn't disable the chained
irq in CP0.Status.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20434/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/include/asm/mach-loongson64/irq.h | 2 +-
arch/mips/loongson64/loongson-3/irq.c | 13 +++----------
2 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson64/irq.h b/arch/mips/include/asm/mach-loongson64/irq.h
index 3644b68c0ccc..be9f727a9328 100644
--- a/arch/mips/include/asm/mach-loongson64/irq.h
+++ b/arch/mips/include/asm/mach-loongson64/irq.h
@@ -10,7 +10,7 @@
#define MIPS_CPU_IRQ_BASE 56
#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 2) /* UART */
-#define LOONGSON_HT1_IRQ (MIPS_CPU_IRQ_BASE + 3) /* HT1 */
+#define LOONGSON_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 3) /* CASCADE */
#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
#define LOONGSON_HT1_CFG_BASE loongson_sysconf.ht_control_base
diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/loongson-3/irq.c
index 2e115ab66a00..5605061f5f98 100644
--- a/arch/mips/loongson64/loongson-3/irq.c
+++ b/arch/mips/loongson64/loongson-3/irq.c
@@ -96,12 +96,6 @@ void mach_irq_dispatch(unsigned int pending)
}
}
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .flags = IRQF_NO_SUSPEND,
- .name = "cascade",
-};
-
static inline void mask_loongson_irq(struct irq_data *d) { }
static inline void unmask_loongson_irq(struct irq_data *d) { }
@@ -147,11 +141,10 @@ void __init mach_init_irq(void)
irq_set_chip_and_handler(LOONGSON_UART_IRQ,
&loongson_irq_chip, handle_percpu_irq);
+ irq_set_chip_and_handler(LOONGSON_BRIDGE_IRQ,
+ &loongson_irq_chip, handle_percpu_irq);
- /* setup HT1 irq */
- setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
-
- set_c0_status(STATUSF_IP2 | STATUSF_IP6);
+ set_c0_status(STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP6);
}
#ifdef CONFIG_HOTPLUG_CPU
--
2.17.1
prev parent reply other threads:[~2018-11-19 16:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20181119162616.586062722@linuxfoundation.org>
2018-11-19 16:25 ` [PATCH 4.19 025/205] MIPS: kexec: Mark CPU offline before disabling local IRQ Greg Kroah-Hartman
2018-11-19 16:25 ` [PATCH 4.19 028/205] MIPS/PCI: Call pcie_bus_configure_settings() to set MPS/MRRS Greg Kroah-Hartman
2018-11-19 16:26 ` [PATCH 4.19 074/205] MIPS: Loongson-3: Fix CPU UART irq delivery problem Greg Kroah-Hartman
2018-11-19 16:26 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181119162630.225691769@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=chenhc@lemote.com \
--cc=chenhuacai@gmail.com \
--cc=jhogan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
--cc=wuzhangjin@gmail.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).