[PATCH 4.19 11/45] mips: loongson64: lemote-2f: Add IRQF_NO_SUSPEND to "cascade" irqaction.

[PATCH 4.19 11/45] mips: loongson64: lemote-2f: Add IRQF_NO_SUSPEND to "cascade" irqaction.

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yifeng Li <tomli@tomli.me>

commit 5f5f67da9781770df0403269bc57d7aae608fecd upstream.

Timekeeping IRQs from CS5536 MFGPT are routed to i8259, which then
triggers the "cascade" IRQ on MIPS CPU. Without IRQF_NO_SUSPEND in
cascade_irqaction, MFGPT interrupts will be masked in suspend mode,
and the machine would be unable to resume once suspended.

Previously, MIPS IRQs were not disabled properly, so the original
code appeared to work. Commit a3e6c1eff5 ("MIPS: IRQ: Fix disable_irq on
CPU IRQs") uncovers the bug. To fix it, add IRQF_NO_SUSPEND to
cascade_irqaction.

This commit is functionally identical to 0add9c2f1cff ("MIPS:
Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction"), but it forgot
to apply the same fix to Loongson2.

Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/loongson64/lemote-2f/irq.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/loongson64/lemote-2f/irq.c
+++ b/arch/mips/loongson64/lemote-2f/irq.c
@@ -103,7 +103,7 @@ static struct irqaction ip6_irqaction =
 static struct irqaction cascade_irqaction = {
 	.handler = no_action,
 	.name = "cascade",
-	.flags = IRQF_NO_THREAD,
+	.flags = IRQF_NO_THREAD | IRQF_NO_SUSPEND,
 };
 
 void __init mach_init_irq(void)

[PATCH 4.19 13/45] MIPS: Fix kernel crash for R6 in jump label branch function

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Archer Yan <ayan@wavecomp.com>

commit 47c25036b60f27b86ab44b66a8861bcf81cde39b upstream.

Insert Branch instruction instead of NOP to make sure assembler don't
patch code in forbidden slot. In jump label function, it might
be possible to patch Control Transfer Instructions(CTIs) into
forbidden slot, which will generate Reserved Instruction exception
in MIPS release 6.

Signed-off-by: Archer Yan <ayan@wavecomp.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
[paul.burton@mips.com:
  - Add MIPS prefix to subject.
  - Mark for stable from v4.0, which introduced r6 support, onwards.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/jump_label.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/mips/include/asm/jump_label.h
+++ b/arch/mips/include/asm/jump_label.h
@@ -21,15 +21,15 @@
 #endif
 
 #ifdef CONFIG_CPU_MICROMIPS
-#define NOP_INSN "nop32"
+#define B_INSN "b32"
 #else
-#define NOP_INSN "nop"
+#define B_INSN "b"
 #endif
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\t" NOP_INSN "\n\t"
-		"nop\n\t"
+	asm_volatile_goto("1:\t" B_INSN " 2f\n\t"
+		"2:\tnop\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
 		".popsection\n\t"