[PATCH 4.19 86/90] MIPS: Fix bounds check virt_addr_valid

[PATCH 4.19 86/90] MIPS: Fix bounds check virt_addr_valid

[Greg Kroah-Hartman]

From: Hauke Mehrtens <hauke@hauke-m.de>

commit d6ed083f5cc621e15c15b56c3b585fd524dbcb0f upstream.

The bounds check used the uninitialized variable vaddr, it should use
the given parameter kaddr instead. When using the uninitialized value
the compiler assumed it to be 0 and optimized this function to just
return 0 in all cases.

This should make the function check the range of the given address and
only do the page map check in case it is in the expected range of
virtual addresses.

Fixes: 074a1e1167af ("MIPS: Bounds check virt_addr_valid")
Cc: stable@vger.kernel.org # v4.12+
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: f4bug@amsat.org
Cc: linux-mips@vger.kernel.org
Cc: ysu@wavecomp.com
Cc: jcristau@debian.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/mmap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@@ -203,7 +203,7 @@ unsigned long arch_randomize_brk(struct
 
 int __virt_addr_valid(const volatile void *kaddr)
 {
-	unsigned long vaddr = (unsigned long)vaddr;
+	unsigned long vaddr = (unsigned long)kaddr;
 
 	if ((vaddr < PAGE_OFFSET) || (vaddr >= MAP_BASE))
 		return 0;

[PATCH 4.19 87/90] MIPS: Add missing EHB in mtc0 -> mfc0 sequence.

[Greg Kroah-Hartman]

From: Dmitry Korotin <dkorotin@wavecomp.com>

commit 0b24cae4d535045f4c9e177aa228d4e97bad212c upstream.

Add a missing EHB (Execution Hazard Barrier) in mtc0 -> mfc0 sequence.
Without this execution hazard barrier it's possible for the value read
back from the KScratch register to be the value from before the mtc0.

Reproducible on P5600 & P6600.

The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:

   Producer | Consumer | Hazard
  ----------|----------|----------------------------
   mtc0     | mfc0     | any coprocessor 0 register

Signed-off-by: Dmitry Korotin <dkorotin@wavecomp.com>
[paul.burton@mips.com:
  - Commit message tweaks.
  - Add Fixes tags.
  - Mark for stable back to v3.15 where P5600 support was introduced.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3d8bfdd03072 ("MIPS: Use C0_KScratch (if present) to hold PGD pointer.")
Fixes: 829dcc0a956a ("MIPS: Add MIPS P5600 probe support")
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/tlbex.c |   29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -391,6 +391,7 @@ static struct work_registers build_get_w
 static void build_restore_work_registers(u32 **p)
 {
 	if (scratch_reg >= 0) {
+		uasm_i_ehb(p);
 		UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
 		return;
 	}
@@ -667,10 +668,12 @@ static void build_restore_pagemask(u32 *
 			uasm_i_mtc0(p, 0, C0_PAGEMASK);
 			uasm_il_b(p, r, lid);
 		}
-		if (scratch_reg >= 0)
+		if (scratch_reg >= 0) {
+			uasm_i_ehb(p);
 			UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-		else
+		} else {
 			UASM_i_LW(p, 1, scratchpad_offset(0), 0);
+		}
 	} else {
 		/* Reset default page size */
 		if (PM_DEFAULT_MASK >> 16) {
@@ -935,10 +938,12 @@ build_get_pgd_vmalloc64(u32 **p, struct
 		uasm_i_jr(p, ptr);
 
 		if (mode == refill_scratch) {
-			if (scratch_reg >= 0)
+			if (scratch_reg >= 0) {
+				uasm_i_ehb(p);
 				UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-			else
+			} else {
 				UASM_i_LW(p, 1, scratchpad_offset(0), 0);
+			}
 		} else {
 			uasm_i_nop(p);
 		}
@@ -1255,6 +1260,7 @@ build_fast_tlb_refill_handler (u32 **p,
 	UASM_i_MTC0(p, odd, C0_ENTRYLO1); /* load it */
 
 	if (c0_scratch_reg >= 0) {
+		uasm_i_ehb(p);
 		UASM_i_MFC0(p, scratch, c0_kscratch(), c0_scratch_reg);
 		build_tlb_write_entry(p, l, r, tlb_random);
 		uasm_l_leave(l, *p);
@@ -1600,15 +1606,17 @@ static void build_setup_pgd(void)
 		uasm_i_dinsm(&p, a0, 0, 29, 64 - 29);
 		uasm_l_tlbl_goaround1(&l, p);
 		UASM_i_SLL(&p, a0, a0, 11);
-		uasm_i_jr(&p, 31);
 		UASM_i_MTC0(&p, a0, C0_CONTEXT);
+		uasm_i_jr(&p, 31);
+		uasm_i_ehb(&p);
 	} else {
 		/* PGD in c0_KScratch */
-		uasm_i_jr(&p, 31);
 		if (cpu_has_ldpte)
 			UASM_i_MTC0(&p, a0, C0_PWBASE);
 		else
 			UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
+		uasm_i_jr(&p, 31);
+		uasm_i_ehb(&p);
 	}
 #else
 #ifdef CONFIG_SMP
@@ -1622,13 +1630,16 @@ static void build_setup_pgd(void)
 	UASM_i_LA_mostly(&p, a2, pgdc);
 	UASM_i_SW(&p, a0, uasm_rel_lo(pgdc), a2);
 #endif /* SMP */
-	uasm_i_jr(&p, 31);
 
 	/* if pgd_reg is allocated, save PGD also to scratch register */
-	if (pgd_reg != -1)
+	if (pgd_reg != -1) {
 		UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
-	else
+		uasm_i_jr(&p, 31);
+		uasm_i_ehb(&p);
+	} else {
+		uasm_i_jr(&p, 31);
 		uasm_i_nop(&p);
+	}
 #endif
 	if (p >= (u32 *)tlbmiss_handler_setup_pgd_end)
 		panic("tlbmiss_handler_setup_pgd space exceeded");

[PATCH 4.19 88/90] MIPS: have "plain" make calls build dtbs for selected platforms

[Greg Kroah-Hartman]

From: Cedric Hombourger <Cedric_Hombourger@mentor.com>

commit 637dfa0fad6d91a9a709dc70549a6d20fa77f615 upstream.

scripts/package/builddeb calls "make dtbs_install" after executing
a plain make (i.e. no build targets specified). It will fail if dtbs
were not built beforehand. Match the arm64 architecture where DTBs get
built by the "all" target.

Signed-off-by: Cedric Hombourger <Cedric_Hombourger@mentor.com>
[paul.burton@mips.com: s/builddep/builddeb]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/Makefile |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -16,6 +16,7 @@ archscripts: scripts_basic
 	$(Q)$(MAKE) $(build)=arch/mips/boot/tools relocs
 
 KBUILD_DEFCONFIG := 32r2el_defconfig
+KBUILD_DTBS      := dtbs
 
 #
 # Select the object file format to substitute into the linker script.
@@ -385,7 +386,7 @@ quiet_cmd_64 = OBJCOPY $@
 vmlinux.64: vmlinux
 	$(call cmd,64)
 
-all:	$(all-y)
+all:	$(all-y) $(KBUILD_DTBS)
 
 # boot
 $(boot-y): $(vmlinux-32) FORCE