[PATCH mips/linux.git 4/5] firmware: bcm47xx_nvram: look for NVRAM with for instead of while

["Rafał Miłecki" <zajec5@gmail.com>]

From: Rafał Miłecki <rafal@milecki.pl>

This loop requires variable initialization, stop condition and post
iteration increment. It's pretty much a for loop definition.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/firmware/broadcom/bcm47xx_nvram.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
index 09f51b95849e..1d2271b1e07a 100644
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -93,15 +93,13 @@ static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_siz
 	}
 
 	/* TODO: when nvram is on nand flash check for bad blocks first. */
-	flash_size = FLASH_MIN;
-	while (flash_size <= res_size) {
+	for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) {
 		/* Windowed flash access */
 		size = find_nvram_size(flash_start + flash_size);
 		if (size) {
 			offset = flash_size - size;
 			goto found;
 		}
-		flash_size <<= 1;
 	}
 
 	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
-- 
2.26.2