From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-mips@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Randy Dunlap <rdunlap@infradead.org>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
Vlastimil Babka <vbabka@suse.cz>,
Jinyang He <hejinyang@loongson.cn>,
Kees Cook <keescook@chromium.org>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Anshuman Khandual <anshuman.khandual@arm.com>,
Liangliang Huang <huanglllzu@gmail.com>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] MIPS: Add support for CONFIG_DEBUG_VIRTUAL
Date: Fri, 19 Mar 2021 12:24:32 -0700 [thread overview]
Message-ID: <20210319192440.2019371-1-f.fainelli@gmail.com> (raw)
Provide hooks to intercept bad usages of virt_to_phys() and
__pa_symbol() throughout the kernel. To make this possible, we need to
rename the current implement of virt_to_phys() into
__virt_to_phys_nodebug() and wrap it around depending on
CONFIG_DEBUG_VIRTUAL.
A similar thing is needed for __pa_symbol() which is now aliased to
__phys_addr_symbol() whose implementation is either the direct return of
RELOC_HIDE or goes through the debug version.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/mips/Kconfig | 1 +
arch/mips/include/asm/io.h | 14 ++++++++-
arch/mips/include/asm/page.h | 9 +++++-
arch/mips/mm/Makefile | 2 ++
arch/mips/mm/physaddr.c | 55 ++++++++++++++++++++++++++++++++++++
5 files changed, 79 insertions(+), 2 deletions(-)
create mode 100644 arch/mips/mm/physaddr.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d89efba3d8a4..0904d6351808 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -4,6 +4,7 @@ config MIPS
default y
select ARCH_32BIT_OFF_T if !64BIT
select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
+ select ARCH_HAS_DEBUG_VIRTUAL if !64BIT
select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_KCOV
select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 78537aa23500..2c138450ad3b 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -100,11 +100,23 @@ static inline void set_io_port_base(unsigned long base)
* almost all conceivable cases a device driver should not be using
* this function
*/
-static inline unsigned long virt_to_phys(volatile const void *address)
+static inline unsigned long __virt_to_phys_nodebug(volatile const void *address)
{
return __pa(address);
}
+#ifdef CONFIG_DEBUG_VIRTUAL
+extern phys_addr_t __virt_to_phys(volatile const void *x);
+#else
+#define __virt_to_phys(x) __virt_to_phys_nodebug(x)
+#endif
+
+#define virt_to_phys virt_to_phys
+static inline phys_addr_t virt_to_phys(const volatile void *x)
+{
+ return __virt_to_phys(x);
+}
+
/*
* phys_to_virt - map physical address to virtual
* @address: address to remap
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 65acab9c41f9..195ff4e9771f 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -210,9 +210,16 @@ static inline unsigned long ___pa(unsigned long x)
* also affect MIPS so we keep this one until GCC 3.x has been retired
* before we can apply https://patchwork.linux-mips.org/patch/1541/
*/
+#define __pa_symbol_nodebug(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+extern phys_addr_t __phys_addr_symbol(unsigned long x);
+#else
+#define __phys_addr_symbol(x) __pa_symbol_nodebug(x)
+#endif
#ifndef __pa_symbol
-#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
+#define __pa_symbol(x) __phys_addr_symbol((unsigned long)(x))
#endif
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 865926a37775..fa1f729e0700 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -40,3 +40,5 @@ obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o
obj-$(CONFIG_SCACHE_DEBUGFS) += sc-debugfs.o
+
+obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
diff --git a/arch/mips/mm/physaddr.c b/arch/mips/mm/physaddr.c
new file mode 100644
index 000000000000..008b524a96b2
--- /dev/null
+++ b/arch/mips/mm/physaddr.c
@@ -0,0 +1,55 @@
+#include <linux/bug.h>
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/mmdebug.h>
+#include <linux/mm.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+
+static inline bool __debug_virt_addr_valid(unsigned long x)
+{
+ /* high_memory does not get immediately defined, and there
+ * are early callers of __pa() against PAGE_OFFSET
+ */
+ if (!high_memory && x >= PAGE_OFFSET)
+ return true;
+
+ if (high_memory && x >= PAGE_OFFSET && x < (unsigned long)high_memory)
+ return true;
+
+ /*
+ * MAX_DMA_ADDRESS is a virtual address that may not correspond to an
+ * actual physical address. Enough code relies on
+ * virt_to_phys(MAX_DMA_ADDRESS) that we just need to work around it
+ * and always return true.
+ */
+ if (x == MAX_DMA_ADDRESS)
+ return true;
+
+ return false;
+}
+
+phys_addr_t __virt_to_phys(volatile const void *x)
+{
+ WARN(!__debug_virt_addr_valid((unsigned long)x),
+ "virt_to_phys used for non-linear address: %pK (%pS)\n",
+ x, x);
+
+ return __virt_to_phys_nodebug(x);
+}
+EXPORT_SYMBOL(__virt_to_phys);
+
+phys_addr_t __phys_addr_symbol(unsigned long x)
+{
+ /* This is bounds checking against the kernel image only.
+ * __pa_symbol should only be used on kernel symbol addresses.
+ */
+ VIRTUAL_BUG_ON(x < (unsigned long)_text ||
+ x > (unsigned long)_end);
+
+ return __pa_symbol_nodebug(x);
+}
+EXPORT_SYMBOL(__phys_addr_symbol);
--
2.25.1
next reply other threads:[~2021-03-19 19:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-19 19:24 Florian Fainelli [this message]
2021-03-20 0:50 ` [PATCH] MIPS: Add support for CONFIG_DEBUG_VIRTUAL kernel test robot
-- strict thread matches above, loose matches on Subject: below --
2017-03-28 17:57 Florian Fainelli
2017-08-23 17:29 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210319192440.2019371-1-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=anshuman.khandual@arm.com \
--cc=geert@linux-m68k.org \
--cc=hejinyang@loongson.cn \
--cc=huanglllzu@gmail.com \
--cc=jiaxun.yang@flygoat.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=rdunlap@infradead.org \
--cc=tsbogend@alpha.franken.de \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).