[PATCH AUTOSEL 5.17 110/149] mips: ralink: fix a refcount leak in ill_acc_of_setup()

[PATCH AUTOSEL 5.17 110/149] mips: ralink: fix a refcount leak in ill_acc_of_setup()

[Sasha Levin]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit 4a0a1436053b17e50b7c88858fb0824326641793 ]

of_node_put(np) needs to be called when pdev == NULL.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/ralink/ill_acc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
index 115a69fc20ca..f395ae218470 100644
--- a/arch/mips/ralink/ill_acc.c
+++ b/arch/mips/ralink/ill_acc.c
@@ -61,6 +61,7 @@ static int __init ill_acc_of_setup(void)
 	pdev = of_find_device_by_node(np);
 	if (!pdev) {
 		pr_err("%pOFn: failed to lookup pdev\n", np);
+		of_node_put(np);
 		return -EINVAL;
 	}
 
-- 
2.34.1

[PATCH AUTOSEL 5.17 121/149] MIPS: fix fortify panic when copying asm exception handlers

[Sasha Levin]

From: Alexander Lobakin <alobakin@pm.me>

[ Upstream commit d17b66417308996e7e64b270a3c7f3c1fbd4cfc8 ]

With KCFLAGS="-O3", I was able to trigger a fortify-source
memcpy() overflow panic on set_vi_srs_handler().
Although O3 level is not supported in the mainline, under some
conditions that may've happened with any optimization settings,
it's just a matter of inlining luck. The panic itself is correct,
more precisely, 50/50 false-positive and not at the same time.
From the one side, no real overflow happens. Exception handler
defined in asm just gets copied to some reserved places in the
memory.
But the reason behind is that C code refers to that exception
handler declares it as `char`, i.e. something of 1 byte length.
It's obvious that the asm function itself is way more than 1 byte,
so fortify logics thought we are going to past the symbol declared.
The standard way to refer to asm symbols from C code which is not
supposed to be called from C is to declare them as
`extern const u8[]`. This is fully correct from any point of view,
as any code itself is just a bunch of bytes (including 0 as it is
for syms like _stext/_etext/etc.), and the exact size is not known
at the moment of compilation.
Adjust the type of the except_vec_vi_*() and related variables.
Make set_handler() take `const` as a second argument to avoid
cast-away warnings and give a little more room for optimization.

Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/setup.h |  2 +-
 arch/mips/kernel/traps.c      | 22 +++++++++++-----------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h
index bb36a400203d..8c56b862fd9c 100644
--- a/arch/mips/include/asm/setup.h
+++ b/arch/mips/include/asm/setup.h
@@ -16,7 +16,7 @@ static inline void setup_8250_early_printk_port(unsigned long base,
 	unsigned int reg_shift, unsigned int timeout) {}
 #endif
 
-extern void set_handler(unsigned long offset, void *addr, unsigned long len);
+void set_handler(unsigned long offset, const void *addr, unsigned long len);
 extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
 
 typedef void (*vi_handler_t)(void);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index a486486b2355..246c6a6b0261 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2091,19 +2091,19 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		 * If no shadow set is selected then use the default handler
 		 * that does normal register saving and standard interrupt exit
 		 */
-		extern char except_vec_vi, except_vec_vi_lui;
-		extern char except_vec_vi_ori, except_vec_vi_end;
-		extern char rollback_except_vec_vi;
-		char *vec_start = using_rollback_handler() ?
-			&rollback_except_vec_vi : &except_vec_vi;
+		extern const u8 except_vec_vi[], except_vec_vi_lui[];
+		extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
+		extern const u8 rollback_except_vec_vi[];
+		const u8 *vec_start = using_rollback_handler() ?
+				      rollback_except_vec_vi : except_vec_vi;
 #if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
-		const int lui_offset = &except_vec_vi_lui - vec_start + 2;
-		const int ori_offset = &except_vec_vi_ori - vec_start + 2;
+		const int lui_offset = except_vec_vi_lui - vec_start + 2;
+		const int ori_offset = except_vec_vi_ori - vec_start + 2;
 #else
-		const int lui_offset = &except_vec_vi_lui - vec_start;
-		const int ori_offset = &except_vec_vi_ori - vec_start;
+		const int lui_offset = except_vec_vi_lui - vec_start;
+		const int ori_offset = except_vec_vi_ori - vec_start;
 #endif
-		const int handler_len = &except_vec_vi_end - vec_start;
+		const int handler_len = except_vec_vi_end - vec_start;
 
 		if (handler_len > VECTORSPACING) {
 			/*
@@ -2311,7 +2311,7 @@ void per_cpu_trap_init(bool is_boot_cpu)
 }
 
 /* Install CPU exception handler */
-void set_handler(unsigned long offset, void *addr, unsigned long size)
+void set_handler(unsigned long offset, const void *addr, unsigned long size)
 {
 #ifdef CONFIG_CPU_MICROMIPS
 	memcpy((void *)(ebase + offset), ((unsigned char *)addr - 1), size);
-- 
2.34.1

[PATCH AUTOSEL 5.17 141/149] MIPS: ingenic: correct unit node address

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit 8931ddd8d6a55fcefb20f44a38ba42bb746f0b62 ]

Unit node addresses should not have leading 0x:

  Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x"

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/ingenic/jz4780.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 3f9ea47a10cd..b998301f179c 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -510,7 +510,7 @@ efuse: efuse@d0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			eth0_addr: eth-mac-addr@0x22 {
+			eth0_addr: eth-mac-addr@22 {
 				reg = <0x22 0x6>;
 			};
 		};
-- 
2.34.1