From: "Nuno Sá" <nuno.sa@analog.com>
To: <linux-arm-msm@vger.kernel.org>, <openbmc@lists.ozlabs.org>,
<linux-renesas-soc@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>, <linux-imx@nxp.com>,
<linux-mips@vger.kernel.org>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
<linux-iio@vger.kernel.org>, <chrome-platform@lists.linux.dev>,
<linux-arm-kernel@lists.infradead.org>,
<linux-stm32@st-md-mailman.stormreply.com>
Cc: Andy Gross <agross@kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Benson Leung <bleung@chromium.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Tomer Maimon <tmaimon77@gmail.com>,
Zhang Rui <rui.zhang@intel.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Eugen Hristev <eugen.hristev@microchip.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Benjamin Fair <benjaminfair@google.com>,
Nancy Yuen <yuenn@google.com>,
Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
Jishnu Prakash <quic_jprakash@quicinc.com>,
Christophe Branchereau <cbranchereau@gmail.com>,
Avi Fishman <avifishman70@gmail.com>,
Tali Perry <tali.perry1@gmail.com>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Thara Gopinath <thara.gopinath@linaro.org>,
Cai Huoqing <cai.huoqing@linux.dev>,
Fabio Estevam <festevam@gmail.com>,
Olivier Moysan <olivier.moysan@foss.st.com>,
Shawn Guo <shawnguo@kernel.org>, Haibo Chen <haibo.chen@nxp.com>,
Arnd Bergmann <arnd@arndb.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Patrick Venture <venture@google.com>,
Amit Kucheria <amitk@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Paul Cercueil <paul@crapouillou.net>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Gwendal Grignou <gwendal@chromium.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Saravanan Sekar <sravanhome@gmail.com>,
Guenter Roeck <groeck@chromium.org>,
Jonathan Cameron <jic23@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH v2 10/15] iio: adc: qcom-pm8xxx-xoadc: convert to device properties
Date: Mon, 11 Jul 2022 14:38:30 +0200 [thread overview]
Message-ID: <20220711123835.811358-11-nuno.sa@analog.com> (raw)
In-Reply-To: <20220711123835.811358-1-nuno.sa@analog.com>
Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/iio/adc/qcom-pm8xxx-xoadc.c | 58 ++++++++++++++---------------
1 file changed, 28 insertions(+), 30 deletions(-)
diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index 5e9e56821075..eb424496ee1d 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -14,9 +14,9 @@
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -694,8 +694,8 @@ static int pm8xxx_read_raw(struct iio_dev *indio_dev,
}
}
-static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static int pm8xxx_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
u8 pre_scale_mux;
@@ -706,10 +706,10 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
* First cell is prescaler or premux, second cell is analog
* mux.
*/
- if (iiospec->args_count != 2) {
- dev_err(&indio_dev->dev, "wrong number of arguments for %pOFn need 2 got %d\n",
- iiospec->np,
- iiospec->args_count);
+ if (iiospec->nargs != 2) {
+ dev_err(&indio_dev->dev, "wrong number of arguments for %pfwP need 2 got %d\n",
+ iiospec->fwnode,
+ iiospec->nargs);
return -EINVAL;
}
pre_scale_mux = (u8)iiospec->args[0];
@@ -727,34 +727,34 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
}
static const struct iio_info pm8xxx_xoadc_info = {
- .of_xlate = pm8xxx_of_xlate,
+ .fwnode_xlate = pm8xxx_fwnode_xlate,
.read_raw = pm8xxx_read_raw,
};
static int pm8xxx_xoadc_parse_channel(struct device *dev,
- struct device_node *np,
+ struct fwnode_handle *fwnode,
const struct xoadc_channel *hw_channels,
struct iio_chan_spec *iio_chan,
struct pm8xxx_chan_info *ch)
{
- const char *name = np->name;
+ const char *name = fwnode_get_name(fwnode);
const struct xoadc_channel *hwchan;
- u32 pre_scale_mux, amux_channel;
+ u32 pre_scale_mux, amux_channel, reg[2];
u32 rsv, dec;
int ret;
int chid;
- ret = of_property_read_u32_index(np, "reg", 0, &pre_scale_mux);
+ ret = fwnode_property_read_u32_array(fwnode, "reg", reg,
+ ARRAY_SIZE(reg));
if (ret) {
- dev_err(dev, "invalid pre scale/mux number %s\n", name);
- return ret;
- }
- ret = of_property_read_u32_index(np, "reg", 1, &amux_channel);
- if (ret) {
- dev_err(dev, "invalid amux channel number %s\n", name);
+ dev_err(dev, "invalid pre scale/mux or amux channel number %s\n",
+ name);
return ret;
}
+ pre_scale_mux = reg[0];
+ amux_channel = reg[1];
+
/* Find the right channel setting */
chid = 0;
hwchan = &hw_channels[0];
@@ -778,7 +778,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
/* Everyone seems to use default ("type 2") decimation */
ch->decimation = VADC_DEF_DECIMATION;
- if (!of_property_read_u32(np, "qcom,ratiometric", &rsv)) {
+ if (!fwnode_property_read_u32(fwnode, "qcom,ratiometric", &rsv)) {
ch->calibration = VADC_CALIB_RATIOMETRIC;
if (rsv > XOADC_RSV_MAX) {
dev_err(dev, "%s too large RSV value %d\n", name, rsv);
@@ -791,7 +791,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
}
/* Optional decimation, if omitted we use the default */
- ret = of_property_read_u32(np, "qcom,decimation", &dec);
+ ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &dec);
if (!ret) {
ret = qcom_vadc_decimation_from_dt(dec);
if (ret < 0) {
@@ -820,15 +820,14 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
return 0;
}
-static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc,
- struct device_node *np)
+static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc)
{
- struct device_node *child;
+ struct fwnode_handle *child;
struct pm8xxx_chan_info *ch;
int ret;
int i;
- adc->nchans = of_get_available_child_count(np);
+ adc->nchans = device_get_child_node_count(adc->dev);
if (!adc->nchans) {
dev_err(adc->dev, "no channel children\n");
return -ENODEV;
@@ -846,14 +845,14 @@ static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc,
return -ENOMEM;
i = 0;
- for_each_available_child_of_node(np, child) {
+ device_for_each_child_node(adc->dev, child) {
ch = &adc->chans[i];
ret = pm8xxx_xoadc_parse_channel(adc->dev, child,
adc->variant->channels,
&adc->iio_chans[i],
ch);
if (ret) {
- of_node_put(child);
+ fwnode_handle_put(child);
return ret;
}
i++;
@@ -884,12 +883,11 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev)
const struct xoadc_variant *variant;
struct pm8xxx_xoadc *adc;
struct iio_dev *indio_dev;
- struct device_node *np = pdev->dev.of_node;
struct regmap *map;
struct device *dev = &pdev->dev;
int ret;
- variant = of_device_get_match_data(dev);
+ variant = device_get_match_data(dev);
if (!variant)
return -ENODEV;
@@ -904,7 +902,7 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev)
init_completion(&adc->complete);
mutex_init(&adc->lock);
- ret = pm8xxx_xoadc_parse_channels(adc, np);
+ ret = pm8xxx_xoadc_parse_channels(adc);
if (ret)
return ret;
--
2.37.0
next prev parent reply other threads:[~2022-07-11 12:40 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-11 12:38 [PATCH v2 00/15] make iio inkern interface firmware agnostic Nuno Sá
2022-07-11 12:38 ` [PATCH v2 01/15] iio: inkern: only release the device node when done with it Nuno Sá
2022-07-11 13:09 ` Andy Shevchenko
2022-07-11 12:38 ` [PATCH v2 02/15] iio: inkern: fix return value in devm_of_iio_channel_get_by_name() Nuno Sá
2022-07-11 12:38 ` [PATCH v2 03/15] iio: inkern: only return error codes in iio_channel_get_*() APIs Nuno Sá
2022-07-11 13:29 ` Andy Shevchenko
2022-07-11 14:06 ` Nuno Sá
2022-07-11 12:38 ` [PATCH v2 04/15] iio: inkern: split of_iio_channel_get_by_name() Nuno Sá
2022-07-11 12:38 ` [PATCH v2 05/15] iio: inkern: move to fwnode properties Nuno Sá
2022-07-11 12:38 ` [PATCH v2 06/15] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API Nuno Sá
2022-07-11 12:38 ` [PATCH v2 07/15] iio: adc: ingenic-adc: convert to IIO fwnode interface Nuno Sá
2022-07-11 12:38 ` [PATCH v2 08/15] iio: adc: ab8500-gpadc: convert to device properties Nuno Sá
2022-07-11 12:38 ` [PATCH v2 09/15] iio: adc: at91-sama5d2_adc: " Nuno Sá
2022-07-11 12:38 ` Nuno Sá [this message]
2022-07-11 12:38 ` [PATCH v2 11/15] iio: adc: qcom-spmi-vadc: " Nuno Sá
2022-07-11 12:38 ` [PATCH v2 12/15] iio: adc: qcom-spmi-adc5: " Nuno Sá
2022-07-11 12:38 ` [PATCH v2 13/15] iio: adc: stm32-adc: " Nuno Sá
2022-07-11 14:04 ` Fabrice Gasnier
2022-07-12 10:33 ` Nuno Sá
2022-07-13 15:48 ` Fabrice Gasnier
2022-07-15 11:22 ` Nuno Sá
2022-07-11 12:38 ` [PATCH v2 14/15] iio: inkern: remove OF dependencies Nuno Sá
2022-07-11 12:38 ` [PATCH v2 15/15] iio: inkern: fix coding style warnings Nuno Sá
2022-07-11 13:15 ` Andy Shevchenko
2022-07-11 13:28 ` Biju Das
2022-07-11 13:32 ` Andy Shevchenko
2022-07-11 13:37 ` Biju Das
2022-07-11 14:05 ` Nuno Sá
2022-07-11 13:22 ` [PATCH v2 00/15] make iio inkern interface firmware agnostic Andy Shevchenko
2022-07-11 14:04 ` Nuno Sá
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220711123835.811358-11-nuno.sa@analog.com \
--to=nuno.sa@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=agross@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=amitk@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=arnd@arndb.de \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=bleung@chromium.org \
--cc=cai.huoqing@linux.dev \
--cc=cbranchereau@gmail.com \
--cc=chrome-platform@lists.linux.dev \
--cc=claudiu.beznea@microchip.com \
--cc=daniel.lezcano@linaro.org \
--cc=eugen.hristev@microchip.com \
--cc=fabrice.gasnier@foss.st.com \
--cc=festevam@gmail.com \
--cc=groeck@chromium.org \
--cc=gwendal@chromium.org \
--cc=haibo.chen@nxp.com \
--cc=jic23@kernel.org \
--cc=kernel@pengutronix.de \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=nicolas.ferre@microchip.com \
--cc=olivier.moysan@foss.st.com \
--cc=openbmc@lists.ozlabs.org \
--cc=paul@crapouillou.net \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=quic_jprakash@quicinc.com \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=sravanhome@gmail.com \
--cc=tali.perry1@gmail.com \
--cc=thara.gopinath@linaro.org \
--cc=tmaimon77@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).