linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Nuno Sá" <nuno.sa@analog.com>
To: <linux-arm-msm@vger.kernel.org>, <openbmc@lists.ozlabs.org>,
	<linux-renesas-soc@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>, <linux-imx@nxp.com>,
	<linux-mips@vger.kernel.org>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	<linux-iio@vger.kernel.org>, <chrome-platform@lists.linux.dev>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-stm32@st-md-mailman.stormreply.com>
Cc: Andy Gross <agross@kernel.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Benson Leung <bleung@chromium.org>,
	"Matthias Brugger" <matthias.bgg@gmail.com>,
	Tomer Maimon <tmaimon77@gmail.com>,
	"Zhang Rui" <rui.zhang@intel.com>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	"Eugen Hristev" <eugen.hristev@microchip.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Benjamin Fair <benjaminfair@google.com>,
	Nancy Yuen <yuenn@google.com>,
	Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
	Jishnu Prakash <quic_jprakash@quicinc.com>,
	Christophe Branchereau <cbranchereau@gmail.com>,
	Avi Fishman <avifishman70@gmail.com>,
	Tali Perry <tali.perry1@gmail.com>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Thara Gopinath <thara.gopinath@linaro.org>,
	Cai Huoqing <cai.huoqing@linux.dev>,
	"Fabio Estevam" <festevam@gmail.com>,
	Olivier Moysan <olivier.moysan@foss.st.com>,
	Shawn Guo <shawnguo@kernel.org>, Haibo Chen <haibo.chen@nxp.com>,
	"Arnd Bergmann" <arnd@arndb.de>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	"Patrick Venture" <venture@google.com>,
	Amit Kucheria <amitk@kernel.org>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	Lorenzo Bianconi <lorenzo@kernel.org>,
	Paul Cercueil <paul@crapouillou.net>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Gwendal Grignou <gwendal@chromium.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Saravanan Sekar <sravanhome@gmail.com>,
	"Guenter Roeck" <groeck@chromium.org>,
	Jonathan Cameron <jic23@kernel.org>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH v2 12/15] iio: adc: qcom-spmi-adc5: convert to device properties
Date: Mon, 11 Jul 2022 14:38:32 +0200	[thread overview]
Message-ID: <20220711123835.811358-13-nuno.sa@analog.com> (raw)
In-Reply-To: <20220711123835.811358-1-nuno.sa@analog.com>

Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/iio/adc/qcom-spmi-adc5.c | 63 +++++++++++++++-----------------
 1 file changed, 30 insertions(+), 33 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index 87438d1e5c0b..a23f9293d6c1 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -14,9 +14,9 @@
 #include <linux/log2.h>
 #include <linux/math64.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
@@ -403,8 +403,8 @@ static irqreturn_t adc5_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int adc5_of_xlate(struct iio_dev *indio_dev,
-				const struct of_phandle_args *iiospec)
+static int adc5_fwnode_xlate(struct iio_dev *indio_dev,
+			     const struct fwnode_reference_args *iiospec)
 {
 	struct adc5_chip *adc = iio_priv(indio_dev);
 	int i;
@@ -416,8 +416,8 @@ static int adc5_of_xlate(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
-static int adc7_of_xlate(struct iio_dev *indio_dev,
-				const struct of_phandle_args *iiospec)
+static int adc7_fwnode_xlate(struct iio_dev *indio_dev,
+			     const struct fwnode_reference_args *iiospec)
 {
 	struct adc5_chip *adc = iio_priv(indio_dev);
 	int i, v_channel;
@@ -481,12 +481,12 @@ static int adc7_read_raw(struct iio_dev *indio_dev,
 
 static const struct iio_info adc5_info = {
 	.read_raw = adc5_read_raw,
-	.of_xlate = adc5_of_xlate,
+	.fwnode_xlate = adc5_fwnode_xlate,
 };
 
 static const struct iio_info adc7_info = {
 	.read_raw = adc7_read_raw,
-	.of_xlate = adc7_of_xlate,
+	.fwnode_xlate = adc7_fwnode_xlate,
 };
 
 struct adc5_channels {
@@ -611,18 +611,18 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
 };
 
-static int adc5_get_dt_channel_data(struct adc5_chip *adc,
+static int adc5_get_fw_channel_data(struct adc5_chip *adc,
 				    struct adc5_channel_prop *prop,
-				    struct device_node *node,
+				    struct fwnode_handle *fwnode,
 				    const struct adc5_data *data)
 {
-	const char *name = node->name, *channel_name;
+	const char *name = fwnode_get_name(fwnode), *channel_name;
 	u32 chan, value, varr[2];
 	u32 sid = 0;
 	int ret;
 	struct device *dev = adc->dev;
 
-	ret = of_property_read_u32(node, "reg", &chan);
+	ret = fwnode_property_read_u32(fwnode, "reg", &chan);
 	if (ret) {
 		dev_err(dev, "invalid channel number %s\n", name);
 		return ret;
@@ -647,15 +647,13 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 	prop->channel = chan;
 	prop->sid = sid;
 
-	channel_name = of_get_property(node,
-				"label", NULL) ? : node->name;
-	if (!channel_name) {
-		dev_err(dev, "Invalid channel name\n");
-		return -EINVAL;
-	}
+	ret = fwnode_property_read_string(fwnode, "label", &channel_name);
+	if (ret)
+		channel_name = name;
+
 	prop->datasheet_name = channel_name;
 
-	ret = of_property_read_u32(node, "qcom,decimation", &value);
+	ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value);
 	if (!ret) {
 		ret = qcom_adc5_decimation_from_dt(value, data->decimation);
 		if (ret < 0) {
@@ -668,7 +666,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 		prop->decimation = ADC5_DECIMATION_DEFAULT;
 	}
 
-	ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+	ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2);
 	if (!ret) {
 		ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]);
 		if (ret < 0) {
@@ -682,7 +680,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 			adc->data->adc_chans[prop->channel].prescale_index;
 	}
 
-	ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);
+	ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value);
 	if (!ret) {
 		u8 dig_version[2];
 
@@ -713,7 +711,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 		prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
 	}
 
-	ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+	ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value);
 	if (!ret) {
 		ret = qcom_adc5_avg_samples_from_dt(value);
 		if (ret < 0) {
@@ -726,7 +724,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 		prop->avg_samples = VADC_DEF_AVG_SAMPLES;
 	}
 
-	if (of_property_read_bool(node, "qcom,ratiometric"))
+	if (fwnode_property_read_bool(fwnode, "qcom,ratiometric"))
 		prop->cal_method = ADC5_RATIOMETRIC_CAL;
 	else
 		prop->cal_method = ADC5_ABSOLUTE_CAL;
@@ -801,16 +799,16 @@ static const struct of_device_id adc5_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, adc5_match_table);
 
-static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
+static int adc5_get_fw_data(struct adc5_chip *adc)
 {
 	const struct adc5_channels *adc_chan;
 	struct iio_chan_spec *iio_chan;
 	struct adc5_channel_prop prop, *chan_props;
-	struct device_node *child;
+	struct fwnode_handle *child;
 	unsigned int index = 0;
 	int ret;
 
-	adc->nchannels = of_get_available_child_count(node);
+	adc->nchannels = device_get_child_node_count(adc->dev);
 	if (!adc->nchannels)
 		return -EINVAL;
 
@@ -826,14 +824,14 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
 
 	chan_props = adc->chan_props;
 	iio_chan = adc->iio_chans;
-	adc->data = of_device_get_match_data(adc->dev);
+	adc->data = device_get_match_data(adc->dev);
 	if (!adc->data)
 		adc->data = &adc5_data_pmic;
 
-	for_each_available_child_of_node(node, child) {
-		ret = adc5_get_dt_channel_data(adc, &prop, child, adc->data);
+	device_for_each_child_node(adc->dev, child) {
+		ret = adc5_get_fw_channel_data(adc, &prop, child, adc->data);
 		if (ret) {
-			of_node_put(child);
+			fwnode_handle_put(child);
 			return ret;
 		}
 
@@ -858,7 +856,6 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
 
 static int adc5_probe(struct platform_device *pdev)
 {
-	struct device_node *node = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	struct iio_dev *indio_dev;
 	struct adc5_chip *adc;
@@ -870,7 +867,7 @@ static int adc5_probe(struct platform_device *pdev)
 	if (!regmap)
 		return -ENODEV;
 
-	ret = of_property_read_u32(node, "reg", &reg);
+	ret = device_property_read_u32(dev, "reg", &reg);
 	if (ret < 0)
 		return ret;
 
@@ -886,7 +883,7 @@ static int adc5_probe(struct platform_device *pdev)
 	init_completion(&adc->complete);
 	mutex_init(&adc->lock);
 
-	ret = adc5_get_dt_data(adc, node);
+	ret = adc5_get_fw_data(adc);
 	if (ret) {
 		dev_err(dev, "adc get dt data failed\n");
 		return ret;
-- 
2.37.0


  parent reply	other threads:[~2022-07-11 12:40 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-11 12:38 [PATCH v2 00/15] make iio inkern interface firmware agnostic Nuno Sá
2022-07-11 12:38 ` [PATCH v2 01/15] iio: inkern: only release the device node when done with it Nuno Sá
2022-07-11 13:09   ` Andy Shevchenko
2022-07-11 12:38 ` [PATCH v2 02/15] iio: inkern: fix return value in devm_of_iio_channel_get_by_name() Nuno Sá
2022-07-11 12:38 ` [PATCH v2 03/15] iio: inkern: only return error codes in iio_channel_get_*() APIs Nuno Sá
2022-07-11 13:29   ` Andy Shevchenko
2022-07-11 14:06     ` Nuno Sá
2022-07-11 12:38 ` [PATCH v2 04/15] iio: inkern: split of_iio_channel_get_by_name() Nuno Sá
2022-07-11 12:38 ` [PATCH v2 05/15] iio: inkern: move to fwnode properties Nuno Sá
2022-07-11 12:38 ` [PATCH v2 06/15] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API Nuno Sá
2022-07-11 12:38 ` [PATCH v2 07/15] iio: adc: ingenic-adc: convert to IIO fwnode interface Nuno Sá
2022-07-11 12:38 ` [PATCH v2 08/15] iio: adc: ab8500-gpadc: convert to device properties Nuno Sá
2022-07-11 12:38 ` [PATCH v2 09/15] iio: adc: at91-sama5d2_adc: " Nuno Sá
2022-07-11 12:38 ` [PATCH v2 10/15] iio: adc: qcom-pm8xxx-xoadc: " Nuno Sá
2022-07-11 12:38 ` [PATCH v2 11/15] iio: adc: qcom-spmi-vadc: " Nuno Sá
2022-07-11 12:38 ` Nuno Sá [this message]
2022-07-11 12:38 ` [PATCH v2 13/15] iio: adc: stm32-adc: " Nuno Sá
2022-07-11 14:04   ` Fabrice Gasnier
2022-07-12 10:33     ` Nuno Sá
2022-07-13 15:48       ` Fabrice Gasnier
2022-07-15 11:22         ` Nuno Sá
2022-07-11 12:38 ` [PATCH v2 14/15] iio: inkern: remove OF dependencies Nuno Sá
2022-07-11 12:38 ` [PATCH v2 15/15] iio: inkern: fix coding style warnings Nuno Sá
2022-07-11 13:15   ` Andy Shevchenko
2022-07-11 13:28     ` Biju Das
2022-07-11 13:32       ` Andy Shevchenko
2022-07-11 13:37         ` Biju Das
2022-07-11 14:05     ` Nuno Sá
2022-07-11 13:22 ` [PATCH v2 00/15] make iio inkern interface firmware agnostic Andy Shevchenko
2022-07-11 14:04   ` Nuno Sá

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220711123835.811358-13-nuno.sa@analog.com \
    --to=nuno.sa@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=agross@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=amitk@kernel.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=arnd@arndb.de \
    --cc=avifishman70@gmail.com \
    --cc=benjaminfair@google.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=bleung@chromium.org \
    --cc=cai.huoqing@linux.dev \
    --cc=cbranchereau@gmail.com \
    --cc=chrome-platform@lists.linux.dev \
    --cc=claudiu.beznea@microchip.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=eugen.hristev@microchip.com \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=festevam@gmail.com \
    --cc=groeck@chromium.org \
    --cc=gwendal@chromium.org \
    --cc=haibo.chen@nxp.com \
    --cc=jic23@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=lorenzo@kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=olivier.moysan@foss.st.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=paul@crapouillou.net \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=quic_jprakash@quicinc.com \
    --cc=rafael@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=sravanhome@gmail.com \
    --cc=tali.perry1@gmail.com \
    --cc=thara.gopinath@linaro.org \
    --cc=tmaimon77@gmail.com \
    --cc=venture@google.com \
    --cc=yuenn@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).