linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
To: paul@crapouillou.net, lgirdwood@gmail.com, broonie@kernel.org,
	perex@perex.cz, tiwai@suse.com
Cc: zhouyu@wanyeetech.com, linux-mips@vger.kernel.org,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 1/9] ASoC: jz4740-i2s: Handle independent FIFO flush bits
Date: Sun, 23 Oct 2022 15:33:20 +0100	[thread overview]
Message-ID: <20221023143328.160866-2-aidanmacdonald.0x0@gmail.com> (raw)
In-Reply-To: <20221023143328.160866-1-aidanmacdonald.0x0@gmail.com>

On the JZ4740, there is a single bit that flushes (empties) both
the transmit and receive FIFO. Later SoCs have independent flush
bits for each FIFO.

Independent FIFOs can be flushed before the snd_soc_dai_active()
check because it won't disturb other active streams. This ensures
that the FIFO we're about to use is always flushed before starting
up. With shared FIFOs we can't do that because if another substream
is active, flushing its FIFO would cause underrun errors.

This also fixes a bug: since we were only setting the JZ4740's
flush bit, which corresponds to the TX FIFO flush bit on other
SoCs, other SoCs were not having their RX FIFO flushed at all.

Fixes: 967beb2e8777 ("ASoC: jz4740: Add jz4780 support")
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
v5 -> v6: Cc'd stable.

 sound/soc/jz4740/jz4740-i2s.c | 39 ++++++++++++++++++++++++++++++-----
 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
index c4c1e89b47c1..83cb81999c6f 100644
--- a/sound/soc/jz4740/jz4740-i2s.c
+++ b/sound/soc/jz4740/jz4740-i2s.c
@@ -55,7 +55,8 @@
 #define JZ_AIC_CTRL_MONO_TO_STEREO BIT(11)
 #define JZ_AIC_CTRL_SWITCH_ENDIANNESS BIT(10)
 #define JZ_AIC_CTRL_SIGNED_TO_UNSIGNED BIT(9)
-#define JZ_AIC_CTRL_FLUSH		BIT(8)
+#define JZ_AIC_CTRL_TFLUSH		BIT(8)
+#define JZ_AIC_CTRL_RFLUSH		BIT(7)
 #define JZ_AIC_CTRL_ENABLE_ROR_INT BIT(6)
 #define JZ_AIC_CTRL_ENABLE_TUR_INT BIT(5)
 #define JZ_AIC_CTRL_ENABLE_RFS_INT BIT(4)
@@ -90,6 +91,8 @@ enum jz47xx_i2s_version {
 struct i2s_soc_info {
 	enum jz47xx_i2s_version version;
 	struct snd_soc_dai_driver *dai;
+
+	bool shared_fifo_flush;
 };
 
 struct jz4740_i2s {
@@ -116,19 +119,44 @@ static inline void jz4740_i2s_write(const struct jz4740_i2s *i2s,
 	writel(value, i2s->base + reg);
 }
 
+static inline void jz4740_i2s_set_bits(const struct jz4740_i2s *i2s,
+	unsigned int reg, uint32_t bits)
+{
+	uint32_t value = jz4740_i2s_read(i2s, reg);
+	value |= bits;
+	jz4740_i2s_write(i2s, reg, value);
+}
+
 static int jz4740_i2s_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *dai)
 {
 	struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-	uint32_t conf, ctrl;
+	uint32_t conf;
 	int ret;
 
+	/*
+	 * When we can flush FIFOs independently, only flush the FIFO
+	 * that is starting up. We can do this when the DAI is active
+	 * because it does not disturb other active substreams.
+	 */
+	if (!i2s->soc_info->shared_fifo_flush) {
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			jz4740_i2s_set_bits(i2s, JZ_REG_AIC_CTRL, JZ_AIC_CTRL_TFLUSH);
+		else
+			jz4740_i2s_set_bits(i2s, JZ_REG_AIC_CTRL, JZ_AIC_CTRL_RFLUSH);
+	}
+
 	if (snd_soc_dai_active(dai))
 		return 0;
 
-	ctrl = jz4740_i2s_read(i2s, JZ_REG_AIC_CTRL);
-	ctrl |= JZ_AIC_CTRL_FLUSH;
-	jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl);
+	/*
+	 * When there is a shared flush bit for both FIFOs, the TFLUSH
+	 * bit flushes both FIFOs. Flushing while the DAI is active would
+	 * cause FIFO underruns in other active substreams so we have to
+	 * guard this behind the snd_soc_dai_active() check.
+	 */
+	if (i2s->soc_info->shared_fifo_flush)
+		jz4740_i2s_set_bits(i2s, JZ_REG_AIC_CTRL, JZ_AIC_CTRL_TFLUSH);
 
 	ret = clk_prepare_enable(i2s->clk_i2s);
 	if (ret)
@@ -443,6 +471,7 @@ static struct snd_soc_dai_driver jz4740_i2s_dai = {
 static const struct i2s_soc_info jz4740_i2s_soc_info = {
 	.version = JZ_I2S_JZ4740,
 	.dai = &jz4740_i2s_dai,
+	.shared_fifo_flush = true,
 };
 
 static const struct i2s_soc_info jz4760_i2s_soc_info = {
-- 
2.38.1


  reply	other threads:[~2022-10-23 14:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-23 14:33 [PATCH v6 0/9] ASoC: cleanups and improvements for jz4740-i2s Aidan MacDonald
2022-10-23 14:33 ` Aidan MacDonald [this message]
2022-10-23 14:33 ` [PATCH v6 2/9] ASoC: jz4740-i2s: Convert to regmap API Aidan MacDonald
2022-10-23 14:33 ` [PATCH v6 3/9] ASoC: jz4740-i2s: Simplify using regmap fields Aidan MacDonald
2022-10-23 14:33 ` [PATCH v6 4/9] ASoC: jz4740-i2s: Use FIELD_PREP() macros in hw_params callback Aidan MacDonald
2022-10-23 14:33 ` [PATCH v6 5/9] ASoC: jz4740-i2s: Align macro values and sort includes Aidan MacDonald
2022-10-23 14:33 ` [PATCH v6 6/9] ASoC: jz4740-i2s: Support S20_LE and S24_LE sample formats Aidan MacDonald
2022-10-23 14:33 ` [PATCH v6 7/9] ASoC: jz4740-i2s: Support continuous sample rate Aidan MacDonald
2022-10-23 14:33 ` [PATCH v6 8/9] ASoC: jz4740-i2s: Move component functions near the component driver Aidan MacDonald
2022-10-23 14:33 ` [PATCH v6 9/9] ASoC: jz4740-i2s: Refactor DAI probe/remove ops as component ops Aidan MacDonald
2022-10-26 19:04 ` [PATCH v6 0/9] ASoC: cleanups and improvements for jz4740-i2s Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221023143328.160866-2-aidanmacdonald.0x0@gmail.com \
    --to=aidanmacdonald.0x0@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=paul@crapouillou.net \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=zhouyu@wanyeetech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).