[PATCH 2/2] irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts

[Florian Fainelli <f.fainelli@gmail.com>]

When support for the interrupt controller was added with a5042de2688d,
we forgot to update the flags to be set to contain IRQ_LEVEL. While the
flow handler is correct, the output from /proc/interrupts does not show
such interrupts as being level triggered when they are, correct that.

Fixes: a5042de2688d ("irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm7120-l2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c
index bb6609cebdbc..1e9dab6e0d86 100644
--- a/drivers/irqchip/irq-bcm7120-l2.c
+++ b/drivers/irqchip/irq-bcm7120-l2.c
@@ -279,7 +279,8 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn,
 		flags |= IRQ_GC_BE_IO;
 
 	ret = irq_alloc_domain_generic_chips(data->domain, IRQS_PER_WORD, 1,
-				dn->full_name, handle_level_irq, clr, 0, flags);
+				dn->full_name, handle_level_irq, clr,
+				IRQ_LEVEL, flags);
 	if (ret) {
 		pr_err("failed to allocate generic irq chip\n");
 		goto out_free_domain;
-- 
2.34.1