[PATCH AUTOSEL 6.1 24/33] MIPS: unhide PATA_PLATFORM

[PATCH AUTOSEL 6.1 24/33] MIPS: unhide PATA_PLATFORM

[Sasha Levin]

From: Manuel Lauss <manuel.lauss@gmail.com>

[ Upstream commit 75b18aac6fa39a1720677970cfcb52ecea1eb44c ]

Alchemy DB1200/DB1300 boards can use the pata_platform driver.
Unhide the config entry in all of MIPS.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b26b77673c2cc..2f5835e300a8f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -82,6 +82,7 @@ config MIPS
 	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
+	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-- 
2.39.2

[PATCH AUTOSEL 6.1 25/33] MIPS: Restore Au1300 support

[Sasha Levin]

From: Manuel Lauss <manuel.lauss@gmail.com>

[ Upstream commit f2041708dee30a3425f680265c337acd28293782 ]

The Au1300, at least the one I have to test, uses the NetLogic vendor
ID, but commit 95b8a5e0111a ("MIPS: Remove NETLOGIC support") also
dropped Au1300 detection.  Restore Au1300 detection.

Tested on DB1300 with Au1380 chip.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/cpu-probe.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 7ddf07f255f32..6f5d825958778 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1502,6 +1502,10 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
 			break;
 		}
 		break;
+	case PRID_IMP_NETLOGIC_AU13XX:
+		c->cputype = CPU_ALCHEMY;
+		__cpu_name[cpu] = "Au1300";
+		break;
 	}
 }
 
@@ -1861,6 +1865,7 @@ void cpu_probe(void)
 		cpu_probe_mips(c, cpu);
 		break;
 	case PRID_COMP_ALCHEMY:
+	case PRID_COMP_NETLOGIC:
 		cpu_probe_alchemy(c, cpu);
 		break;
 	case PRID_COMP_SIBYTE:
-- 
2.39.2

[PATCH AUTOSEL 6.1 26/33] MIPS: Alchemy: fix dbdma2

[Sasha Levin]

From: Manuel Lauss <manuel.lauss@gmail.com>

[ Upstream commit 2d645604f69f3a772d58ead702f9a8e84ab2b342 ]

Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code:

- skip cache invalidation if chip has working coherency circuitry.
- invalidate KSEG0-portion of the (physical) data address.
- force the dma channel doorbell write out to bus immediately with
  a sync.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/alchemy/common/dbdma.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 5ab0430004092..6a3c890f7bbfe 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -30,6 +30,7 @@
  *
  */
 
+#include <linux/dma-map-ops.h> /* for dma_default_coherent */
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -623,17 +624,18 @@ u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
 
 	/*
-	 * There is an errata on the Au1200/Au1550 parts that could result
-	 * in "stale" data being DMA'ed. It has to do with the snoop logic on
-	 * the cache eviction buffer.  DMA_NONCOHERENT is on by default for
-	 * these parts. If it is fixed in the future, these dma_cache_inv will
-	 * just be nothing more than empty macros. See io.h.
+	 * There is an erratum on certain Au1200/Au1550 revisions that could
+	 * result in "stale" data being DMA'ed. It has to do with the snoop
+	 * logic on the cache eviction buffer.  dma_default_coherent is set
+	 * to false on these parts.
 	 */
-	dma_cache_wback_inv((unsigned long)buf, nbytes);
+	if (!dma_default_coherent)
+		dma_cache_wback_inv(KSEG0ADDR(buf), nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	wmb(); /* drain writebuffer */
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
+	wmb(); /* force doorbell write out to dma engine */
 
 	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
@@ -685,17 +687,18 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 			  dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
 #endif
 	/*
-	 * There is an errata on the Au1200/Au1550 parts that could result in
-	 * "stale" data being DMA'ed. It has to do with the snoop logic on the
-	 * cache eviction buffer.  DMA_NONCOHERENT is on by default for these
-	 * parts. If it is fixed in the future, these dma_cache_inv will just
-	 * be nothing more than empty macros. See io.h.
+	 * There is an erratum on certain Au1200/Au1550 revisions that could
+	 * result in "stale" data being DMA'ed. It has to do with the snoop
+	 * logic on the cache eviction buffer.  dma_default_coherent is set
+	 * to false on these parts.
 	 */
-	dma_cache_inv((unsigned long)buf, nbytes);
+	if (!dma_default_coherent)
+		dma_cache_inv(KSEG0ADDR(buf), nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	wmb(); /* drain writebuffer */
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
+	wmb(); /* force doorbell write out to dma engine */
 
 	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
-- 
2.39.2

[PATCH AUTOSEL 6.1 27/33] mips: Move initrd_start check after initrd address sanitisation.

[Sasha Levin]

From: Liviu Dudau <liviu@dudau.co.uk>

[ Upstream commit 4897a898a216058dec55e5e5902534e6e224fcdf ]

PAGE_OFFSET is technically a virtual address so when checking the value of
initrd_start against it we should make sure that it has been sanitised from
the values passed by the bootloader. Without this change, even with a bootloader
that passes correct addresses for an initrd, we are failing to load it on MT7621
boards, for example.

Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/setup.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index f1c88f8a1dc51..81dbb4ef52317 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -158,10 +158,6 @@ static unsigned long __init init_initrd(void)
 		pr_err("initrd start must be page aligned\n");
 		goto disable;
 	}
-	if (initrd_start < PAGE_OFFSET) {
-		pr_err("initrd start < PAGE_OFFSET\n");
-		goto disable;
-	}
 
 	/*
 	 * Sanitize initrd addresses. For example firmware
@@ -174,6 +170,11 @@ static unsigned long __init init_initrd(void)
 	initrd_end = (unsigned long)__va(end);
 	initrd_start = (unsigned long)__va(__pa(initrd_start));
 
+	if (initrd_start < PAGE_OFFSET) {
+		pr_err("initrd start < PAGE_OFFSET\n");
+		goto disable;
+	}
+
 	ROOT_DEV = Root_RAM0;
 	return PFN_UP(end);
 disable:
-- 
2.39.2