From: Keguang Zhang <keguang.zhang@gmail.com>
To: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Keguang Zhang <keguang.zhang@gmail.com>
Subject: [PATCH 1/2] MIPS: loongson32: Remove regs-clk.h
Date: Fri, 7 Jul 2023 19:11:50 +0800 [thread overview]
Message-ID: <20230707111151.461373-2-keguang.zhang@gmail.com> (raw)
In-Reply-To: <20230707111151.461373-1-keguang.zhang@gmail.com>
Since commit c46496119ed0 ("clk: loongson1: Remove
the outdated driver"), no one is using regs-clk.h.
Therefore, remove this obsolete header file.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
.../include/asm/mach-loongson32/loongson1.h | 1 -
.../include/asm/mach-loongson32/regs-clk.h | 81 -------------------
2 files changed, 82 deletions(-)
delete mode 100644 arch/mips/include/asm/mach-loongson32/regs-clk.h
diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
index 7971272345d3..bc27fcee3176 100644
--- a/arch/mips/include/asm/mach-loongson32/loongson1.h
+++ b/arch/mips/include/asm/mach-loongson32/loongson1.h
@@ -45,7 +45,6 @@
#define LS1X_NAND_BASE 0x1fe78000
#define LS1X_CLK_BASE 0x1fe78030
-#include <regs-clk.h>
#include <regs-mux.h>
#include <regs-rtc.h>
diff --git a/arch/mips/include/asm/mach-loongson32/regs-clk.h b/arch/mips/include/asm/mach-loongson32/regs-clk.h
deleted file mode 100644
index 98136fa8bee1..000000000000
--- a/arch/mips/include/asm/mach-loongson32/regs-clk.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 Clock Register Definitions.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_REGS_CLK_H
-#define __ASM_MACH_LOONGSON32_REGS_CLK_H
-
-#define LS1X_CLK_REG(x) \
- ((void __iomem *)KSEG1ADDR(LS1X_CLK_BASE + (x)))
-
-#define LS1X_CLK_PLL_FREQ LS1X_CLK_REG(0x0)
-#define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4)
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-/* Clock PLL Divisor Register Bits */
-#define DIV_DC_EN BIT(31)
-#define DIV_DC_RST BIT(30)
-#define DIV_CPU_EN BIT(25)
-#define DIV_CPU_RST BIT(24)
-#define DIV_DDR_EN BIT(19)
-#define DIV_DDR_RST BIT(18)
-#define RST_DC_EN BIT(5)
-#define RST_DC BIT(4)
-#define RST_DDR_EN BIT(3)
-#define RST_DDR BIT(2)
-#define RST_CPU_EN BIT(1)
-#define RST_CPU BIT(0)
-
-#define DIV_DC_SHIFT 26
-#define DIV_CPU_SHIFT 20
-#define DIV_DDR_SHIFT 14
-
-#define DIV_DC_WIDTH 4
-#define DIV_CPU_WIDTH 4
-#define DIV_DDR_WIDTH 4
-
-#define BYPASS_DC_SHIFT 12
-#define BYPASS_DDR_SHIFT 10
-#define BYPASS_CPU_SHIFT 8
-
-#define BYPASS_DC_WIDTH 1
-#define BYPASS_DDR_WIDTH 1
-#define BYPASS_CPU_WIDTH 1
-
-#elif defined(CONFIG_LOONGSON1_LS1C)
-/* PLL/SDRAM Frequency configuration register Bits */
-#define PLL_VALID BIT(31)
-#define FRAC_N GENMASK(23, 16)
-#define RST_TIME GENMASK(3, 2)
-#define SDRAM_DIV GENMASK(1, 0)
-
-/* CPU/CAMERA/DC Frequency configuration register Bits */
-#define DIV_DC_EN BIT(31)
-#define DIV_DC GENMASK(30, 24)
-#define DIV_CAM_EN BIT(23)
-#define DIV_CAM GENMASK(22, 16)
-#define DIV_CPU_EN BIT(15)
-#define DIV_CPU GENMASK(14, 8)
-#define DIV_DC_SEL_EN BIT(5)
-#define DIV_DC_SEL BIT(4)
-#define DIV_CAM_SEL_EN BIT(3)
-#define DIV_CAM_SEL BIT(2)
-#define DIV_CPU_SEL_EN BIT(1)
-#define DIV_CPU_SEL BIT(0)
-
-#define DIV_DC_SHIFT 24
-#define DIV_CAM_SHIFT 16
-#define DIV_CPU_SHIFT 8
-#define DIV_DDR_SHIFT 0
-
-#define DIV_DC_WIDTH 7
-#define DIV_CAM_WIDTH 7
-#define DIV_CPU_WIDTH 7
-#define DIV_DDR_WIDTH 2
-
-#endif
-
-#endif /* __ASM_MACH_LOONGSON32_REGS_CLK_H */
--
2.39.2
next prev parent reply other threads:[~2023-07-07 11:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-07 11:11 [PATCH 0/2] MIPS: loongson32: Remove obsolete header files Keguang Zhang
2023-07-07 11:11 ` Keguang Zhang [this message]
2023-07-07 11:11 ` [PATCH 2/2] MIPS: loongson32: Remove regs-rtc.h Keguang Zhang
2023-07-25 8:47 ` Thomas Bogendoerfer
2023-07-25 10:15 ` Keguang Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230707111151.461373-2-keguang.zhang@gmail.com \
--to=keguang.zhang@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).