[PATCH] mips: dts: ralink: mt7621: define each reset as an item

["Arınç ÜNAL" <arinc.unal@arinc9.com>]

Each item of the resets property should define a reset. Split the item with
two resets on the ethernet node into two separate items.

Sort the items of the clocks property to the same line as a trivial change.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 arch/mips/boot/dts/ralink/mt7621.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 7caed0d14f11..35a10258f235 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -300,14 +300,13 @@ ethernet: ethernet@1e100000 {
 		compatible = "mediatek,mt7621-eth";
 		reg = <0x1e100000 0x10000>;
 
-		clocks = <&sysc MT7621_CLK_FE>,
-			 <&sysc MT7621_CLK_ETH>;
+		clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>;
 		clock-names = "fe", "ethif";
 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		resets = <&sysc MT7621_RST_FE &sysc MT7621_RST_ETH>;
+		resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>;
 		reset-names = "fe", "eth";
 
 		interrupt-parent = <&gic>;
-- 
2.39.2