From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org,
"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>
Subject: [PATCH 02/11] dt-bindings: clock: mobileye,eyeq5-clk: add EyeQ6L and EyeQ6H
Date: Wed, 10 Apr 2024 19:12:31 +0200 [thread overview]
Message-ID: <20240410-mbly-olb-v1-2-335e496d7be3@bootlin.com> (raw)
In-Reply-To: <20240410-mbly-olb-v1-0-335e496d7be3@bootlin.com>
Add bindings describing EyeQ6L and EyeQ6H clock controllers.
Add constants to index clocks.
Bindings are conditional for two reasons:
- Some compatibles expose a single clock; they do not take clock cells.
- All compatibles take a PLLs resource, not all take others (aimed at
divider clocks). Those that only take a resource for PLLs do not
require named resources.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
.../bindings/clock/mobileye,eyeq5-clk.yaml | 103 ++++++++++++++++++---
MAINTAINERS | 2 +
include/dt-bindings/clock/mobileye,eyeq5-clk.h | 21 +++++
3 files changed, 113 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml b/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml
index 2d4f2cde1e58..a1651fcce258 100644
--- a/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml
@@ -4,12 +4,13 @@
$id: http://devicetree.org/schemas/clock/mobileye,eyeq5-clk.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Mobileye EyeQ5 clock controller
+title: Mobileye EyeQ clock controller
description:
- The EyeQ5 clock controller handles 10 read-only PLLs derived from the main
- crystal clock. It also exposes one divider clock, a child of one of the PLLs.
- Its registers live in a shared region called OLB.
+ EyeQ clock controllers expose read-only PLLs derived from main crystal clock.
+ Some also expose divider clocks, children of specific PLLs. Its registers
+ live in a shared region called OLB. EyeQ5 and EyeQ6L have a single OLB
+ instance while EyeQ6H have seven, leading to seven clock controllers.
maintainers:
- Grégory Clement <gregory.clement@bootlin.com>
@@ -18,18 +19,23 @@ maintainers:
properties:
compatible:
- const: mobileye,eyeq5-clk
+ enum:
+ - mobileye,eyeq5-clk
+ - mobileye,eyeq6l-clk
+ - mobileye,eyeq6h-central-clk
+ - mobileye,eyeq6h-west-clk
+ - mobileye,eyeq6h-east-clk
+ - mobileye,eyeq6h-south-clk
+ - mobileye,eyeq6h-ddr0-clk
+ - mobileye,eyeq6h-ddr1-clk
+ - mobileye,eyeq6h-acc-clk
- reg:
- maxItems: 2
+ reg: true
- reg-names:
- items:
- - const: plls
- - const: ospi
+ reg-names: true
"#clock-cells":
- const: 1
+ enum: [0, 1]
clocks:
maxItems: 1
@@ -43,9 +49,80 @@ properties:
required:
- compatible
- reg
- - reg-names
- "#clock-cells"
- clocks
- clock-names
+allOf:
+ # "mobileye,eyeq5-clk" provides:
+ # - PLLs and,
+ # - One divider clock related to ospi.
+ - if:
+ properties:
+ compatible:
+ const: mobileye,eyeq5-clk
+ then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+ reg-names:
+ minItems: 2
+ maxItems: 2
+ items:
+ enum: [ plls, ospi ]
+ required:
+ - reg-names
+
+ # "mobileye,eyeq6h-south-clk" provides:
+ # - PLLs and,
+ # - Four divider clocks related to emmc, ospi and tsu.
+ - if:
+ properties:
+ compatible:
+ const: mobileye,eyeq6h-south-clk
+ then:
+ properties:
+ reg:
+ minItems: 4
+ maxItems: 4
+ reg-names:
+ minItems: 4
+ maxItems: 4
+ items:
+ enum: [ plls, emmc, ospi, tsu ]
+ required:
+ - reg-names
+
+ # Other compatibles only provide PLLs. Do not ask for named resources.
+ - if:
+ not:
+ required:
+ - reg-names
+ then:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 1
+ reg-names: false
+
+ # Some compatibles provide a single clock; they do not take a clock cell.
+ - if:
+ properties:
+ compatible:
+ enum:
+ - mobileye,eyeq6h-central-clk
+ - mobileye,eyeq6h-west-clk
+ - mobileye,eyeq6h-east-clk
+ - mobileye,eyeq6h-ddr0-clk
+ - mobileye,eyeq6h-ddr1-clk
+ then:
+ properties:
+ "#clock-cells":
+ const: 0
+ else:
+ properties:
+ "#clock-cells":
+ const: 1
+
additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index 30dfbee84007..f5a488331b38 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14925,11 +14925,13 @@ M: Gregory CLEMENT <gregory.clement@bootlin.com>
M: Théo Lebrun <theo.lebrun@bootlin.com>
L: linux-mips@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml
F: Documentation/devicetree/bindings/mips/mobileye.yaml
F: Documentation/devicetree/bindings/soc/mobileye/
F: arch/mips/boot/dts/mobileye/
F: arch/mips/configs/eyeq5_defconfig
F: arch/mips/mobileye/board-epm5.its.S
+F: include/dt-bindings/clock/mobileye,eyeq5-clk.h
MODULE SUPPORT
M: Luis Chamberlain <mcgrof@kernel.org>
diff --git a/include/dt-bindings/clock/mobileye,eyeq5-clk.h b/include/dt-bindings/clock/mobileye,eyeq5-clk.h
index 26d8930335e4..b433c1772c28 100644
--- a/include/dt-bindings/clock/mobileye,eyeq5-clk.h
+++ b/include/dt-bindings/clock/mobileye,eyeq5-clk.h
@@ -19,4 +19,25 @@
#define EQ5C_DIV_OSPI 10
+#define EQ6LC_PLL_DDR 0
+#define EQ6LC_PLL_CPU 1
+#define EQ6LC_PLL_PER 2
+#define EQ6LC_PLL_VDI 3
+
+#define EQ6HC_SOUTH_PLL_VDI 0
+#define EQ6HC_SOUTH_PLL_PCIE 1
+#define EQ6HC_SOUTH_PLL_PER 2
+#define EQ6HC_SOUTH_PLL_ISP 3
+
+#define EQ6HC_SOUTH_DIV_EMMC 4
+#define EQ6HC_SOUTH_DIV_OSPI_REF 5
+#define EQ6HC_SOUTH_DIV_OSPI_SYS 6
+#define EQ6HC_SOUTH_DIV_TSU 7
+
+#define EQ6HC_ACC_PLL_XNN 0
+#define EQ6HC_ACC_PLL_VMP 1
+#define EQ6HC_ACC_PLL_PMA 2
+#define EQ6HC_ACC_PLL_MPC 3
+#define EQ6HC_ACC_PLL_NOC 4
+
#endif
--
2.44.0
next prev parent reply other threads:[~2024-04-10 17:12 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-10 17:12 [PATCH 00/11] Add Mobileye EyeQ system controller support (clk, reset, pinctrl) Théo Lebrun
2024-04-10 17:12 ` [PATCH 01/11] dt-bindings: soc: mobileye: add EyeQ5 OLB system controller Théo Lebrun
2024-04-10 18:52 ` Rob Herring
2024-04-11 9:19 ` Théo Lebrun
2024-04-11 3:29 ` Stephen Boyd
2024-04-10 17:12 ` Théo Lebrun [this message]
2024-04-11 6:14 ` [PATCH 02/11] dt-bindings: clock: mobileye,eyeq5-clk: add EyeQ6L and EyeQ6H Krzysztof Kozlowski
2024-04-11 13:49 ` Théo Lebrun
2024-04-11 15:02 ` Krzysztof Kozlowski
2024-04-10 17:12 ` [PATCH 03/11] dt-bindings: reset: mobileye,eyeq5-reset: " Théo Lebrun
2024-04-11 6:14 ` Krzysztof Kozlowski
2024-04-11 14:04 ` Théo Lebrun
2024-04-11 15:05 ` Krzysztof Kozlowski
2024-04-10 17:12 ` [PATCH 04/11] clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag Théo Lebrun
2024-04-11 3:06 ` Stephen Boyd
2024-04-11 10:14 ` Théo Lebrun
2024-04-12 5:19 ` Stephen Boyd
2024-04-10 17:12 ` [PATCH 05/11] clk: eyeq: add driver Théo Lebrun
2024-04-11 3:22 ` Stephen Boyd
2024-04-11 10:46 ` Théo Lebrun
2024-04-12 5:46 ` Stephen Boyd
2024-04-17 10:18 ` Théo Lebrun
2024-04-10 17:12 ` [PATCH 06/11] reset: eyeq: add platform driver Théo Lebrun
2024-04-10 17:12 ` [PATCH 07/11] pinctrl: eyeq5: " Théo Lebrun
2024-04-10 17:12 ` [PATCH 08/11] MIPS: mobileye: eyeq5: add OLB syscon node Théo Lebrun
2024-04-11 6:15 ` Krzysztof Kozlowski
2024-04-11 14:34 ` Théo Lebrun
2024-04-11 15:07 ` Krzysztof Kozlowski
2024-04-17 7:53 ` Théo Lebrun
2024-04-10 17:12 ` [PATCH 09/11] MIPS: mobileye: eyeq5: use OLB clocks controller node Théo Lebrun
2024-04-10 17:12 ` [PATCH 10/11] MIPS: mobileye: eyeq5: add OLB reset " Théo Lebrun
2024-04-10 17:12 ` [PATCH 11/11] MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes Théo Lebrun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240410-mbly-olb-v1-2-335e496d7be3@bootlin.com \
--to=theo.lebrun@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=tawfik.bayouk@mobileye.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).