[PATCH v2 00/25] mm: introduce numa_memblks

[PATCH v2 00/25] mm: introduce numa_memblks

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Hi,

Following the discussion about handling of CXL fixed memory windows on
arm64 [1] I decided to bite the bullet and move numa_memblks from x86 to
the generic code so they will be available on arm64/riscv and maybe on
loongarch sometime later.

While it could be possible to use memblock to describe CXL memory windows,
it currently lacks notion of unpopulated memory ranges and numa_memblks
does implement this.

Another reason to make numa_memblks generic is that both arch_numa (arm64
and riscv) and loongarch use trimmed copy of x86 code although there is no
fundamental reason why the same code cannot be used on all these platforms.
Having numa_memblks in mm/ will make it's interaction with ACPI and FDT
more consistent and I believe will reduce maintenance burden.

And with generic numa_memblks it is (almost) straightforward to enable NUMA
emulation on arm64 and riscv.

The first 9 commits in this series are cleanups that are not strictly
related to numa_memblks.
Commits 10-16 slightly reorder code in x86 to allow extracting numa_memblks
and NUMA emulation to the generic code.
Commits 17-19 actually move the code from arch/x86/ to mm/ and commits 20-22
does some aftermath cleanups.
Commit 23 switches arch_numa to numa_memblks.
Commit 24 enables usage of phys_to_target_node() and
memory_add_physaddr_to_nid() with numa_memblks.
Commit 25 moves the description for numa=fake from x86 to admin-guide

[1] https://lore.kernel.org/all/20240529171236.32002-1-Jonathan.Cameron@huawei.com/

v1: https://lore.kernel.org/all/20240716111346.3676969-1-rppt@kernel.org
* add cleanup for arch_alloc_nodedata and HAVE_ARCH_NODEDATA_EXTENSION
* add patch that moves description of numa=fake kernel parameter from
  x86 to admin-guide
* reduce rounding up of node_data allocations from PAGE_SIZE to
  SMP_CACHE_BYTES
* restore single allocation attempt of numa_distance
* fix several comments
* added review tags

Mike Rapoport (Microsoft) (25):
  mm: move kernel/numa.c to mm/
  MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
  MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
  MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
  MIPS: loongson64: rename __node_data to node_data
  MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
  mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  arch, mm: move definition of node_data to generic code
  arch, mm: pull out allocation of NODE_DATA to generic code
  x86/numa: simplify numa_distance allocation
  x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  x86/numa: move FAKE_NODE_* defines to numa_emu
  x86/numa_emu: simplify allocation of phys_dist
  x86/numa_emu: split __apicid_to_node update to a helper function
  x86/numa_emu: use a helper function to get MAX_DMA32_PFN
  x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
  mm: introduce numa_memblks
  mm: move numa_distance and related code from x86 to numa_memblks
  mm: introduce numa_emulation
  mm: numa_memblks: introduce numa_memblks_init
  mm: numa_memblks: make several functions and variables static
  mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing
    meminfo
  arch_numa: switch over to numa_memblks
  mm: make range-to-target_node lookup facility a part of numa_memblks
  docs: move numa=fake description to kernel-parameters.txt

 .../admin-guide/kernel-parameters.txt         |  15 +
 .../arch/x86/x86_64/boot-options.rst          |  12 -
 arch/arm64/include/asm/Kbuild                 |   1 +
 arch/arm64/include/asm/mmzone.h               |  13 -
 arch/arm64/include/asm/topology.h             |   1 +
 arch/loongarch/include/asm/Kbuild             |   1 +
 arch/loongarch/include/asm/mmzone.h           |  16 -
 arch/loongarch/include/asm/topology.h         |   1 +
 arch/loongarch/kernel/numa.c                  |  21 -
 arch/mips/Kconfig                             |   5 -
 arch/mips/include/asm/mach-ip27/mmzone.h      |   1 -
 .../mips/include/asm/mach-loongson64/mmzone.h |   4 -
 arch/mips/loongson64/numa.c                   |  28 +-
 arch/mips/sgi-ip27/ip27-memory.c              |  12 +-
 arch/mips/sgi-ip27/ip27-smp.c                 |   2 +
 arch/powerpc/include/asm/mmzone.h             |   6 -
 arch/powerpc/mm/numa.c                        |  26 +-
 arch/riscv/include/asm/Kbuild                 |   1 +
 arch/riscv/include/asm/mmzone.h               |  13 -
 arch/riscv/include/asm/topology.h             |   4 +
 arch/s390/include/asm/Kbuild                  |   1 +
 arch/s390/include/asm/mmzone.h                |  17 -
 arch/s390/kernel/numa.c                       |   3 -
 arch/sh/include/asm/mmzone.h                  |   3 -
 arch/sh/mm/init.c                             |   7 +-
 arch/sh/mm/numa.c                             |   3 -
 arch/sparc/include/asm/mmzone.h               |   4 -
 arch/sparc/mm/init_64.c                       |  11 +-
 arch/x86/Kconfig                              |   9 +-
 arch/x86/include/asm/Kbuild                   |   1 +
 arch/x86/include/asm/mmzone.h                 |   6 -
 arch/x86/include/asm/mmzone_32.h              |  17 -
 arch/x86/include/asm/mmzone_64.h              |  18 -
 arch/x86/include/asm/numa.h                   |  26 +-
 arch/x86/include/asm/sparsemem.h              |   9 -
 arch/x86/mm/Makefile                          |   1 -
 arch/x86/mm/amdtopology.c                     |   1 +
 arch/x86/mm/numa.c                            | 618 +-----------------
 arch/x86/mm/numa_internal.h                   |  24 -
 drivers/acpi/numa/srat.c                      |   1 +
 drivers/base/Kconfig                          |   1 +
 drivers/base/arch_numa.c                      | 223 ++-----
 drivers/cxl/Kconfig                           |   2 +-
 drivers/dax/Kconfig                           |   2 +-
 drivers/of/of_numa.c                          |   1 +
 include/asm-generic/mmzone.h                  |   5 +
 include/asm-generic/numa.h                    |   6 +-
 include/linux/memory_hotplug.h                |  48 --
 include/linux/numa.h                          |   5 +
 include/linux/numa_memblks.h                  |  58 ++
 kernel/Makefile                               |   1 -
 kernel/numa.c                                 |  26 -
 mm/Kconfig                                    |  11 +
 mm/Makefile                                   |   3 +
 mm/mm_init.c                                  |   3 +-
 mm/numa.c                                     |  57 ++
 {arch/x86/mm => mm}/numa_emulation.c          |  42 +-
 mm/numa_memblks.c                             | 568 ++++++++++++++++
 58 files changed, 867 insertions(+), 1158 deletions(-)
 delete mode 100644 arch/arm64/include/asm/mmzone.h
 delete mode 100644 arch/loongarch/include/asm/mmzone.h
 delete mode 100644 arch/riscv/include/asm/mmzone.h
 delete mode 100644 arch/s390/include/asm/mmzone.h
 delete mode 100644 arch/x86/include/asm/mmzone.h
 delete mode 100644 arch/x86/include/asm/mmzone_32.h
 delete mode 100644 arch/x86/include/asm/mmzone_64.h
 create mode 100644 include/asm-generic/mmzone.h
 create mode 100644 include/linux/numa_memblks.h
 delete mode 100644 kernel/numa.c
 create mode 100644 mm/numa.c
 rename {arch/x86/mm => mm}/numa_emulation.c (94%)
 create mode 100644 mm/numa_memblks.c


base-commit: 22a40d14b572deb80c0648557f4bd502d7e83826
-- 
2.43.0

[PATCH v2 01/25] mm: move kernel/numa.c to mm/

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

The stub functions in kernel/numa.c belong to mm/ rather than to kernel/

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 kernel/Makefile       | 1 -
 mm/Makefile           | 1 +
 {kernel => mm}/numa.c | 0
 3 files changed, 1 insertion(+), 1 deletion(-)
 rename {kernel => mm}/numa.c (100%)

diff --git a/kernel/Makefile b/kernel/Makefile
index 3c13240dfc9f..87866b037fbe 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -116,7 +116,6 @@ obj-$(CONFIG_SHADOW_CALL_STACK) += scs.o
 obj-$(CONFIG_HAVE_STATIC_CALL) += static_call.o
 obj-$(CONFIG_HAVE_STATIC_CALL_INLINE) += static_call_inline.o
 obj-$(CONFIG_CFI_CLANG) += cfi.o
-obj-$(CONFIG_NUMA) += numa.o
 
 obj-$(CONFIG_PERF_EVENTS) += events/
 
diff --git a/mm/Makefile b/mm/Makefile
index 8fb85acda1b1..773b3b267438 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -139,3 +139,4 @@ obj-$(CONFIG_HAVE_BOOTMEM_INFO_NODE) += bootmem_info.o
 obj-$(CONFIG_GENERIC_IOREMAP) += ioremap.o
 obj-$(CONFIG_SHRINKER_DEBUG) += shrinker_debug.o
 obj-$(CONFIG_EXECMEM) += execmem.o
+obj-$(CONFIG_NUMA) += numa.o
diff --git a/kernel/numa.c b/mm/numa.c
similarity index 100%
rename from kernel/numa.c
rename to mm/numa.c
-- 
2.43.0

[PATCH v2 02/25] MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

sgi-ip27 is the only system that defines NODE_DATA() differently than
the rest of NUMA machines.

Add node_data array of struct pglist pointers that will point to
__node_data[node]->pglist and redefine NODE_DATA() to use node_data
array.

This will allow pulling declaration of node_data to the generic mm code
in the next commit.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/mips/include/asm/mach-ip27/mmzone.h | 5 ++++-
 arch/mips/sgi-ip27/ip27-memory.c         | 5 ++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h
index 08c36e50a860..629c3f290203 100644
--- a/arch/mips/include/asm/mach-ip27/mmzone.h
+++ b/arch/mips/include/asm/mach-ip27/mmzone.h
@@ -22,7 +22,10 @@ struct node_data {
 
 extern struct node_data *__node_data[];
 
-#define NODE_DATA(n)		(&__node_data[(n)]->pglist)
 #define hub_data(n)		(&__node_data[(n)]->hub)
 
+extern struct pglist_data *node_data[];
+
+#define NODE_DATA(nid)		(node_data[nid])
+
 #endif /* _ASM_MACH_MMZONE_H */
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index b8ca94cfb4fe..c30ef6958b97 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -34,8 +34,10 @@
 #define SLOT_PFNSHIFT		(SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT		(NASID_SHFT - PAGE_SHIFT)
 
-struct node_data *__node_data[MAX_NUMNODES];
+struct pglist_data *node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(node_data);
 
+struct node_data *__node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(__node_data);
 
 static u64 gen_region_mask(void)
@@ -361,6 +363,7 @@ static void __init node_mem_init(nasid_t node)
 	 */
 	__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
 	memset(__node_data[node], 0, PAGE_SIZE);
+	node_data[node] = &__node_data[node]->pglist;
 
 	NODE_DATA(node)->node_start_pfn = start_pfn;
 	NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
-- 
2.43.0

[PATCH v2 03/25] MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

For SGI IP27 machines node_possible_map is statically set to
NODE_MASK_ALL and it is not updated during NUMA initialization.

Ensure that it only contains nodes present in the system.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/mips/sgi-ip27/ip27-smp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 5d2652a1d35a..62733e049570 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -70,11 +70,13 @@ void cpu_node_probe(void)
 	gda_t *gdap = GDA;
 
 	nodes_clear(node_online_map);
+	nodes_clear(node_possible_map);
 	for (i = 0; i < MAX_NUMNODES; i++) {
 		nasid_t nasid = gdap->g_nasidtable[i];
 		if (nasid == INVALID_NASID)
 			break;
 		node_set_online(nasid);
+		node_set(nasid, node_possible_map);
 		highest = node_scan_cpus(nasid, highest);
 	}
 
-- 
2.43.0

[PATCH v2 04/25] MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Commit f8f9f21c7848 ("MIPS: Fix build error for loongson64 and
sgi-ip27") added HAVE_ARCH_NODEDATA_EXTENSION to sgi-ip27 to silence a
compilation error that happened because sgi-ip27 didn't define array of
pg_data_t as node_data like most other architectures did.

After addition of node_data array that matches other architectures and
after ensuring that offline nodes do not appear on node_possible_map, it
is safe to drop arch_alloc_nodedata() and HAVE_ARCH_NODEDATA_EXTENSION
from sgi-ip27.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/mips/Kconfig                |  1 -
 arch/mips/sgi-ip27/ip27-memory.c | 10 ----------
 2 files changed, 11 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f1aa1bf11166..954f12a9e669 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -733,7 +733,6 @@ config SGI_IP27
 	select WAR_R10000_LLSC
 	select MIPS_L1_CACHE_SHIFT_7
 	select NUMA
-	select HAVE_ARCH_NODEDATA_EXTENSION
 	help
 	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
 	  workstations.  To compile a Linux kernel that runs on these, say Y
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index c30ef6958b97..eb6d2fa41a8a 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -426,13 +426,3 @@ void __init mem_init(void)
 	memblock_free_all();
 	setup_zero_pages();	/* This comes from node 0 */
 }
-
-pg_data_t * __init arch_alloc_nodedata(int nid)
-{
-	return memblock_alloc(sizeof(pg_data_t), SMP_CACHE_BYTES);
-}
-
-void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
-{
-	__node_data[nid] = (struct node_data *)pgdat;
-}
-- 
2.43.0

[PATCH v2 05/25] MIPS: loongson64: rename __node_data to node_data

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Make definition of node_data match other architectures.
This will allow pulling declaration of node_data to the generic mm code in
the following commit.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/mips/include/asm/mach-loongson64/mmzone.h | 4 ++--
 arch/mips/loongson64/numa.c                    | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/mips/include/asm/mach-loongson64/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h
index a3d65d37b8b5..2effd5f8ed62 100644
--- a/arch/mips/include/asm/mach-loongson64/mmzone.h
+++ b/arch/mips/include/asm/mach-loongson64/mmzone.h
@@ -14,9 +14,9 @@
 #define pa_to_nid(addr)  (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
 #define nid_to_addrbase(nid) ((unsigned long)(nid) << NODE_ADDRSPACE_SHIFT)
 
-extern struct pglist_data *__node_data[];
+extern struct pglist_data *node_data[];
 
-#define NODE_DATA(n)		(__node_data[n])
+#define NODE_DATA(n)		(node_data[n])
 
 extern void __init prom_init_numa_memory(void);
 
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index 68dafd6d3e25..b50ce28d2741 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -29,8 +29,8 @@
 
 unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
 EXPORT_SYMBOL(__node_distances);
-struct pglist_data *__node_data[MAX_NUMNODES];
-EXPORT_SYMBOL(__node_data);
+struct pglist_data *node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(node_data);
 
 cpumask_t __node_cpumask[MAX_NUMNODES];
 EXPORT_SYMBOL(__node_cpumask);
@@ -107,7 +107,7 @@ static void __init node_mem_init(unsigned int node)
 	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
 	if (tnid != node)
 		pr_info("NODE_DATA(%d) on node %d\n", node, tnid);
-	__node_data[node] = nd;
+	node_data[node] = nd;
 	NODE_DATA(node)->node_start_pfn = start_pfn;
 	NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
@@ -206,5 +206,5 @@ pg_data_t * __init arch_alloc_nodedata(int nid)
 
 void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
 {
-	__node_data[nid] = pgdat;
+	node_data[nid] = pgdat;
 }
-- 
2.43.0

[PATCH v2 06/25] MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Commit f8f9f21c7848 ("MIPS: Fix build error for loongson64 and
sgi-ip27") added HAVE_ARCH_NODEDATA_EXTENSION to loongson64 to silence a
compilation error that happened because loongson64 didn't define array
of pg_data_t as node_data like most other architectures did.

After rename of __node_data to node_data arch_alloc_nodedata() and
HAVE_ARCH_NODEDATA_EXTENSION can be dropped from loongson64.

Since it was the only user of HAVE_ARCH_NODEDATA_EXTENSION config option
also remove this option from arch/mips/Kconfig.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/mips/Kconfig           |  4 ----
 arch/mips/loongson64/numa.c | 10 ----------
 2 files changed, 14 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 954f12a9e669..8221e47457aa 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -501,7 +501,6 @@ config MACH_LOONGSON64
 	select USE_OF
 	select BUILTIN_DTB
 	select PCI_HOST_GENERIC
-	select HAVE_ARCH_NODEDATA_EXTENSION if NUMA
 	help
 	  This enables the support of Loongson-2/3 family of machines.
 
@@ -2608,9 +2607,6 @@ config NUMA
 config SYS_SUPPORTS_NUMA
 	bool
 
-config HAVE_ARCH_NODEDATA_EXTENSION
-	bool
-
 config RELOCATABLE
 	bool "Relocatable kernel"
 	depends on SYS_SUPPORTS_RELOCATABLE
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index b50ce28d2741..64fcfaa885b6 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -198,13 +198,3 @@ void __init prom_init_numa_memory(void)
 	pr_info("CP0_PageGrain: CP0 5.1 (0x%x)\n", read_c0_pagegrain());
 	prom_meminit();
 }
-
-pg_data_t * __init arch_alloc_nodedata(int nid)
-{
-	return memblock_alloc(sizeof(pg_data_t), SMP_CACHE_BYTES);
-}
-
-void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
-{
-	node_data[nid] = pgdat;
-}
-- 
2.43.0

[PATCH v2 07/25] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

There are no users of HAVE_ARCH_NODEDATA_EXTENSION left, so
arch_alloc_nodedata() and arch_refresh_nodedata() are not needed
anymore.

Replace the call to arch_alloc_nodedata() in free_area_init() with
memblock_alloc(), remove arch_refresh_nodedata() and cleanup
include/linux/memory_hotplug.h from the associated ifdefery.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 include/linux/memory_hotplug.h | 48 ----------------------------------
 mm/mm_init.c                   |  3 +--
 2 files changed, 1 insertion(+), 50 deletions(-)

diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 7a9ff464608d..978c0dfb64a1 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -16,54 +16,6 @@ struct resource;
 struct vmem_altmap;
 struct dev_pagemap;
 
-#ifdef CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
-/*
- * For supporting node-hotadd, we have to allocate a new pgdat.
- *
- * If an arch has generic style NODE_DATA(),
- * node_data[nid] = kzalloc() works well. But it depends on the architecture.
- *
- * In general, generic_alloc_nodedata() is used.
- *
- */
-extern pg_data_t *arch_alloc_nodedata(int nid);
-extern void arch_refresh_nodedata(int nid, pg_data_t *pgdat);
-
-#else /* CONFIG_HAVE_ARCH_NODEDATA_EXTENSION */
-
-#define arch_alloc_nodedata(nid)	generic_alloc_nodedata(nid)
-
-#ifdef CONFIG_NUMA
-/*
- * XXX: node aware allocation can't work well to get new node's memory at this time.
- *	Because, pgdat for the new node is not allocated/initialized yet itself.
- *	To use new node's memory, more consideration will be necessary.
- */
-#define generic_alloc_nodedata(nid)				\
-({								\
-	memblock_alloc(sizeof(*pgdat), SMP_CACHE_BYTES);	\
-})
-
-extern pg_data_t *node_data[];
-static inline void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
-{
-	node_data[nid] = pgdat;
-}
-
-#else /* !CONFIG_NUMA */
-
-/* never called */
-static inline pg_data_t *generic_alloc_nodedata(int nid)
-{
-	BUG();
-	return NULL;
-}
-static inline void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
-{
-}
-#endif /* CONFIG_NUMA */
-#endif /* CONFIG_HAVE_ARCH_NODEDATA_EXTENSION */
-
 #ifdef CONFIG_MEMORY_HOTPLUG
 struct page *pfn_to_online_page(unsigned long pfn);
 
diff --git a/mm/mm_init.c b/mm/mm_init.c
index 3ec04933f7fd..e1b3ea0523bd 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -1831,11 +1831,10 @@ void __init free_area_init(unsigned long *max_zone_pfn)
 
 		if (!node_online(nid)) {
 			/* Allocator not initialized yet */
-			pgdat = arch_alloc_nodedata(nid);
+			pgdat = memblock_alloc(sizeof(*pgdat), SMP_CACHE_BYTES);
 			if (!pgdat)
 				panic("Cannot allocate %zuB for node %d.\n",
 				       sizeof(*pgdat), nid);
-			arch_refresh_nodedata(nid, pgdat);
 		}
 
 		pgdat = NODE_DATA(nid);
-- 
2.43.0

[PATCH v2 08/25] arch, mm: move definition of node_data to generic code

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Every architecture that supports NUMA defines node_data in the same way:

	struct pglist_data *node_data[MAX_NUMNODES];

No reason to keep multiple copies of this definition and its forward
declarations, especially when such forward declaration is the only thing
in include/asm/mmzone.h for many architectures.

Add definition and declaration of node_data to generic code and drop
architecture-specific versions.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
---
 arch/arm64/include/asm/Kbuild                  |  1 +
 arch/arm64/include/asm/mmzone.h                | 13 -------------
 arch/arm64/include/asm/topology.h              |  1 +
 arch/loongarch/include/asm/Kbuild              |  1 +
 arch/loongarch/include/asm/mmzone.h            | 16 ----------------
 arch/loongarch/include/asm/topology.h          |  1 +
 arch/loongarch/kernel/numa.c                   |  3 ---
 arch/mips/include/asm/mach-ip27/mmzone.h       |  4 ----
 arch/mips/include/asm/mach-loongson64/mmzone.h |  4 ----
 arch/mips/loongson64/numa.c                    |  2 --
 arch/mips/sgi-ip27/ip27-memory.c               |  3 ---
 arch/powerpc/include/asm/mmzone.h              |  6 ------
 arch/powerpc/mm/numa.c                         |  2 --
 arch/riscv/include/asm/Kbuild                  |  1 +
 arch/riscv/include/asm/mmzone.h                | 13 -------------
 arch/riscv/include/asm/topology.h              |  4 ++++
 arch/s390/include/asm/Kbuild                   |  1 +
 arch/s390/include/asm/mmzone.h                 | 17 -----------------
 arch/s390/kernel/numa.c                        |  3 ---
 arch/sh/include/asm/mmzone.h                   |  3 ---
 arch/sh/mm/numa.c                              |  3 ---
 arch/sparc/include/asm/mmzone.h                |  4 ----
 arch/sparc/mm/init_64.c                        |  2 --
 arch/x86/include/asm/Kbuild                    |  1 +
 arch/x86/include/asm/mmzone.h                  |  6 ------
 arch/x86/include/asm/mmzone_32.h               | 17 -----------------
 arch/x86/include/asm/mmzone_64.h               | 18 ------------------
 arch/x86/mm/numa.c                             |  3 ---
 drivers/base/arch_numa.c                       |  2 --
 include/asm-generic/mmzone.h                   |  5 +++++
 include/linux/numa.h                           |  3 +++
 mm/numa.c                                      |  3 +++
 32 files changed, 22 insertions(+), 144 deletions(-)
 delete mode 100644 arch/arm64/include/asm/mmzone.h
 delete mode 100644 arch/loongarch/include/asm/mmzone.h
 delete mode 100644 arch/riscv/include/asm/mmzone.h
 delete mode 100644 arch/s390/include/asm/mmzone.h
 delete mode 100644 arch/x86/include/asm/mmzone.h
 delete mode 100644 arch/x86/include/asm/mmzone_32.h
 delete mode 100644 arch/x86/include/asm/mmzone_64.h
 create mode 100644 include/asm-generic/mmzone.h

diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index 4b6d2d52053e..4aaaa821ab6b 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 generic-y += early_ioremap.h
 generic-y += mcs_spinlock.h
+generic-y += mmzone.h
 generic-y += qrwlock.h
 generic-y += qspinlock.h
 generic-y += parport.h
diff --git a/arch/arm64/include/asm/mmzone.h b/arch/arm64/include/asm/mmzone.h
deleted file mode 100644
index fa17e01d9ab2..000000000000
--- a/arch/arm64/include/asm/mmzone.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MMZONE_H
-#define __ASM_MMZONE_H
-
-#ifdef CONFIG_NUMA
-
-#include <asm/numa.h>
-
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid)		(node_data[(nid)])
-
-#endif /* CONFIG_NUMA */
-#endif /* __ASM_MMZONE_H */
diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h
index 0f6ef432fb84..5fc3af9f8f29 100644
--- a/arch/arm64/include/asm/topology.h
+++ b/arch/arm64/include/asm/topology.h
@@ -5,6 +5,7 @@
 #include <linux/cpumask.h>
 
 #ifdef CONFIG_NUMA
+#include <asm/numa.h>
 
 struct pci_bus;
 int pcibus_to_node(struct pci_bus *bus);
diff --git a/arch/loongarch/include/asm/Kbuild b/arch/loongarch/include/asm/Kbuild
index c862672ed953..2804f2a2ad61 100644
--- a/arch/loongarch/include/asm/Kbuild
+++ b/arch/loongarch/include/asm/Kbuild
@@ -15,6 +15,7 @@ generic-y += fcntl.h
 generic-y += ioctl.h
 generic-y += ioctls.h
 generic-y += mman.h
+generic-y += mmzone.h
 generic-y += msgbuf.h
 generic-y += sembuf.h
 generic-y += shmbuf.h
diff --git a/arch/loongarch/include/asm/mmzone.h b/arch/loongarch/include/asm/mmzone.h
deleted file mode 100644
index 2b9a90727e19..000000000000
--- a/arch/loongarch/include/asm/mmzone.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Author: Huacai Chen (chenhuacai@loongson.cn)
- * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
- */
-#ifndef _ASM_MMZONE_H_
-#define _ASM_MMZONE_H_
-
-#include <asm/page.h>
-#include <asm/numa.h>
-
-extern struct pglist_data *node_data[];
-
-#define NODE_DATA(nid)	(node_data[(nid)])
-
-#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/loongarch/include/asm/topology.h b/arch/loongarch/include/asm/topology.h
index 66128dec0bf6..50273c9187d0 100644
--- a/arch/loongarch/include/asm/topology.h
+++ b/arch/loongarch/include/asm/topology.h
@@ -8,6 +8,7 @@
 #include <linux/smp.h>
 
 #ifdef CONFIG_NUMA
+#include <asm/numa.h>
 
 extern cpumask_t cpus_on_node[];
 
diff --git a/arch/loongarch/kernel/numa.c b/arch/loongarch/kernel/numa.c
index 8fe21f868f72..acada671e020 100644
--- a/arch/loongarch/kernel/numa.c
+++ b/arch/loongarch/kernel/numa.c
@@ -27,10 +27,7 @@
 #include <asm/time.h>
 
 int numa_off;
-struct pglist_data *node_data[MAX_NUMNODES];
 unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES];
-
-EXPORT_SYMBOL(node_data);
 EXPORT_SYMBOL(node_distances);
 
 static struct numa_meminfo numa_meminfo;
diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h
index 629c3f290203..56959eb9cb26 100644
--- a/arch/mips/include/asm/mach-ip27/mmzone.h
+++ b/arch/mips/include/asm/mach-ip27/mmzone.h
@@ -24,8 +24,4 @@ extern struct node_data *__node_data[];
 
 #define hub_data(n)		(&__node_data[(n)]->hub)
 
-extern struct pglist_data *node_data[];
-
-#define NODE_DATA(nid)		(node_data[nid])
-
 #endif /* _ASM_MACH_MMZONE_H */
diff --git a/arch/mips/include/asm/mach-loongson64/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h
index 2effd5f8ed62..8fb70fd3c9c4 100644
--- a/arch/mips/include/asm/mach-loongson64/mmzone.h
+++ b/arch/mips/include/asm/mach-loongson64/mmzone.h
@@ -14,10 +14,6 @@
 #define pa_to_nid(addr)  (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
 #define nid_to_addrbase(nid) ((unsigned long)(nid) << NODE_ADDRSPACE_SHIFT)
 
-extern struct pglist_data *node_data[];
-
-#define NODE_DATA(n)		(node_data[n])
-
 extern void __init prom_init_numa_memory(void);
 
 #endif /* _ASM_MACH_MMZONE_H */
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index 64fcfaa885b6..d56238745744 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -29,8 +29,6 @@
 
 unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
 EXPORT_SYMBOL(__node_distances);
-struct pglist_data *node_data[MAX_NUMNODES];
-EXPORT_SYMBOL(node_data);
 
 cpumask_t __node_cpumask[MAX_NUMNODES];
 EXPORT_SYMBOL(__node_cpumask);
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index eb6d2fa41a8a..1963313f55d8 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -34,9 +34,6 @@
 #define SLOT_PFNSHIFT		(SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT		(NASID_SHFT - PAGE_SHIFT)
 
-struct pglist_data *node_data[MAX_NUMNODES];
-EXPORT_SYMBOL(node_data);
-
 struct node_data *__node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(__node_data);
 
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index da827d2d0866..d99863cd6cde 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -20,12 +20,6 @@
 
 #ifdef CONFIG_NUMA
 
-extern struct pglist_data *node_data[];
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid)		(node_data[nid])
-
 /*
  * Following are specific to this numa platform.
  */
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index a490724e84ad..8c18973cd71e 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -43,11 +43,9 @@ static char *cmdline __initdata;
 
 int numa_cpu_lookup_table[NR_CPUS];
 cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
-struct pglist_data *node_data[MAX_NUMNODES];
 
 EXPORT_SYMBOL(numa_cpu_lookup_table);
 EXPORT_SYMBOL(node_to_cpumask_map);
-EXPORT_SYMBOL(node_data);
 
 static int primary_domain_index;
 static int n_mem_addr_cells, n_mem_size_cells;
diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild
index 504f8b7e72d4..e44f168f60fc 100644
--- a/arch/riscv/include/asm/Kbuild
+++ b/arch/riscv/include/asm/Kbuild
@@ -2,6 +2,7 @@
 generic-y += early_ioremap.h
 generic-y += flat.h
 generic-y += kvm_para.h
+generic-y += mmzone.h
 generic-y += parport.h
 generic-y += spinlock.h
 generic-y += spinlock_types.h
diff --git a/arch/riscv/include/asm/mmzone.h b/arch/riscv/include/asm/mmzone.h
deleted file mode 100644
index fa17e01d9ab2..000000000000
--- a/arch/riscv/include/asm/mmzone.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MMZONE_H
-#define __ASM_MMZONE_H
-
-#ifdef CONFIG_NUMA
-
-#include <asm/numa.h>
-
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid)		(node_data[(nid)])
-
-#endif /* CONFIG_NUMA */
-#endif /* __ASM_MMZONE_H */
diff --git a/arch/riscv/include/asm/topology.h b/arch/riscv/include/asm/topology.h
index 61183688bdd5..fe1a8bf6902d 100644
--- a/arch/riscv/include/asm/topology.h
+++ b/arch/riscv/include/asm/topology.h
@@ -4,6 +4,10 @@
 
 #include <linux/arch_topology.h>
 
+#ifdef CONFIG_NUMA
+#include <asm/numa.h>
+#endif
+
 /* Replace task scheduler's default frequency-invariant accounting */
 #define arch_scale_freq_tick		topology_scale_freq_tick
 #define arch_set_freq_scale		topology_set_freq_scale
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
index 4b904110d27c..297bf7157968 100644
--- a/arch/s390/include/asm/Kbuild
+++ b/arch/s390/include/asm/Kbuild
@@ -7,3 +7,4 @@ generated-y += unistd_nr.h
 generic-y += asm-offsets.h
 generic-y += kvm_types.h
 generic-y += mcs_spinlock.h
+generic-y += mmzone.h
diff --git a/arch/s390/include/asm/mmzone.h b/arch/s390/include/asm/mmzone.h
deleted file mode 100644
index 73e3e7c6976c..000000000000
--- a/arch/s390/include/asm/mmzone.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * NUMA support for s390
- *
- * Copyright IBM Corp. 2015
- */
-
-#ifndef _ASM_S390_MMZONE_H
-#define _ASM_S390_MMZONE_H
-
-#ifdef CONFIG_NUMA
-
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid) (node_data[nid])
-
-#endif /* CONFIG_NUMA */
-#endif /* _ASM_S390_MMZONE_H */
diff --git a/arch/s390/kernel/numa.c b/arch/s390/kernel/numa.c
index 23ab9f02f278..ddc1448ea2e1 100644
--- a/arch/s390/kernel/numa.c
+++ b/arch/s390/kernel/numa.c
@@ -14,9 +14,6 @@
 #include <linux/node.h>
 #include <asm/numa.h>
 
-struct pglist_data *node_data[MAX_NUMNODES];
-EXPORT_SYMBOL(node_data);
-
 void __init numa_setup(void)
 {
 	int nid;
diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h
index 7b8dead2723d..63f88b465e39 100644
--- a/arch/sh/include/asm/mmzone.h
+++ b/arch/sh/include/asm/mmzone.h
@@ -5,9 +5,6 @@
 #ifdef CONFIG_NUMA
 #include <linux/numa.h>
 
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid)		(node_data[nid])
-
 static inline int pfn_to_nid(unsigned long pfn)
 {
 	int nid;
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 50f0dc1744d0..9bc212b5e762 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -14,9 +14,6 @@
 #include <linux/pfn.h>
 #include <asm/sections.h>
 
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL_GPL(node_data);
-
 /*
  * On SH machines the conventional approach is to stash system RAM
  * in node 0, and other memory blocks in to node 1 and up, ordered by
diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h
index a236d8aa893a..74eb2c71d077 100644
--- a/arch/sparc/include/asm/mmzone.h
+++ b/arch/sparc/include/asm/mmzone.h
@@ -6,10 +6,6 @@
 
 #include <linux/cpumask.h>
 
-extern struct pglist_data *node_data[];
-
-#define NODE_DATA(nid)		(node_data[nid])
-
 extern int numa_cpu_lookup_table[];
 extern cpumask_t numa_cpumask_lookup_table[];
 
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 00b247d924a9..3cb698204609 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1115,11 +1115,9 @@ static void init_node_masks_nonnuma(void)
 }
 
 #ifdef CONFIG_NUMA
-struct pglist_data *node_data[MAX_NUMNODES];
 
 EXPORT_SYMBOL(numa_cpu_lookup_table);
 EXPORT_SYMBOL(numa_cpumask_lookup_table);
-EXPORT_SYMBOL(node_data);
 
 static int scan_pio_for_cfg_handle(struct mdesc_handle *md, u64 pio,
 				   u32 cfg_handle)
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index a192bdea69e2..6c23d1661b17 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -11,3 +11,4 @@ generated-y += xen-hypercalls.h
 
 generic-y += early_ioremap.h
 generic-y += mcs_spinlock.h
+generic-y += mmzone.h
diff --git a/arch/x86/include/asm/mmzone.h b/arch/x86/include/asm/mmzone.h
deleted file mode 100644
index c41b41edd691..000000000000
--- a/arch/x86/include/asm/mmzone.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef CONFIG_X86_32
-# include <asm/mmzone_32.h>
-#else
-# include <asm/mmzone_64.h>
-#endif
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
deleted file mode 100644
index 2d4515e8b7df..000000000000
--- a/arch/x86/include/asm/mmzone_32.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002
- *
- */
-
-#ifndef _ASM_X86_MMZONE_32_H
-#define _ASM_X86_MMZONE_32_H
-
-#include <asm/smp.h>
-
-#ifdef CONFIG_NUMA
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid)	(node_data[nid])
-#endif /* CONFIG_NUMA */
-
-#endif /* _ASM_X86_MMZONE_32_H */
diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h
deleted file mode 100644
index 0c585046f744..000000000000
--- a/arch/x86/include/asm/mmzone_64.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* K8 NUMA support */
-/* Copyright 2002,2003 by Andi Kleen, SuSE Labs */
-/* 2.5 Version loosely based on the NUMAQ Code by Pat Gaughen. */
-#ifndef _ASM_X86_MMZONE_64_H
-#define _ASM_X86_MMZONE_64_H
-
-#ifdef CONFIG_NUMA
-
-#include <linux/mmdebug.h>
-#include <asm/smp.h>
-
-extern struct pglist_data *node_data[];
-
-#define NODE_DATA(nid)		(node_data[nid])
-
-#endif
-#endif /* _ASM_X86_MMZONE_64_H */
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 6ce10e3c6228..7de725d6bb05 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -24,9 +24,6 @@
 int numa_off;
 nodemask_t numa_nodes_parsed __initdata;
 
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
-
 static struct numa_meminfo numa_meminfo __initdata_or_meminfo;
 static struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
 
diff --git a/drivers/base/arch_numa.c b/drivers/base/arch_numa.c
index 5b59d133b6af..9b71ad2869f1 100644
--- a/drivers/base/arch_numa.c
+++ b/drivers/base/arch_numa.c
@@ -15,8 +15,6 @@
 
 #include <asm/sections.h>
 
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
 nodemask_t numa_nodes_parsed __initdata;
 static int cpu_to_node_map[NR_CPUS] = { [0 ... NR_CPUS-1] = NUMA_NO_NODE };
 
diff --git a/include/asm-generic/mmzone.h b/include/asm-generic/mmzone.h
new file mode 100644
index 000000000000..2ab5193e8394
--- /dev/null
+++ b/include/asm-generic/mmzone.h
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_GENERIC_MMZONE_H
+#define _ASM_GENERIC_MMZONE_H
+
+#endif
diff --git a/include/linux/numa.h b/include/linux/numa.h
index eb19503604fe..e5841d4057ab 100644
--- a/include/linux/numa.h
+++ b/include/linux/numa.h
@@ -30,6 +30,9 @@ static inline bool numa_valid_node(int nid)
 #ifdef CONFIG_NUMA
 #include <asm/sparsemem.h>
 
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)	(node_data[nid])
+
 /* Generic implementation available */
 int numa_nearest_node(int node, unsigned int state);
 
diff --git a/mm/numa.c b/mm/numa.c
index 67ca6b8585c0..8c157d41c026 100644
--- a/mm/numa.c
+++ b/mm/numa.c
@@ -3,6 +3,9 @@
 #include <linux/printk.h>
 #include <linux/numa.h>
 
+struct pglist_data *node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(node_data);
+
 /* Stub functions: */
 
 #ifndef memory_add_physaddr_to_nid
-- 
2.43.0

[PATCH v2 09/25] arch, mm: pull out allocation of NODE_DATA to generic code

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Architectures that support NUMA duplicate the code that allocates
NODE_DATA on the node-local memory with slight variations in reporting
of the addresses where the memory was allocated.

Use x86 version as the basis for the generic alloc_node_data() function
and call this function in architecture specific numa initialization.

Round up node data size to SMP_CACHE_BYTES rather than to PAGE_SIZE like
x86 used to do since the bootmem era when allocation granularity was
PAGE_SIZE anyway.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/loongarch/kernel/numa.c | 18 ------------------
 arch/mips/loongson64/numa.c  | 16 ++--------------
 arch/powerpc/mm/numa.c       | 24 +++---------------------
 arch/sh/mm/init.c            |  7 +------
 arch/sparc/mm/init_64.c      |  9 ++-------
 arch/x86/mm/numa.c           | 34 +---------------------------------
 drivers/base/arch_numa.c     | 21 +--------------------
 include/linux/numa.h         |  2 ++
 mm/numa.c                    | 27 +++++++++++++++++++++++++++
 9 files changed, 39 insertions(+), 119 deletions(-)

diff --git a/arch/loongarch/kernel/numa.c b/arch/loongarch/kernel/numa.c
index acada671e020..84fe7f854820 100644
--- a/arch/loongarch/kernel/numa.c
+++ b/arch/loongarch/kernel/numa.c
@@ -187,24 +187,6 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
 	return numa_add_memblk_to(nid, start, end, &numa_meminfo);
 }
 
-static void __init alloc_node_data(int nid)
-{
-	void *nd;
-	unsigned long nd_pa;
-	size_t nd_sz = roundup(sizeof(pg_data_t), PAGE_SIZE);
-
-	nd_pa = memblock_phys_alloc_try_nid(nd_sz, SMP_CACHE_BYTES, nid);
-	if (!nd_pa) {
-		pr_err("Cannot find %zu Byte for node_data (initial node: %d)\n", nd_sz, nid);
-		return;
-	}
-
-	nd = __va(nd_pa);
-
-	node_data[nid] = nd;
-	memset(nd, 0, sizeof(pg_data_t));
-}
-
 static void __init node_mem_init(unsigned int node)
 {
 	unsigned long start_pfn, end_pfn;
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index d56238745744..8388400d052f 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -81,12 +81,8 @@ static void __init init_topology_matrix(void)
 
 static void __init node_mem_init(unsigned int node)
 {
-	struct pglist_data *nd;
 	unsigned long node_addrspace_offset;
 	unsigned long start_pfn, end_pfn;
-	unsigned long nd_pa;
-	int tnid;
-	const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES);
 
 	node_addrspace_offset = nid_to_addrbase(node);
 	pr_info("Node%d's addrspace_offset is 0x%lx\n",
@@ -96,16 +92,8 @@ static void __init node_mem_init(unsigned int node)
 	pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx\n",
 		node, start_pfn, end_pfn);
 
-	nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, node);
-	if (!nd_pa)
-		panic("Cannot allocate %zu bytes for node %d data\n",
-		      nd_size, node);
-	nd = __va(nd_pa);
-	memset(nd, 0, sizeof(struct pglist_data));
-	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
-	if (tnid != node)
-		pr_info("NODE_DATA(%d) on node %d\n", node, tnid);
-	node_data[node] = nd;
+	alloc_node_data(node);
+
 	NODE_DATA(node)->node_start_pfn = start_pfn;
 	NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 8c18973cd71e..4c54764af160 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1081,27 +1081,9 @@ void __init dump_numa_cpu_topology(void)
 static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
 {
 	u64 spanned_pages = end_pfn - start_pfn;
-	const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES);
-	u64 nd_pa;
-	void *nd;
-	int tnid;
-
-	nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
-	if (!nd_pa)
-		panic("Cannot allocate %zu bytes for node %d data\n",
-		      nd_size, nid);
-
-	nd = __va(nd_pa);
-
-	/* report and initialize */
-	pr_info("  NODE_DATA [mem %#010Lx-%#010Lx]\n",
-		nd_pa, nd_pa + nd_size - 1);
-	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
-	if (tnid != nid)
-		pr_info("    NODE_DATA(%d) on node %d\n", nid, tnid);
-
-	node_data[nid] = nd;
-	memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
+
+	alloc_node_data(nid);
+
 	NODE_DATA(nid)->node_id = nid;
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
 	NODE_DATA(nid)->node_spanned_pages = spanned_pages;
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index bf1b54055316..5cc89a0932c3 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -212,12 +212,7 @@ void __init allocate_pgdat(unsigned int nid)
 	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
 
 #ifdef CONFIG_NUMA
-	NODE_DATA(nid) = memblock_alloc_try_nid(
-				sizeof(struct pglist_data),
-				SMP_CACHE_BYTES, MEMBLOCK_LOW_LIMIT,
-				MEMBLOCK_ALLOC_ACCESSIBLE, nid);
-	if (!NODE_DATA(nid))
-		panic("Can't allocate pgdat for node %d\n", nid);
+	alloc_node_data(nid);
 #endif
 
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 3cb698204609..83279c43572d 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1075,14 +1075,9 @@ static void __init allocate_node_data(int nid)
 {
 	struct pglist_data *p;
 	unsigned long start_pfn, end_pfn;
-#ifdef CONFIG_NUMA
 
-	NODE_DATA(nid) = memblock_alloc_node(sizeof(struct pglist_data),
-					     SMP_CACHE_BYTES, nid);
-	if (!NODE_DATA(nid)) {
-		prom_printf("Cannot allocate pglist_data for nid[%d]\n", nid);
-		prom_halt();
-	}
+#ifdef CONFIG_NUMA
+	alloc_node_data(nid);
 
 	NODE_DATA(nid)->node_id = nid;
 #endif
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 7de725d6bb05..5e1dde26674b 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -191,39 +191,6 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
 	return numa_add_memblk_to(nid, start, end, &numa_meminfo);
 }
 
-/* Allocate NODE_DATA for a node on the local memory */
-static void __init alloc_node_data(int nid)
-{
-	const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
-	u64 nd_pa;
-	void *nd;
-	int tnid;
-
-	/*
-	 * Allocate node data.  Try node-local memory and then any node.
-	 * Never allocate in DMA zone.
-	 */
-	nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
-	if (!nd_pa) {
-		pr_err("Cannot find %zu bytes in any node (initial node: %d)\n",
-		       nd_size, nid);
-		return;
-	}
-	nd = __va(nd_pa);
-
-	/* report and initialize */
-	printk(KERN_INFO "NODE_DATA(%d) allocated [mem %#010Lx-%#010Lx]\n", nid,
-	       nd_pa, nd_pa + nd_size - 1);
-	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
-	if (tnid != nid)
-		printk(KERN_INFO "    NODE_DATA(%d) on node %d\n", nid, tnid);
-
-	node_data[nid] = nd;
-	memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
-
-	node_set_online(nid);
-}
-
 /**
  * numa_cleanup_meminfo - Cleanup a numa_meminfo
  * @mi: numa_meminfo to clean up
@@ -571,6 +538,7 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 			continue;
 
 		alloc_node_data(nid);
+		node_set_online(nid);
 	}
 
 	/* Dump memblock with node info and return. */
diff --git a/drivers/base/arch_numa.c b/drivers/base/arch_numa.c
index 9b71ad2869f1..2ebf12eab99f 100644
--- a/drivers/base/arch_numa.c
+++ b/drivers/base/arch_numa.c
@@ -216,30 +216,11 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
  */
 static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
 {
-	const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES);
-	u64 nd_pa;
-	void *nd;
-	int tnid;
-
 	if (start_pfn >= end_pfn)
 		pr_info("Initmem setup node %d [<memory-less node>]\n", nid);
 
-	nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
-	if (!nd_pa)
-		panic("Cannot allocate %zu bytes for node %d data\n",
-		      nd_size, nid);
-
-	nd = __va(nd_pa);
-
-	/* report and initialize */
-	pr_info("NODE_DATA [mem %#010Lx-%#010Lx]\n",
-		nd_pa, nd_pa + nd_size - 1);
-	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
-	if (tnid != nid)
-		pr_info("NODE_DATA(%d) on node %d\n", nid, tnid);
+	alloc_node_data(nid);
 
-	node_data[nid] = nd;
-	memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
 	NODE_DATA(nid)->node_id = nid;
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
 	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
diff --git a/include/linux/numa.h b/include/linux/numa.h
index e5841d4057ab..3b12d8ca0afd 100644
--- a/include/linux/numa.h
+++ b/include/linux/numa.h
@@ -33,6 +33,8 @@ static inline bool numa_valid_node(int nid)
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
 
+void __init alloc_node_data(int nid);
+
 /* Generic implementation available */
 int numa_nearest_node(int node, unsigned int state);
 
diff --git a/mm/numa.c b/mm/numa.c
index 8c157d41c026..67a0d7734a98 100644
--- a/mm/numa.c
+++ b/mm/numa.c
@@ -1,11 +1,38 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
+#include <linux/memblock.h>
 #include <linux/printk.h>
 #include <linux/numa.h>
 
 struct pglist_data *node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
 
+/* Allocate NODE_DATA for a node on the local memory */
+void __init alloc_node_data(int nid)
+{
+	const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES);
+	u64 nd_pa;
+	void *nd;
+	int tnid;
+
+	/* Allocate node data.  Try node-local memory and then any node. */
+	nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
+	if (!nd_pa)
+		panic("Cannot allocate %zu bytes for node %d data\n",
+		      nd_size, nid);
+	nd = __va(nd_pa);
+
+	/* report and initialize */
+	pr_info("NODE_DATA(%d) allocated [mem %#010Lx-%#010Lx]\n", nid,
+		nd_pa, nd_pa + nd_size - 1);
+	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
+	if (tnid != nid)
+		pr_info("    NODE_DATA(%d) on node %d\n", nid, tnid);
+
+	node_data[nid] = nd;
+	memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
+}
+
 /* Stub functions: */
 
 #ifndef memory_add_physaddr_to_nid
-- 
2.43.0

[PATCH v2 10/25] x86/numa: simplify numa_distance allocation

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Allocation of numa_distance uses memblock_phys_alloc_range() to limit
allocation to be below the last mapped page.

But NUMA initializaition runs after the direct map is populated and
there is also code in setup_arch() that adjusts memblock limit to
reflect how much memory is already mapped in the direct map.

Simplify the allocation of numa_distance and use plain memblock_alloc().

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/x86/mm/numa.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 5e1dde26674b..edfc38803779 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -331,7 +331,6 @@ static int __init numa_alloc_distance(void)
 	nodemask_t nodes_parsed;
 	size_t size;
 	int i, j, cnt = 0;
-	u64 phys;
 
 	/* size the new table and allocate it */
 	nodes_parsed = numa_nodes_parsed;
@@ -342,16 +341,14 @@ static int __init numa_alloc_distance(void)
 	cnt++;
 	size = cnt * cnt * sizeof(numa_distance[0]);
 
-	phys = memblock_phys_alloc_range(size, PAGE_SIZE, 0,
-					 PFN_PHYS(max_pfn_mapped));
-	if (!phys) {
+	numa_distance = memblock_alloc(size, PAGE_SIZE);
+	if (!numa_distance) {
 		pr_warn("Warning: can't allocate distance table!\n");
 		/* don't retry until explicitly reset */
 		numa_distance = (void *)1LU;
 		return -ENOMEM;
 	}
 
-	numa_distance = __va(phys);
 	numa_distance_cnt = cnt;
 
 	/* fill with the default distances */
-- 
2.43.0

[PATCH v2 11/25] x86/numa: use get_pfn_range_for_nid to verify that node spans memory

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Instead of looping over numa_meminfo array to detect node's start and
end addresses use get_pfn_range_for_init().

This is shorter and make it easier to lift numa_memblks to generic code.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/x86/mm/numa.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index edfc38803779..cfe7e5477cf8 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -521,17 +521,10 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 
 	/* Finally register nodes. */
 	for_each_node_mask(nid, node_possible_map) {
-		u64 start = PFN_PHYS(max_pfn);
-		u64 end = 0;
+		unsigned long start_pfn, end_pfn;
 
-		for (i = 0; i < mi->nr_blks; i++) {
-			if (nid != mi->blk[i].nid)
-				continue;
-			start = min(mi->blk[i].start, start);
-			end = max(mi->blk[i].end, end);
-		}
-
-		if (start >= end)
+		get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+		if (start_pfn >= end_pfn)
 			continue;
 
 		alloc_node_data(nid);
-- 
2.43.0

[PATCH v2 12/25] x86/numa: move FAKE_NODE_* defines to numa_emu

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

The definitions of FAKE_NODE_MIN_SIZE and FAKE_NODE_MIN_HASH_MASK are
only used by numa emulation code, make them local to
arch/x86/mm/numa_emulation.c

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/x86/include/asm/numa.h  | 2 --
 arch/x86/mm/numa_emulation.c | 3 +++
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index ef2844d69173..2dab1ada96cf 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -71,8 +71,6 @@ void debug_cpumask_set_cpu(int cpu, int node, bool enable);
 #endif
 
 #ifdef CONFIG_NUMA_EMU
-#define FAKE_NODE_MIN_SIZE	((u64)32 << 20)
-#define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
 int numa_emu_cmdline(char *str);
 #else /* CONFIG_NUMA_EMU */
 static inline int numa_emu_cmdline(char *str)
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index 9a9305367fdd..1ce22e315b80 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -10,6 +10,9 @@
 
 #include "numa_internal.h"
 
+#define FAKE_NODE_MIN_SIZE	((u64)32 << 20)
+#define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
+
 static int emu_nid_to_phys[MAX_NUMNODES];
 static char *emu_cmdline __initdata;
 
-- 
2.43.0

[PATCH v2 13/25] x86/numa_emu: simplify allocation of phys_dist

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

By the time numa_emulation() is called, all physical memory is already
mapped in the direct map and there is no need to define limits for
memblock allocation.

Replace memblock_phys_alloc_range() with memblock_alloc().

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/x86/mm/numa_emulation.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index 1ce22e315b80..439804e21962 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -448,15 +448,11 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 
 	/* copy the physical distance table */
 	if (numa_dist_cnt) {
-		u64 phys;
-
-		phys = memblock_phys_alloc_range(phys_size, PAGE_SIZE, 0,
-						 PFN_PHYS(max_pfn_mapped));
-		if (!phys) {
+		phys_dist = memblock_alloc(phys_size, PAGE_SIZE);
+		if (!phys_dist) {
 			pr_warn("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");
 			goto no_emu;
 		}
-		phys_dist = __va(phys);
 
 		for (i = 0; i < numa_dist_cnt; i++)
 			for (j = 0; j < numa_dist_cnt; j++)
-- 
2.43.0

[PATCH v2 14/25] x86/numa_emu: split __apicid_to_node update to a helper function

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

This is required to make numa emulation code architecture independent so
that it can be moved to generic code in following commits.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/x86/include/asm/numa.h  |  2 ++
 arch/x86/mm/numa.c           | 22 ++++++++++++++++++++++
 arch/x86/mm/numa_emulation.c | 14 +-------------
 3 files changed, 25 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index 2dab1ada96cf..7017d540894a 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -72,6 +72,8 @@ void debug_cpumask_set_cpu(int cpu, int node, bool enable);
 
 #ifdef CONFIG_NUMA_EMU
 int numa_emu_cmdline(char *str);
+void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys,
+					unsigned int nr_emu_nids);
 #else /* CONFIG_NUMA_EMU */
 static inline int numa_emu_cmdline(char *str)
 {
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index cfe7e5477cf8..9180d524cfe4 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -848,6 +848,28 @@ EXPORT_SYMBOL(cpumask_of_node);
 
 #endif	/* !CONFIG_DEBUG_PER_CPU_MAPS */
 
+#ifdef CONFIG_NUMA_EMU
+void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys,
+					unsigned int nr_emu_nids)
+{
+	int i, j;
+
+	/*
+	 * Transform __apicid_to_node table to use emulated nids by
+	 * reverse-mapping phys_nid.  The maps should always exist but fall
+	 * back to zero just in case.
+	 */
+	for (i = 0; i < ARRAY_SIZE(__apicid_to_node); i++) {
+		if (__apicid_to_node[i] == NUMA_NO_NODE)
+			continue;
+		for (j = 0; j < nr_emu_nids; j++)
+			if (__apicid_to_node[i] == emu_nid_to_phys[j])
+				break;
+		__apicid_to_node[i] = j < nr_emu_nids ? j : 0;
+	}
+}
+#endif /* CONFIG_NUMA_EMU */
+
 #ifdef CONFIG_NUMA_KEEP_MEMINFO
 static int meminfo_to_nid(struct numa_meminfo *mi, u64 start)
 {
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index 439804e21962..f2746e52ab93 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -476,19 +476,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 		    ei.blk[i].nid != NUMA_NO_NODE)
 			node_set(ei.blk[i].nid, numa_nodes_parsed);
 
-	/*
-	 * Transform __apicid_to_node table to use emulated nids by
-	 * reverse-mapping phys_nid.  The maps should always exist but fall
-	 * back to zero just in case.
-	 */
-	for (i = 0; i < ARRAY_SIZE(__apicid_to_node); i++) {
-		if (__apicid_to_node[i] == NUMA_NO_NODE)
-			continue;
-		for (j = 0; j < ARRAY_SIZE(emu_nid_to_phys); j++)
-			if (__apicid_to_node[i] == emu_nid_to_phys[j])
-				break;
-		__apicid_to_node[i] = j < ARRAY_SIZE(emu_nid_to_phys) ? j : 0;
-	}
+	numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys));
 
 	/* make sure all emulated nodes are mapped to a physical node */
 	for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++)
-- 
2.43.0

[PATCH v2 15/25] x86/numa_emu: use a helper function to get MAX_DMA32_PFN

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

This is required to make numa emulation code architecture independent so
that it can be moved to generic code in following commits.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/x86/include/asm/numa.h  | 1 +
 arch/x86/mm/numa.c           | 5 +++++
 arch/x86/mm/numa_emulation.c | 4 ++--
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index 7017d540894a..b22c85c1ef18 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -74,6 +74,7 @@ void debug_cpumask_set_cpu(int cpu, int node, bool enable);
 int numa_emu_cmdline(char *str);
 void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys,
 					unsigned int nr_emu_nids);
+u64 __init numa_emu_dma_end(void);
 #else /* CONFIG_NUMA_EMU */
 static inline int numa_emu_cmdline(char *str)
 {
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 9180d524cfe4..8b7c6580d268 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -868,6 +868,11 @@ void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys,
 		__apicid_to_node[i] = j < nr_emu_nids ? j : 0;
 	}
 }
+
+u64 __init numa_emu_dma_end(void)
+{
+	return PFN_PHYS(MAX_DMA32_PFN);
+}
 #endif /* CONFIG_NUMA_EMU */
 
 #ifdef CONFIG_NUMA_KEEP_MEMINFO
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index f2746e52ab93..fb4814497446 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -128,7 +128,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 	 */
 	while (!nodes_empty(physnode_mask)) {
 		for_each_node_mask(i, physnode_mask) {
-			u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN);
+			u64 dma32_end = numa_emu_dma_end();
 			u64 start, limit, end;
 			int phys_blk;
 
@@ -275,7 +275,7 @@ static int __init split_nodes_size_interleave_uniform(struct numa_meminfo *ei,
 	 */
 	while (!nodes_empty(physnode_mask)) {
 		for_each_node_mask(i, physnode_mask) {
-			u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN);
+			u64 dma32_end = numa_emu_dma_end();
 			u64 start, limit, end;
 			int phys_blk;
 
-- 
2.43.0

[PATCH v2 16/25] x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

CPU id cannot be negative.

Making it unsigned also aligns with declarations in
include/asm-generic/numa.h used by arm64 and riscv and allows sharing
numa emulation code with these architectures.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/x86/include/asm/numa.h  | 10 +++++-----
 arch/x86/mm/numa.c           | 10 +++++-----
 arch/x86/mm/numa_emulation.c | 10 +++++-----
 3 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index b22c85c1ef18..6fa5ea925aac 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -54,20 +54,20 @@ static inline int numa_cpu_node(int cpu)
 extern void numa_set_node(int cpu, int node);
 extern void numa_clear_node(int cpu);
 extern void __init init_cpu_to_node(void);
-extern void numa_add_cpu(int cpu);
-extern void numa_remove_cpu(int cpu);
+extern void numa_add_cpu(unsigned int cpu);
+extern void numa_remove_cpu(unsigned int cpu);
 extern void init_gi_nodes(void);
 #else	/* CONFIG_NUMA */
 static inline void numa_set_node(int cpu, int node)	{ }
 static inline void numa_clear_node(int cpu)		{ }
 static inline void init_cpu_to_node(void)		{ }
-static inline void numa_add_cpu(int cpu)		{ }
-static inline void numa_remove_cpu(int cpu)		{ }
+static inline void numa_add_cpu(unsigned int cpu)	{ }
+static inline void numa_remove_cpu(unsigned int cpu)	{ }
 static inline void init_gi_nodes(void)			{ }
 #endif	/* CONFIG_NUMA */
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
-void debug_cpumask_set_cpu(int cpu, int node, bool enable);
+void debug_cpumask_set_cpu(unsigned int cpu, int node, bool enable);
 #endif
 
 #ifdef CONFIG_NUMA_EMU
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 8b7c6580d268..cf7b95125d2a 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -737,12 +737,12 @@ void __init init_cpu_to_node(void)
 #ifndef CONFIG_DEBUG_PER_CPU_MAPS
 
 # ifndef CONFIG_NUMA_EMU
-void numa_add_cpu(int cpu)
+void numa_add_cpu(unsigned int cpu)
 {
 	cpumask_set_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
 }
 
-void numa_remove_cpu(int cpu)
+void numa_remove_cpu(unsigned int cpu)
 {
 	cpumask_clear_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
 }
@@ -780,7 +780,7 @@ int early_cpu_to_node(int cpu)
 	return per_cpu(x86_cpu_to_node_map, cpu);
 }
 
-void debug_cpumask_set_cpu(int cpu, int node, bool enable)
+void debug_cpumask_set_cpu(unsigned int cpu, int node, bool enable)
 {
 	struct cpumask *mask;
 
@@ -812,12 +812,12 @@ static void numa_set_cpumask(int cpu, bool enable)
 	debug_cpumask_set_cpu(cpu, early_cpu_to_node(cpu), enable);
 }
 
-void numa_add_cpu(int cpu)
+void numa_add_cpu(unsigned int cpu)
 {
 	numa_set_cpumask(cpu, true);
 }
 
-void numa_remove_cpu(int cpu)
+void numa_remove_cpu(unsigned int cpu)
 {
 	numa_set_cpumask(cpu, false);
 }
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index fb4814497446..235f8a4eb2fa 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -514,7 +514,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 }
 
 #ifndef CONFIG_DEBUG_PER_CPU_MAPS
-void numa_add_cpu(int cpu)
+void numa_add_cpu(unsigned int cpu)
 {
 	int physnid, nid;
 
@@ -532,7 +532,7 @@ void numa_add_cpu(int cpu)
 			cpumask_set_cpu(cpu, node_to_cpumask_map[nid]);
 }
 
-void numa_remove_cpu(int cpu)
+void numa_remove_cpu(unsigned int cpu)
 {
 	int i;
 
@@ -540,7 +540,7 @@ void numa_remove_cpu(int cpu)
 		cpumask_clear_cpu(cpu, node_to_cpumask_map[i]);
 }
 #else	/* !CONFIG_DEBUG_PER_CPU_MAPS */
-static void numa_set_cpumask(int cpu, bool enable)
+static void numa_set_cpumask(unsigned int cpu, bool enable)
 {
 	int nid, physnid;
 
@@ -560,12 +560,12 @@ static void numa_set_cpumask(int cpu, bool enable)
 	}
 }
 
-void numa_add_cpu(int cpu)
+void numa_add_cpu(unsigned int cpu)
 {
 	numa_set_cpumask(cpu, true);
 }
 
-void numa_remove_cpu(int cpu)
+void numa_remove_cpu(unsigned int cpu)
 {
 	numa_set_cpumask(cpu, false);
 }
-- 
2.43.0

[PATCH v2 17/25] mm: introduce numa_memblks

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Move code dealing with numa_memblks from arch/x86 to mm/ and add Kconfig
options to let x86 select it in its Kconfig.

This code will be later reused by arch_numa.

No functional changes.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/x86/Kconfig             |   1 +
 arch/x86/include/asm/numa.h  |   3 -
 arch/x86/mm/amdtopology.c    |   1 +
 arch/x86/mm/numa.c           | 372 +--------------------------------
 arch/x86/mm/numa_emulation.c |   1 +
 arch/x86/mm/numa_internal.h  |  15 +-
 drivers/acpi/numa/srat.c     |   1 +
 drivers/of/of_numa.c         |   1 +
 include/linux/numa_memblks.h |  35 ++++
 mm/Kconfig                   |   3 +
 mm/Makefile                  |   1 +
 mm/numa_memblks.c            | 385 +++++++++++++++++++++++++++++++++++
 12 files changed, 436 insertions(+), 383 deletions(-)
 create mode 100644 include/linux/numa_memblks.h
 create mode 100644 mm/numa_memblks.c

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1d7122a1883e..d8084f37157c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -295,6 +295,7 @@ config X86
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
 	select NEED_PER_CPU_PAGE_FIRST_CHUNK
 	select NEED_SG_DMA_LENGTH
+	select NUMA_MEMBLKS			if NUMA
 	select PCI_DOMAINS			if PCI
 	select PCI_LOCKLESS_CONFIG		if PCI
 	select PERF_EVENTS
diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index 6fa5ea925aac..6e9a50bf03d4 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -10,8 +10,6 @@
 
 #ifdef CONFIG_NUMA
 
-#define NR_NODE_MEMBLKS		(MAX_NUMNODES*2)
-
 extern int numa_off;
 
 /*
@@ -25,7 +23,6 @@ extern int numa_off;
 extern s16 __apicid_to_node[MAX_LOCAL_APIC];
 extern nodemask_t numa_nodes_parsed __initdata;
 
-extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
 extern void __init numa_set_distance(int from, int to, int distance);
 
 static inline void set_apicid_to_node(int apicid, s16 node)
diff --git a/arch/x86/mm/amdtopology.c b/arch/x86/mm/amdtopology.c
index 9332b36a1091..628833afee37 100644
--- a/arch/x86/mm/amdtopology.c
+++ b/arch/x86/mm/amdtopology.c
@@ -12,6 +12,7 @@
 #include <linux/string.h>
 #include <linux/nodemask.h>
 #include <linux/memblock.h>
+#include <linux/numa_memblks.h>
 
 #include <asm/io.h>
 #include <linux/pci_ids.h>
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index cf7b95125d2a..6874d5650b4d 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -13,6 +13,7 @@
 #include <linux/sched.h>
 #include <linux/topology.h>
 #include <linux/sort.h>
+#include <linux/numa_memblks.h>
 
 #include <asm/e820/api.h>
 #include <asm/proto.h>
@@ -22,10 +23,6 @@
 #include "numa_internal.h"
 
 int numa_off;
-nodemask_t numa_nodes_parsed __initdata;
-
-static struct numa_meminfo numa_meminfo __initdata_or_meminfo;
-static struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
 
 static int numa_distance_cnt;
 static u8 *numa_distance;
@@ -121,194 +118,6 @@ void __init setup_node_to_cpumask_map(void)
 	pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids);
 }
 
-static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
-				     struct numa_meminfo *mi)
-{
-	/* ignore zero length blks */
-	if (start == end)
-		return 0;
-
-	/* whine about and ignore invalid blks */
-	if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
-		pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
-			nid, start, end - 1);
-		return 0;
-	}
-
-	if (mi->nr_blks >= NR_NODE_MEMBLKS) {
-		pr_err("too many memblk ranges\n");
-		return -EINVAL;
-	}
-
-	mi->blk[mi->nr_blks].start = start;
-	mi->blk[mi->nr_blks].end = end;
-	mi->blk[mi->nr_blks].nid = nid;
-	mi->nr_blks++;
-	return 0;
-}
-
-/**
- * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
- * @idx: Index of memblk to remove
- * @mi: numa_meminfo to remove memblk from
- *
- * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
- * decrementing @mi->nr_blks.
- */
-void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
-{
-	mi->nr_blks--;
-	memmove(&mi->blk[idx], &mi->blk[idx + 1],
-		(mi->nr_blks - idx) * sizeof(mi->blk[0]));
-}
-
-/**
- * numa_move_tail_memblk - Move a numa_memblk from one numa_meminfo to another
- * @dst: numa_meminfo to append block to
- * @idx: Index of memblk to remove
- * @src: numa_meminfo to remove memblk from
- */
-static void __init numa_move_tail_memblk(struct numa_meminfo *dst, int idx,
-					 struct numa_meminfo *src)
-{
-	dst->blk[dst->nr_blks++] = src->blk[idx];
-	numa_remove_memblk_from(idx, src);
-}
-
-/**
- * numa_add_memblk - Add one numa_memblk to numa_meminfo
- * @nid: NUMA node ID of the new memblk
- * @start: Start address of the new memblk
- * @end: End address of the new memblk
- *
- * Add a new memblk to the default numa_meminfo.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-int __init numa_add_memblk(int nid, u64 start, u64 end)
-{
-	return numa_add_memblk_to(nid, start, end, &numa_meminfo);
-}
-
-/**
- * numa_cleanup_meminfo - Cleanup a numa_meminfo
- * @mi: numa_meminfo to clean up
- *
- * Sanitize @mi by merging and removing unnecessary memblks.  Also check for
- * conflicts and clear unused memblks.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
-{
-	const u64 low = 0;
-	const u64 high = PFN_PHYS(max_pfn);
-	int i, j, k;
-
-	/* first, trim all entries */
-	for (i = 0; i < mi->nr_blks; i++) {
-		struct numa_memblk *bi = &mi->blk[i];
-
-		/* move / save reserved memory ranges */
-		if (!memblock_overlaps_region(&memblock.memory,
-					bi->start, bi->end - bi->start)) {
-			numa_move_tail_memblk(&numa_reserved_meminfo, i--, mi);
-			continue;
-		}
-
-		/* make sure all non-reserved blocks are inside the limits */
-		bi->start = max(bi->start, low);
-
-		/* preserve info for non-RAM areas above 'max_pfn': */
-		if (bi->end > high) {
-			numa_add_memblk_to(bi->nid, high, bi->end,
-					   &numa_reserved_meminfo);
-			bi->end = high;
-		}
-
-		/* and there's no empty block */
-		if (bi->start >= bi->end)
-			numa_remove_memblk_from(i--, mi);
-	}
-
-	/* merge neighboring / overlapping entries */
-	for (i = 0; i < mi->nr_blks; i++) {
-		struct numa_memblk *bi = &mi->blk[i];
-
-		for (j = i + 1; j < mi->nr_blks; j++) {
-			struct numa_memblk *bj = &mi->blk[j];
-			u64 start, end;
-
-			/*
-			 * See whether there are overlapping blocks.  Whine
-			 * about but allow overlaps of the same nid.  They
-			 * will be merged below.
-			 */
-			if (bi->end > bj->start && bi->start < bj->end) {
-				if (bi->nid != bj->nid) {
-					pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
-					       bi->nid, bi->start, bi->end - 1,
-					       bj->nid, bj->start, bj->end - 1);
-					return -EINVAL;
-				}
-				pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
-					bi->nid, bi->start, bi->end - 1,
-					bj->start, bj->end - 1);
-			}
-
-			/*
-			 * Join together blocks on the same node, holes
-			 * between which don't overlap with memory on other
-			 * nodes.
-			 */
-			if (bi->nid != bj->nid)
-				continue;
-			start = min(bi->start, bj->start);
-			end = max(bi->end, bj->end);
-			for (k = 0; k < mi->nr_blks; k++) {
-				struct numa_memblk *bk = &mi->blk[k];
-
-				if (bi->nid == bk->nid)
-					continue;
-				if (start < bk->end && end > bk->start)
-					break;
-			}
-			if (k < mi->nr_blks)
-				continue;
-			printk(KERN_INFO "NUMA: Node %d [mem %#010Lx-%#010Lx] + [mem %#010Lx-%#010Lx] -> [mem %#010Lx-%#010Lx]\n",
-			       bi->nid, bi->start, bi->end - 1, bj->start,
-			       bj->end - 1, start, end - 1);
-			bi->start = start;
-			bi->end = end;
-			numa_remove_memblk_from(j--, mi);
-		}
-	}
-
-	/* clear unused ones */
-	for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
-		mi->blk[i].start = mi->blk[i].end = 0;
-		mi->blk[i].nid = NUMA_NO_NODE;
-	}
-
-	return 0;
-}
-
-/*
- * Set nodes, which have memory in @mi, in *@nodemask.
- */
-static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
-					      const struct numa_meminfo *mi)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
-		if (mi->blk[i].start != mi->blk[i].end &&
-		    mi->blk[i].nid != NUMA_NO_NODE)
-			node_set(mi->blk[i].nid, *nodemask);
-}
-
 /**
  * numa_reset_distance - Reset NUMA distance table
  *
@@ -410,111 +219,13 @@ int __node_distance(int from, int to)
 }
 EXPORT_SYMBOL(__node_distance);
 
-/*
- * Mark all currently memblock-reserved physical memory (which covers the
- * kernel's own memory ranges) as hot-unswappable.
- */
-static void __init numa_clear_kernel_node_hotplug(void)
-{
-	nodemask_t reserved_nodemask = NODE_MASK_NONE;
-	struct memblock_region *mb_region;
-	int i;
-
-	/*
-	 * We have to do some preprocessing of memblock regions, to
-	 * make them suitable for reservation.
-	 *
-	 * At this time, all memory regions reserved by memblock are
-	 * used by the kernel, but those regions are not split up
-	 * along node boundaries yet, and don't necessarily have their
-	 * node ID set yet either.
-	 *
-	 * So iterate over all memory known to the x86 architecture,
-	 * and use those ranges to set the nid in memblock.reserved.
-	 * This will split up the memblock regions along node
-	 * boundaries and will set the node IDs as well.
-	 */
-	for (i = 0; i < numa_meminfo.nr_blks; i++) {
-		struct numa_memblk *mb = numa_meminfo.blk + i;
-		int ret;
-
-		ret = memblock_set_node(mb->start, mb->end - mb->start, &memblock.reserved, mb->nid);
-		WARN_ON_ONCE(ret);
-	}
-
-	/*
-	 * Now go over all reserved memblock regions, to construct a
-	 * node mask of all kernel reserved memory areas.
-	 *
-	 * [ Note, when booting with mem=nn[kMG] or in a kdump kernel,
-	 *   numa_meminfo might not include all memblock.reserved
-	 *   memory ranges, because quirks such as trim_snb_memory()
-	 *   reserve specific pages for Sandy Bridge graphics. ]
-	 */
-	for_each_reserved_mem_region(mb_region) {
-		int nid = memblock_get_region_node(mb_region);
-
-		if (nid != NUMA_NO_NODE)
-			node_set(nid, reserved_nodemask);
-	}
-
-	/*
-	 * Finally, clear the MEMBLOCK_HOTPLUG flag for all memory
-	 * belonging to the reserved node mask.
-	 *
-	 * Note that this will include memory regions that reside
-	 * on nodes that contain kernel memory - entire nodes
-	 * become hot-unpluggable:
-	 */
-	for (i = 0; i < numa_meminfo.nr_blks; i++) {
-		struct numa_memblk *mb = numa_meminfo.blk + i;
-
-		if (!node_isset(mb->nid, reserved_nodemask))
-			continue;
-
-		memblock_clear_hotplug(mb->start, mb->end - mb->start);
-	}
-}
-
 static int __init numa_register_memblks(struct numa_meminfo *mi)
 {
-	int i, nid;
+	int nid, err;
 
-	/* Account for nodes with cpus and no memory */
-	node_possible_map = numa_nodes_parsed;
-	numa_nodemask_from_meminfo(&node_possible_map, mi);
-	if (WARN_ON(nodes_empty(node_possible_map)))
-		return -EINVAL;
-
-	for (i = 0; i < mi->nr_blks; i++) {
-		struct numa_memblk *mb = &mi->blk[i];
-		memblock_set_node(mb->start, mb->end - mb->start,
-				  &memblock.memory, mb->nid);
-	}
-
-	/*
-	 * At very early time, the kernel have to use some memory such as
-	 * loading the kernel image. We cannot prevent this anyway. So any
-	 * node the kernel resides in should be un-hotpluggable.
-	 *
-	 * And when we come here, alloc node data won't fail.
-	 */
-	numa_clear_kernel_node_hotplug();
-
-	/*
-	 * If sections array is gonna be used for pfn -> nid mapping, check
-	 * whether its granularity is fine enough.
-	 */
-	if (IS_ENABLED(NODE_NOT_IN_PAGE_FLAGS)) {
-		unsigned long pfn_align = node_map_pfn_alignment();
-
-		if (pfn_align && pfn_align < PAGES_PER_SECTION) {
-			pr_warn("Node alignment %LuMB < min %LuMB, rejecting NUMA config\n",
-				PFN_PHYS(pfn_align) >> 20,
-				PFN_PHYS(PAGES_PER_SECTION) >> 20);
-			return -EINVAL;
-		}
-	}
+	err = numa_register_meminfo(mi);
+	if (err)
+		return err;
 
 	if (!memblock_validate_numa_coverage(SZ_1M))
 		return -EINVAL;
@@ -912,76 +623,3 @@ int memory_add_physaddr_to_nid(u64 start)
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 
 #endif
-
-static int __init cmp_memblk(const void *a, const void *b)
-{
-	const struct numa_memblk *ma = *(const struct numa_memblk **)a;
-	const struct numa_memblk *mb = *(const struct numa_memblk **)b;
-
-	return (ma->start > mb->start) - (ma->start < mb->start);
-}
-
-static struct numa_memblk *numa_memblk_list[NR_NODE_MEMBLKS] __initdata;
-
-/**
- * numa_fill_memblks - Fill gaps in numa_meminfo memblks
- * @start: address to begin fill
- * @end: address to end fill
- *
- * Find and extend numa_meminfo memblks to cover the physical
- * address range @start-@end
- *
- * RETURNS:
- * 0		  : Success
- * NUMA_NO_MEMBLK : No memblks exist in address range @start-@end
- */
-
-int __init numa_fill_memblks(u64 start, u64 end)
-{
-	struct numa_memblk **blk = &numa_memblk_list[0];
-	struct numa_meminfo *mi = &numa_meminfo;
-	int count = 0;
-	u64 prev_end;
-
-	/*
-	 * Create a list of pointers to numa_meminfo memblks that
-	 * overlap start, end. The list is used to make in-place
-	 * changes that fill out the numa_meminfo memblks.
-	 */
-	for (int i = 0; i < mi->nr_blks; i++) {
-		struct numa_memblk *bi = &mi->blk[i];
-
-		if (memblock_addrs_overlap(start, end - start, bi->start,
-					   bi->end - bi->start)) {
-			blk[count] = &mi->blk[i];
-			count++;
-		}
-	}
-	if (!count)
-		return NUMA_NO_MEMBLK;
-
-	/* Sort the list of pointers in memblk->start order */
-	sort(&blk[0], count, sizeof(blk[0]), cmp_memblk, NULL);
-
-	/* Make sure the first/last memblks include start/end */
-	blk[0]->start = min(blk[0]->start, start);
-	blk[count - 1]->end = max(blk[count - 1]->end, end);
-
-	/*
-	 * Fill any gaps by tracking the previous memblks
-	 * end address and backfilling to it if needed.
-	 */
-	prev_end = blk[0]->end;
-	for (int i = 1; i < count; i++) {
-		struct numa_memblk *curr = blk[i];
-
-		if (prev_end >= curr->start) {
-			if (prev_end < curr->end)
-				prev_end = curr->end;
-		} else {
-			curr->start = prev_end;
-			prev_end = curr->end;
-		}
-	}
-	return 0;
-}
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index 235f8a4eb2fa..33610026b7a3 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -6,6 +6,7 @@
 #include <linux/errno.h>
 #include <linux/topology.h>
 #include <linux/memblock.h>
+#include <linux/numa_memblks.h>
 #include <asm/dma.h>
 
 #include "numa_internal.h"
diff --git a/arch/x86/mm/numa_internal.h b/arch/x86/mm/numa_internal.h
index 86860f279662..a51229a2f5af 100644
--- a/arch/x86/mm/numa_internal.h
+++ b/arch/x86/mm/numa_internal.h
@@ -5,23 +5,12 @@
 #include <linux/types.h>
 #include <asm/numa.h>
 
-struct numa_memblk {
-	u64			start;
-	u64			end;
-	int			nid;
-};
-
-struct numa_meminfo {
-	int			nr_blks;
-	struct numa_memblk	blk[NR_NODE_MEMBLKS];
-};
-
-void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi);
-int __init numa_cleanup_meminfo(struct numa_meminfo *mi);
 void __init numa_reset_distance(void);
 
 void __init x86_numa_init(void);
 
+struct numa_meminfo;
+
 #ifdef CONFIG_NUMA_EMU
 void __init numa_emulation(struct numa_meminfo *numa_meminfo,
 			   int numa_dist_cnt);
diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
index e3f26e71637a..6f2983cbe553 100644
--- a/drivers/acpi/numa/srat.c
+++ b/drivers/acpi/numa/srat.c
@@ -17,6 +17,7 @@
 #include <linux/numa.h>
 #include <linux/nodemask.h>
 #include <linux/topology.h>
+#include <linux/numa_memblks.h>
 
 static nodemask_t nodes_found_map = NODE_MASK_NONE;
 
diff --git a/drivers/of/of_numa.c b/drivers/of/of_numa.c
index 5949829a1b00..838747e319a2 100644
--- a/drivers/of/of_numa.c
+++ b/drivers/of/of_numa.c
@@ -10,6 +10,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/nodemask.h>
+#include <linux/numa_memblks.h>
 
 #include <asm/numa.h>
 
diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h
new file mode 100644
index 000000000000..6981cf97d2c9
--- /dev/null
+++ b/include/linux/numa_memblks.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __NUMA_MEMBLKS_H
+#define __NUMA_MEMBLKS_H
+
+#ifdef CONFIG_NUMA_MEMBLKS
+#include <linux/types.h>
+
+#define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
+
+struct numa_memblk {
+	u64			start;
+	u64			end;
+	int			nid;
+};
+
+struct numa_meminfo {
+	int			nr_blks;
+	struct numa_memblk	blk[NR_NODE_MEMBLKS];
+};
+
+extern struct numa_meminfo numa_meminfo __initdata_or_meminfo;
+extern struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
+
+int __init numa_add_memblk(int nodeid, u64 start, u64 end);
+void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi);
+
+int __init numa_cleanup_meminfo(struct numa_meminfo *mi);
+int __init numa_register_meminfo(struct numa_meminfo *mi);
+
+void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
+				       const struct numa_meminfo *mi);
+
+#endif /* CONFIG_NUMA_MEMBLKS */
+
+#endif	/* __NUMA_MEMBLKS_H */
diff --git a/mm/Kconfig b/mm/Kconfig
index b4cb45255a54..15c6efbaa1df 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -1249,6 +1249,9 @@ config IOMMU_MM_DATA
 config EXECMEM
 	bool
 
+config NUMA_MEMBLKS
+	bool
+
 source "mm/damon/Kconfig"
 
 endmenu
diff --git a/mm/Makefile b/mm/Makefile
index 773b3b267438..17bc4013a2c5 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -140,3 +140,4 @@ obj-$(CONFIG_GENERIC_IOREMAP) += ioremap.o
 obj-$(CONFIG_SHRINKER_DEBUG) += shrinker_debug.o
 obj-$(CONFIG_EXECMEM) += execmem.o
 obj-$(CONFIG_NUMA) += numa.o
+obj-$(CONFIG_NUMA_MEMBLKS) += numa_memblks.o
diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c
new file mode 100644
index 000000000000..72f191a94c66
--- /dev/null
+++ b/mm/numa_memblks.c
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/array_size.h>
+#include <linux/sort.h>
+#include <linux/printk.h>
+#include <linux/memblock.h>
+#include <linux/numa.h>
+#include <linux/numa_memblks.h>
+
+nodemask_t numa_nodes_parsed __initdata;
+
+struct numa_meminfo numa_meminfo __initdata_or_meminfo;
+struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
+
+static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
+				     struct numa_meminfo *mi)
+{
+	/* ignore zero length blks */
+	if (start == end)
+		return 0;
+
+	/* whine about and ignore invalid blks */
+	if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
+		pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
+			nid, start, end - 1);
+		return 0;
+	}
+
+	if (mi->nr_blks >= NR_NODE_MEMBLKS) {
+		pr_err("too many memblk ranges\n");
+		return -EINVAL;
+	}
+
+	mi->blk[mi->nr_blks].start = start;
+	mi->blk[mi->nr_blks].end = end;
+	mi->blk[mi->nr_blks].nid = nid;
+	mi->nr_blks++;
+	return 0;
+}
+
+/**
+ * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
+ * @idx: Index of memblk to remove
+ * @mi: numa_meminfo to remove memblk from
+ *
+ * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
+ * decrementing @mi->nr_blks.
+ */
+void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
+{
+	mi->nr_blks--;
+	memmove(&mi->blk[idx], &mi->blk[idx + 1],
+		(mi->nr_blks - idx) * sizeof(mi->blk[0]));
+}
+
+/**
+ * numa_move_tail_memblk - Move a numa_memblk from one numa_meminfo to another
+ * @dst: numa_meminfo to append block to
+ * @idx: Index of memblk to remove
+ * @src: numa_meminfo to remove memblk from
+ */
+static void __init numa_move_tail_memblk(struct numa_meminfo *dst, int idx,
+					 struct numa_meminfo *src)
+{
+	dst->blk[dst->nr_blks++] = src->blk[idx];
+	numa_remove_memblk_from(idx, src);
+}
+
+/**
+ * numa_add_memblk - Add one numa_memblk to numa_meminfo
+ * @nid: NUMA node ID of the new memblk
+ * @start: Start address of the new memblk
+ * @end: End address of the new memblk
+ *
+ * Add a new memblk to the default numa_meminfo.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init numa_add_memblk(int nid, u64 start, u64 end)
+{
+	return numa_add_memblk_to(nid, start, end, &numa_meminfo);
+}
+
+/**
+ * numa_cleanup_meminfo - Cleanup a numa_meminfo
+ * @mi: numa_meminfo to clean up
+ *
+ * Sanitize @mi by merging and removing unnecessary memblks.  Also check for
+ * conflicts and clear unused memblks.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
+{
+	const u64 low = 0;
+	const u64 high = PFN_PHYS(max_pfn);
+	int i, j, k;
+
+	/* first, trim all entries */
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *bi = &mi->blk[i];
+
+		/* move / save reserved memory ranges */
+		if (!memblock_overlaps_region(&memblock.memory,
+					bi->start, bi->end - bi->start)) {
+			numa_move_tail_memblk(&numa_reserved_meminfo, i--, mi);
+			continue;
+		}
+
+		/* make sure all non-reserved blocks are inside the limits */
+		bi->start = max(bi->start, low);
+
+		/* preserve info for non-RAM areas above 'max_pfn': */
+		if (bi->end > high) {
+			numa_add_memblk_to(bi->nid, high, bi->end,
+					   &numa_reserved_meminfo);
+			bi->end = high;
+		}
+
+		/* and there's no empty block */
+		if (bi->start >= bi->end)
+			numa_remove_memblk_from(i--, mi);
+	}
+
+	/* merge neighboring / overlapping entries */
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *bi = &mi->blk[i];
+
+		for (j = i + 1; j < mi->nr_blks; j++) {
+			struct numa_memblk *bj = &mi->blk[j];
+			u64 start, end;
+
+			/*
+			 * See whether there are overlapping blocks.  Whine
+			 * about but allow overlaps of the same nid.  They
+			 * will be merged below.
+			 */
+			if (bi->end > bj->start && bi->start < bj->end) {
+				if (bi->nid != bj->nid) {
+					pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
+					       bi->nid, bi->start, bi->end - 1,
+					       bj->nid, bj->start, bj->end - 1);
+					return -EINVAL;
+				}
+				pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
+					bi->nid, bi->start, bi->end - 1,
+					bj->start, bj->end - 1);
+			}
+
+			/*
+			 * Join together blocks on the same node, holes
+			 * between which don't overlap with memory on other
+			 * nodes.
+			 */
+			if (bi->nid != bj->nid)
+				continue;
+			start = min(bi->start, bj->start);
+			end = max(bi->end, bj->end);
+			for (k = 0; k < mi->nr_blks; k++) {
+				struct numa_memblk *bk = &mi->blk[k];
+
+				if (bi->nid == bk->nid)
+					continue;
+				if (start < bk->end && end > bk->start)
+					break;
+			}
+			if (k < mi->nr_blks)
+				continue;
+			pr_info("NUMA: Node %d [mem %#010Lx-%#010Lx] + [mem %#010Lx-%#010Lx] -> [mem %#010Lx-%#010Lx]\n",
+			       bi->nid, bi->start, bi->end - 1, bj->start,
+			       bj->end - 1, start, end - 1);
+			bi->start = start;
+			bi->end = end;
+			numa_remove_memblk_from(j--, mi);
+		}
+	}
+
+	/* clear unused ones */
+	for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
+		mi->blk[i].start = mi->blk[i].end = 0;
+		mi->blk[i].nid = NUMA_NO_NODE;
+	}
+
+	return 0;
+}
+
+/*
+ * Set nodes, which have memory in @mi, in *@nodemask.
+ */
+void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
+				       const struct numa_meminfo *mi)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
+		if (mi->blk[i].start != mi->blk[i].end &&
+		    mi->blk[i].nid != NUMA_NO_NODE)
+			node_set(mi->blk[i].nid, *nodemask);
+}
+
+/*
+ * Mark all currently memblock-reserved physical memory (which covers the
+ * kernel's own memory ranges) as hot-unswappable.
+ */
+static void __init numa_clear_kernel_node_hotplug(void)
+{
+	nodemask_t reserved_nodemask = NODE_MASK_NONE;
+	struct memblock_region *mb_region;
+	int i;
+
+	/*
+	 * We have to do some preprocessing of memblock regions, to
+	 * make them suitable for reservation.
+	 *
+	 * At this time, all memory regions reserved by memblock are
+	 * used by the kernel, but those regions are not split up
+	 * along node boundaries yet, and don't necessarily have their
+	 * node ID set yet either.
+	 *
+	 * So iterate over all parsed memory blocks and use those ranges to
+	 * set the nid in memblock.reserved.  This will split up the
+	 * memblock regions along node boundaries and will set the node IDs
+	 * as well.
+	 */
+	for (i = 0; i < numa_meminfo.nr_blks; i++) {
+		struct numa_memblk *mb = numa_meminfo.blk + i;
+		int ret;
+
+		ret = memblock_set_node(mb->start, mb->end - mb->start,
+					&memblock.reserved, mb->nid);
+		WARN_ON_ONCE(ret);
+	}
+
+	/*
+	 * Now go over all reserved memblock regions, to construct a
+	 * node mask of all kernel reserved memory areas.
+	 *
+	 * [ Note, when booting with mem=nn[kMG] or in a kdump kernel,
+	 *   numa_meminfo might not include all memblock.reserved
+	 *   memory ranges, because quirks such as trim_snb_memory()
+	 *   reserve specific pages for Sandy Bridge graphics. ]
+	 */
+	for_each_reserved_mem_region(mb_region) {
+		int nid = memblock_get_region_node(mb_region);
+
+		if (nid != MAX_NUMNODES)
+			node_set(nid, reserved_nodemask);
+	}
+
+	/*
+	 * Finally, clear the MEMBLOCK_HOTPLUG flag for all memory
+	 * belonging to the reserved node mask.
+	 *
+	 * Note that this will include memory regions that reside
+	 * on nodes that contain kernel memory - entire nodes
+	 * become hot-unpluggable:
+	 */
+	for (i = 0; i < numa_meminfo.nr_blks; i++) {
+		struct numa_memblk *mb = numa_meminfo.blk + i;
+
+		if (!node_isset(mb->nid, reserved_nodemask))
+			continue;
+
+		memblock_clear_hotplug(mb->start, mb->end - mb->start);
+	}
+}
+
+int __init numa_register_meminfo(struct numa_meminfo *mi)
+{
+	int i;
+
+	/* Account for nodes with cpus and no memory */
+	node_possible_map = numa_nodes_parsed;
+	numa_nodemask_from_meminfo(&node_possible_map, mi);
+	if (WARN_ON(nodes_empty(node_possible_map)))
+		return -EINVAL;
+
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *mb = &mi->blk[i];
+
+		memblock_set_node(mb->start, mb->end - mb->start,
+				  &memblock.memory, mb->nid);
+	}
+
+	/*
+	 * At very early time, the kernel have to use some memory such as
+	 * loading the kernel image. We cannot prevent this anyway. So any
+	 * node the kernel resides in should be un-hotpluggable.
+	 *
+	 * And when we come here, alloc node data won't fail.
+	 */
+	numa_clear_kernel_node_hotplug();
+
+	/*
+	 * If sections array is gonna be used for pfn -> nid mapping, check
+	 * whether its granularity is fine enough.
+	 */
+	if (IS_ENABLED(NODE_NOT_IN_PAGE_FLAGS)) {
+		unsigned long pfn_align = node_map_pfn_alignment();
+
+		if (pfn_align && pfn_align < PAGES_PER_SECTION) {
+			pr_warn("Node alignment %LuMB < min %LuMB, rejecting NUMA config\n",
+				PFN_PHYS(pfn_align) >> 20,
+				PFN_PHYS(PAGES_PER_SECTION) >> 20);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int __init cmp_memblk(const void *a, const void *b)
+{
+	const struct numa_memblk *ma = *(const struct numa_memblk **)a;
+	const struct numa_memblk *mb = *(const struct numa_memblk **)b;
+
+	return (ma->start > mb->start) - (ma->start < mb->start);
+}
+
+static struct numa_memblk *numa_memblk_list[NR_NODE_MEMBLKS] __initdata;
+
+/**
+ * numa_fill_memblks - Fill gaps in numa_meminfo memblks
+ * @start: address to begin fill
+ * @end: address to end fill
+ *
+ * Find and extend numa_meminfo memblks to cover the physical
+ * address range @start-@end
+ *
+ * RETURNS:
+ * 0		  : Success
+ * NUMA_NO_MEMBLK : No memblks exist in address range @start-@end
+ */
+
+int __init numa_fill_memblks(u64 start, u64 end)
+{
+	struct numa_memblk **blk = &numa_memblk_list[0];
+	struct numa_meminfo *mi = &numa_meminfo;
+	int count = 0;
+	u64 prev_end;
+
+	/*
+	 * Create a list of pointers to numa_meminfo memblks that
+	 * overlap start, end. The list is used to make in-place
+	 * changes that fill out the numa_meminfo memblks.
+	 */
+	for (int i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *bi = &mi->blk[i];
+
+		if (memblock_addrs_overlap(start, end - start, bi->start,
+					   bi->end - bi->start)) {
+			blk[count] = &mi->blk[i];
+			count++;
+		}
+	}
+	if (!count)
+		return NUMA_NO_MEMBLK;
+
+	/* Sort the list of pointers in memblk->start order */
+	sort(&blk[0], count, sizeof(blk[0]), cmp_memblk, NULL);
+
+	/* Make sure the first/last memblks include start/end */
+	blk[0]->start = min(blk[0]->start, start);
+	blk[count - 1]->end = max(blk[count - 1]->end, end);
+
+	/*
+	 * Fill any gaps by tracking the previous memblks
+	 * end address and backfilling to it if needed.
+	 */
+	prev_end = blk[0]->end;
+	for (int i = 1; i < count; i++) {
+		struct numa_memblk *curr = blk[i];
+
+		if (prev_end >= curr->start) {
+			if (prev_end < curr->end)
+				prev_end = curr->end;
+		} else {
+			curr->start = prev_end;
+			prev_end = curr->end;
+		}
+	}
+	return 0;
+}
-- 
2.43.0

[PATCH v2 18/25] mm: move numa_distance and related code from x86 to numa_memblks

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Move code dealing with numa_distance array from arch/x86 to
mm/numa_memblks.c

This code will be later reused by arch_numa.

No functional changes.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/x86/include/asm/numa.h  |   2 -
 arch/x86/mm/numa.c           | 104 -----------------------------------
 arch/x86/mm/numa_internal.h  |   2 -
 include/linux/numa_memblks.h |   4 ++
 mm/numa_memblks.c            | 104 +++++++++++++++++++++++++++++++++++
 5 files changed, 108 insertions(+), 108 deletions(-)

diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index 6e9a50bf03d4..203100500f24 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -23,8 +23,6 @@ extern int numa_off;
 extern s16 __apicid_to_node[MAX_LOCAL_APIC];
 extern nodemask_t numa_nodes_parsed __initdata;
 
-extern void __init numa_set_distance(int from, int to, int distance);
-
 static inline void set_apicid_to_node(int apicid, s16 node)
 {
 	__apicid_to_node[apicid] = node;
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 6874d5650b4d..8eb15578625e 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -24,9 +24,6 @@
 
 int numa_off;
 
-static int numa_distance_cnt;
-static u8 *numa_distance;
-
 static __init int numa_setup(char *opt)
 {
 	if (!opt)
@@ -118,107 +115,6 @@ void __init setup_node_to_cpumask_map(void)
 	pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids);
 }
 
-/**
- * numa_reset_distance - Reset NUMA distance table
- *
- * The current table is freed.  The next numa_set_distance() call will
- * create a new one.
- */
-void __init numa_reset_distance(void)
-{
-	size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
-
-	/* numa_distance could be 1LU marking allocation failure, test cnt */
-	if (numa_distance_cnt)
-		memblock_free(numa_distance, size);
-	numa_distance_cnt = 0;
-	numa_distance = NULL;	/* enable table creation */
-}
-
-static int __init numa_alloc_distance(void)
-{
-	nodemask_t nodes_parsed;
-	size_t size;
-	int i, j, cnt = 0;
-
-	/* size the new table and allocate it */
-	nodes_parsed = numa_nodes_parsed;
-	numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
-
-	for_each_node_mask(i, nodes_parsed)
-		cnt = i;
-	cnt++;
-	size = cnt * cnt * sizeof(numa_distance[0]);
-
-	numa_distance = memblock_alloc(size, PAGE_SIZE);
-	if (!numa_distance) {
-		pr_warn("Warning: can't allocate distance table!\n");
-		/* don't retry until explicitly reset */
-		numa_distance = (void *)1LU;
-		return -ENOMEM;
-	}
-
-	numa_distance_cnt = cnt;
-
-	/* fill with the default distances */
-	for (i = 0; i < cnt; i++)
-		for (j = 0; j < cnt; j++)
-			numa_distance[i * cnt + j] = i == j ?
-				LOCAL_DISTANCE : REMOTE_DISTANCE;
-	printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
-
-	return 0;
-}
-
-/**
- * numa_set_distance - Set NUMA distance from one NUMA to another
- * @from: the 'from' node to set distance
- * @to: the 'to'  node to set distance
- * @distance: NUMA distance
- *
- * Set the distance from node @from to @to to @distance.  If distance table
- * doesn't exist, one which is large enough to accommodate all the currently
- * known nodes will be created.
- *
- * If such table cannot be allocated, a warning is printed and further
- * calls are ignored until the distance table is reset with
- * numa_reset_distance().
- *
- * If @from or @to is higher than the highest known node or lower than zero
- * at the time of table creation or @distance doesn't make sense, the call
- * is ignored.
- * This is to allow simplification of specific NUMA config implementations.
- */
-void __init numa_set_distance(int from, int to, int distance)
-{
-	if (!numa_distance && numa_alloc_distance() < 0)
-		return;
-
-	if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
-			from < 0 || to < 0) {
-		pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
-			     from, to, distance);
-		return;
-	}
-
-	if ((u8)distance != distance ||
-	    (from == to && distance != LOCAL_DISTANCE)) {
-		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
-			     from, to, distance);
-		return;
-	}
-
-	numa_distance[from * numa_distance_cnt + to] = distance;
-}
-
-int __node_distance(int from, int to)
-{
-	if (from >= numa_distance_cnt || to >= numa_distance_cnt)
-		return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
-	return numa_distance[from * numa_distance_cnt + to];
-}
-EXPORT_SYMBOL(__node_distance);
-
 static int __init numa_register_memblks(struct numa_meminfo *mi)
 {
 	int nid, err;
diff --git a/arch/x86/mm/numa_internal.h b/arch/x86/mm/numa_internal.h
index a51229a2f5af..249e3aaeadce 100644
--- a/arch/x86/mm/numa_internal.h
+++ b/arch/x86/mm/numa_internal.h
@@ -5,8 +5,6 @@
 #include <linux/types.h>
 #include <asm/numa.h>
 
-void __init numa_reset_distance(void);
-
 void __init x86_numa_init(void);
 
 struct numa_meminfo;
diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h
index 6981cf97d2c9..968a590535ac 100644
--- a/include/linux/numa_memblks.h
+++ b/include/linux/numa_memblks.h
@@ -7,6 +7,10 @@
 
 #define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
 
+extern int numa_distance_cnt;
+void __init numa_set_distance(int from, int to, int distance);
+void __init numa_reset_distance(void);
+
 struct numa_memblk {
 	u64			start;
 	u64			end;
diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c
index 72f191a94c66..e3c3519725d4 100644
--- a/mm/numa_memblks.c
+++ b/mm/numa_memblks.c
@@ -7,11 +7,115 @@
 #include <linux/numa.h>
 #include <linux/numa_memblks.h>
 
+int numa_distance_cnt;
+static u8 *numa_distance;
+
 nodemask_t numa_nodes_parsed __initdata;
 
 struct numa_meminfo numa_meminfo __initdata_or_meminfo;
 struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
 
+/**
+ * numa_reset_distance - Reset NUMA distance table
+ *
+ * The current table is freed.  The next numa_set_distance() call will
+ * create a new one.
+ */
+void __init numa_reset_distance(void)
+{
+	size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
+
+	/* numa_distance could be 1LU marking allocation failure, test cnt */
+	if (numa_distance_cnt)
+		memblock_free(numa_distance, size);
+	numa_distance_cnt = 0;
+	numa_distance = NULL;	/* enable table creation */
+}
+
+static int __init numa_alloc_distance(void)
+{
+	nodemask_t nodes_parsed;
+	size_t size;
+	int i, j, cnt = 0;
+
+	/* size the new table and allocate it */
+	nodes_parsed = numa_nodes_parsed;
+	numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
+
+	for_each_node_mask(i, nodes_parsed)
+		cnt = i;
+	cnt++;
+	size = cnt * cnt * sizeof(numa_distance[0]);
+
+	numa_distance = memblock_alloc(size, PAGE_SIZE);
+	if (!numa_distance) {
+		pr_warn("Warning: can't allocate distance table!\n");
+		/* don't retry until explicitly reset */
+		numa_distance = (void *)1LU;
+		return -ENOMEM;
+	}
+
+	numa_distance_cnt = cnt;
+
+	/* fill with the default distances */
+	for (i = 0; i < cnt; i++)
+		for (j = 0; j < cnt; j++)
+			numa_distance[i * cnt + j] = i == j ?
+				LOCAL_DISTANCE : REMOTE_DISTANCE;
+	printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
+
+	return 0;
+}
+
+/**
+ * numa_set_distance - Set NUMA distance from one NUMA to another
+ * @from: the 'from' node to set distance
+ * @to: the 'to'  node to set distance
+ * @distance: NUMA distance
+ *
+ * Set the distance from node @from to @to to @distance.  If distance table
+ * doesn't exist, one which is large enough to accommodate all the currently
+ * known nodes will be created.
+ *
+ * If such table cannot be allocated, a warning is printed and further
+ * calls are ignored until the distance table is reset with
+ * numa_reset_distance().
+ *
+ * If @from or @to is higher than the highest known node or lower than zero
+ * at the time of table creation or @distance doesn't make sense, the call
+ * is ignored.
+ * This is to allow simplification of specific NUMA config implementations.
+ */
+void __init numa_set_distance(int from, int to, int distance)
+{
+	if (!numa_distance && numa_alloc_distance() < 0)
+		return;
+
+	if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
+			from < 0 || to < 0) {
+		pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
+			     from, to, distance);
+		return;
+	}
+
+	if ((u8)distance != distance ||
+	    (from == to && distance != LOCAL_DISTANCE)) {
+		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+			     from, to, distance);
+		return;
+	}
+
+	numa_distance[from * numa_distance_cnt + to] = distance;
+}
+
+int __node_distance(int from, int to)
+{
+	if (from >= numa_distance_cnt || to >= numa_distance_cnt)
+		return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
+	return numa_distance[from * numa_distance_cnt + to];
+}
+EXPORT_SYMBOL(__node_distance);
+
 static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
 				     struct numa_meminfo *mi)
 {
-- 
2.43.0

[PATCH v2 19/25] mm: introduce numa_emulation

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Move numa_emulation codfrom arch/x86 to mm/numa_emulation.c

This code will be later reused by arch_numa.

No functional changes.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/x86/Kconfig                     |  8 --------
 arch/x86/include/asm/numa.h          | 12 ------------
 arch/x86/mm/Makefile                 |  1 -
 arch/x86/mm/numa_internal.h          | 11 -----------
 include/linux/numa_memblks.h         | 17 +++++++++++++++++
 mm/Kconfig                           |  8 ++++++++
 mm/Makefile                          |  1 +
 {arch/x86/mm => mm}/numa_emulation.c |  4 +---
 8 files changed, 27 insertions(+), 35 deletions(-)
 rename {arch/x86/mm => mm}/numa_emulation.c (99%)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d8084f37157c..a42735c126fa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1592,14 +1592,6 @@ config X86_64_ACPI_NUMA
 	help
 	  Enable ACPI SRAT based node topology detection.
 
-config NUMA_EMU
-	bool "NUMA emulation"
-	depends on NUMA
-	help
-	  Enable NUMA emulation. A flat machine will be split
-	  into virtual nodes when booted with "numa=fake=N", where N is the
-	  number of nodes. This is only useful for debugging.
-
 config NODES_SHIFT
 	int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
 	range 1 10
diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index 203100500f24..5469d7a7c40f 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -65,16 +65,4 @@ static inline void init_gi_nodes(void)			{ }
 void debug_cpumask_set_cpu(unsigned int cpu, int node, bool enable);
 #endif
 
-#ifdef CONFIG_NUMA_EMU
-int numa_emu_cmdline(char *str);
-void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys,
-					unsigned int nr_emu_nids);
-u64 __init numa_emu_dma_end(void);
-#else /* CONFIG_NUMA_EMU */
-static inline int numa_emu_cmdline(char *str)
-{
-	return -EINVAL;
-}
-#endif /* CONFIG_NUMA_EMU */
-
 #endif	/* _ASM_X86_NUMA_H */
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 8d3a00e5c528..690fbf48e853 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -57,7 +57,6 @@ obj-$(CONFIG_MMIOTRACE_TEST)	+= testmmiotrace.o
 obj-$(CONFIG_NUMA)		+= numa.o numa_$(BITS).o
 obj-$(CONFIG_AMD_NUMA)		+= amdtopology.o
 obj-$(CONFIG_ACPI_NUMA)		+= srat.o
-obj-$(CONFIG_NUMA_EMU)		+= numa_emulation.o
 
 obj-$(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS)	+= pkeys.o
 obj-$(CONFIG_RANDOMIZE_MEMORY)			+= kaslr.o
diff --git a/arch/x86/mm/numa_internal.h b/arch/x86/mm/numa_internal.h
index 249e3aaeadce..11e1ff370c10 100644
--- a/arch/x86/mm/numa_internal.h
+++ b/arch/x86/mm/numa_internal.h
@@ -7,15 +7,4 @@
 
 void __init x86_numa_init(void);
 
-struct numa_meminfo;
-
-#ifdef CONFIG_NUMA_EMU
-void __init numa_emulation(struct numa_meminfo *numa_meminfo,
-			   int numa_dist_cnt);
-#else
-static inline void numa_emulation(struct numa_meminfo *numa_meminfo,
-				  int numa_dist_cnt)
-{ }
-#endif
-
 #endif	/* __X86_MM_NUMA_INTERNAL_H */
diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h
index 968a590535ac..f81f98678074 100644
--- a/include/linux/numa_memblks.h
+++ b/include/linux/numa_memblks.h
@@ -34,6 +34,23 @@ int __init numa_register_meminfo(struct numa_meminfo *mi);
 void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
 				       const struct numa_meminfo *mi);
 
+#ifdef CONFIG_NUMA_EMU
+int numa_emu_cmdline(char *str);
+void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys,
+					unsigned int nr_emu_nids);
+u64 __init numa_emu_dma_end(void);
+void __init numa_emulation(struct numa_meminfo *numa_meminfo,
+			   int numa_dist_cnt);
+#else
+static inline void numa_emulation(struct numa_meminfo *numa_meminfo,
+				  int numa_dist_cnt)
+{ }
+static inline int numa_emu_cmdline(char *str)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_NUMA_EMU */
+
 #endif /* CONFIG_NUMA_MEMBLKS */
 
 #endif	/* __NUMA_MEMBLKS_H */
diff --git a/mm/Kconfig b/mm/Kconfig
index 15c6efbaa1df..ae58eecdefdc 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -1252,6 +1252,14 @@ config EXECMEM
 config NUMA_MEMBLKS
 	bool
 
+config NUMA_EMU
+	bool "NUMA emulation"
+	depends on NUMA_MEMBLKS
+	help
+	  Enable NUMA emulation. A flat machine will be split
+	  into virtual nodes when booted with "numa=fake=N", where N is the
+	  number of nodes. This is only useful for debugging.
+
 source "mm/damon/Kconfig"
 
 endmenu
diff --git a/mm/Makefile b/mm/Makefile
index 17bc4013a2c5..d5b1b30f76e3 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -141,3 +141,4 @@ obj-$(CONFIG_SHRINKER_DEBUG) += shrinker_debug.o
 obj-$(CONFIG_EXECMEM) += execmem.o
 obj-$(CONFIG_NUMA) += numa.o
 obj-$(CONFIG_NUMA_MEMBLKS) += numa_memblks.o
+obj-$(CONFIG_NUMA_EMU) += numa_emulation.o
diff --git a/arch/x86/mm/numa_emulation.c b/mm/numa_emulation.c
similarity index 99%
rename from arch/x86/mm/numa_emulation.c
rename to mm/numa_emulation.c
index 33610026b7a3..031fb9961bf7 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/mm/numa_emulation.c
@@ -7,9 +7,7 @@
 #include <linux/topology.h>
 #include <linux/memblock.h>
 #include <linux/numa_memblks.h>
-#include <asm/dma.h>
-
-#include "numa_internal.h"
+#include <asm/numa.h>
 
 #define FAKE_NODE_MIN_SIZE	((u64)32 << 20)
 #define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
-- 
2.43.0

[PATCH v2 20/25] mm: numa_memblks: introduce numa_memblks_init

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Move most of x86::numa_init() to numa_memblks so that the latter will be
more self-contained.

With this numa_memblk data structures should not be exposed to the
architecture specific code.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 arch/x86/mm/numa.c           | 40 ++++-------------------------------
 include/linux/numa_memblks.h |  3 +++
 mm/numa_memblks.c            | 41 ++++++++++++++++++++++++++++++++++++
 3 files changed, 48 insertions(+), 36 deletions(-)

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 8eb15578625e..16bc703c9272 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -115,13 +115,9 @@ void __init setup_node_to_cpumask_map(void)
 	pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids);
 }
 
-static int __init numa_register_memblks(struct numa_meminfo *mi)
+static int __init numa_register_nodes(void)
 {
-	int nid, err;
-
-	err = numa_register_meminfo(mi);
-	if (err)
-		return err;
+	int nid;
 
 	if (!memblock_validate_numa_coverage(SZ_1M))
 		return -EINVAL;
@@ -171,39 +167,11 @@ static int __init numa_init(int (*init_func)(void))
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
 		set_apicid_to_node(i, NUMA_NO_NODE);
 
-	nodes_clear(numa_nodes_parsed);
-	nodes_clear(node_possible_map);
-	nodes_clear(node_online_map);
-	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
-	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.memory,
-				  NUMA_NO_NODE));
-	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.reserved,
-				  NUMA_NO_NODE));
-	/* In case that parsing SRAT failed. */
-	WARN_ON(memblock_clear_hotplug(0, ULLONG_MAX));
-	numa_reset_distance();
-
-	ret = init_func();
+	ret = numa_memblks_init(init_func, /* memblock_force_top_down */ true);
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * We reset memblock back to the top-down direction
-	 * here because if we configured ACPI_NUMA, we have
-	 * parsed SRAT in init_func(). It is ok to have the
-	 * reset here even if we did't configure ACPI_NUMA
-	 * or acpi numa init fails and fallbacks to dummy
-	 * numa init.
-	 */
-	memblock_set_bottom_up(false);
-
-	ret = numa_cleanup_meminfo(&numa_meminfo);
-	if (ret < 0)
-		return ret;
-
-	numa_emulation(&numa_meminfo, numa_distance_cnt);
-
-	ret = numa_register_memblks(&numa_meminfo);
+	ret = numa_register_nodes();
 	if (ret < 0)
 		return ret;
 
diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h
index f81f98678074..07381320848f 100644
--- a/include/linux/numa_memblks.h
+++ b/include/linux/numa_memblks.h
@@ -34,6 +34,9 @@ int __init numa_register_meminfo(struct numa_meminfo *mi);
 void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
 				       const struct numa_meminfo *mi);
 
+int __init numa_memblks_init(int (*init_func)(void),
+			     bool memblock_force_top_down);
+
 #ifdef CONFIG_NUMA_EMU
 int numa_emu_cmdline(char *str);
 void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys,
diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c
index e3c3519725d4..7749b6f6b250 100644
--- a/mm/numa_memblks.c
+++ b/mm/numa_memblks.c
@@ -415,6 +415,47 @@ int __init numa_register_meminfo(struct numa_meminfo *mi)
 	return 0;
 }
 
+int __init numa_memblks_init(int (*init_func)(void),
+			     bool memblock_force_top_down)
+{
+	int ret;
+
+	nodes_clear(numa_nodes_parsed);
+	nodes_clear(node_possible_map);
+	nodes_clear(node_online_map);
+	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
+	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.memory,
+				  NUMA_NO_NODE));
+	WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.reserved,
+				  NUMA_NO_NODE));
+	/* In case that parsing SRAT failed. */
+	WARN_ON(memblock_clear_hotplug(0, ULLONG_MAX));
+	numa_reset_distance();
+
+	ret = init_func();
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * We reset memblock back to the top-down direction
+	 * here because if we configured ACPI_NUMA, we have
+	 * parsed SRAT in init_func(). It is ok to have the
+	 * reset here even if we did't configure ACPI_NUMA
+	 * or acpi numa init fails and fallbacks to dummy
+	 * numa init.
+	 */
+	if (memblock_force_top_down)
+		memblock_set_bottom_up(false);
+
+	ret = numa_cleanup_meminfo(&numa_meminfo);
+	if (ret < 0)
+		return ret;
+
+	numa_emulation(&numa_meminfo, numa_distance_cnt);
+
+	return numa_register_meminfo(&numa_meminfo);
+}
+
 static int __init cmp_memblk(const void *a, const void *b)
 {
 	const struct numa_memblk *ma = *(const struct numa_memblk **)a;
-- 
2.43.0

[PATCH v2 21/25] mm: numa_memblks: make several functions and variables static

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Make functions and variables that are exclusively used by numa_memblks
static.

Move numa_nodemask_from_meminfo() before its callers to avoid forward
declaration.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 include/linux/numa_memblks.h |  8 --------
 mm/numa_memblks.c            | 36 ++++++++++++++++++------------------
 2 files changed, 18 insertions(+), 26 deletions(-)

diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h
index 07381320848f..5c6e12ad0b7a 100644
--- a/include/linux/numa_memblks.h
+++ b/include/linux/numa_memblks.h
@@ -7,7 +7,6 @@
 
 #define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
 
-extern int numa_distance_cnt;
 void __init numa_set_distance(int from, int to, int distance);
 void __init numa_reset_distance(void);
 
@@ -22,17 +21,10 @@ struct numa_meminfo {
 	struct numa_memblk	blk[NR_NODE_MEMBLKS];
 };
 
-extern struct numa_meminfo numa_meminfo __initdata_or_meminfo;
-extern struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
-
 int __init numa_add_memblk(int nodeid, u64 start, u64 end);
 void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi);
 
 int __init numa_cleanup_meminfo(struct numa_meminfo *mi);
-int __init numa_register_meminfo(struct numa_meminfo *mi);
-
-void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
-				       const struct numa_meminfo *mi);
 
 int __init numa_memblks_init(int (*init_func)(void),
 			     bool memblock_force_top_down);
diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c
index 7749b6f6b250..e97665a5e8ce 100644
--- a/mm/numa_memblks.c
+++ b/mm/numa_memblks.c
@@ -7,13 +7,27 @@
 #include <linux/numa.h>
 #include <linux/numa_memblks.h>
 
-int numa_distance_cnt;
+static int numa_distance_cnt;
 static u8 *numa_distance;
 
 nodemask_t numa_nodes_parsed __initdata;
 
-struct numa_meminfo numa_meminfo __initdata_or_meminfo;
-struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
+static struct numa_meminfo numa_meminfo __initdata_or_meminfo;
+static struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
+
+/*
+ * Set nodes, which have memory in @mi, in *@nodemask.
+ */
+static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
+					      const struct numa_meminfo *mi)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
+		if (mi->blk[i].start != mi->blk[i].end &&
+		    mi->blk[i].nid != NUMA_NO_NODE)
+			node_set(mi->blk[i].nid, *nodemask);
+}
 
 /**
  * numa_reset_distance - Reset NUMA distance table
@@ -290,20 +304,6 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
 	return 0;
 }
 
-/*
- * Set nodes, which have memory in @mi, in *@nodemask.
- */
-void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
-				       const struct numa_meminfo *mi)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
-		if (mi->blk[i].start != mi->blk[i].end &&
-		    mi->blk[i].nid != NUMA_NO_NODE)
-			node_set(mi->blk[i].nid, *nodemask);
-}
-
 /*
  * Mark all currently memblock-reserved physical memory (which covers the
  * kernel's own memory ranges) as hot-unswappable.
@@ -371,7 +371,7 @@ static void __init numa_clear_kernel_node_hotplug(void)
 	}
 }
 
-int __init numa_register_meminfo(struct numa_meminfo *mi)
+static int __init numa_register_meminfo(struct numa_meminfo *mi)
 {
 	int i;
 
-- 
2.43.0

[PATCH v2 22/25] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

numa_cleanup_meminfo() moves blocks outside system RAM to
numa_reserved_meminfo and it uses 0 and PFN_PHYS(max_pfn) to determine
the memory boundaries.

Replace the memory range boundaries with more portable
memblock_start_of_DRAM() and memblock_end_of_DRAM().

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 mm/numa_memblks.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c
index e97665a5e8ce..e4358ad92233 100644
--- a/mm/numa_memblks.c
+++ b/mm/numa_memblks.c
@@ -212,8 +212,8 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
  */
 int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
 {
-	const u64 low = 0;
-	const u64 high = PFN_PHYS(max_pfn);
+	const u64 low = memblock_start_of_DRAM();
+	const u64 high = memblock_end_of_DRAM();
 	int i, j, k;
 
 	/* first, trim all entries */
-- 
2.43.0

[PATCH v2 23/25] arch_numa: switch over to numa_memblks

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

Until now arch_numa was directly translating firmware NUMA information
to memblock.

Using numa_memblks as an intermediate step has a few advantages:
* alignment with more battle tested x86 implementation
* availability of NUMA emulation
* maintaining node information for not yet populated memory

Replace current functionality related to numa_add_memblk() and
__node_distance() with the implementation based on numa_memblks and add
functions required by numa_emulation.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 drivers/base/Kconfig       |   1 +
 drivers/base/arch_numa.c   | 200 +++++++++++--------------------------
 include/asm-generic/numa.h |   6 +-
 3 files changed, 64 insertions(+), 143 deletions(-)

diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 2b8fd6bb7da0..064eb52ff7e2 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -226,6 +226,7 @@ config GENERIC_ARCH_TOPOLOGY
 
 config GENERIC_ARCH_NUMA
 	bool
+	select NUMA_MEMBLKS
 	help
 	  Enable support for generic NUMA implementation. Currently, RISC-V
 	  and ARM64 use it.
diff --git a/drivers/base/arch_numa.c b/drivers/base/arch_numa.c
index 2ebf12eab99f..806550239d08 100644
--- a/drivers/base/arch_numa.c
+++ b/drivers/base/arch_numa.c
@@ -12,14 +12,12 @@
 #include <linux/memblock.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/numa_memblks.h>
 
 #include <asm/sections.h>
 
-nodemask_t numa_nodes_parsed __initdata;
 static int cpu_to_node_map[NR_CPUS] = { [0 ... NR_CPUS-1] = NUMA_NO_NODE };
 
-static int numa_distance_cnt;
-static u8 *numa_distance;
 bool numa_off;
 
 static __init int numa_parse_early_param(char *opt)
@@ -28,6 +26,8 @@ static __init int numa_parse_early_param(char *opt)
 		return -EINVAL;
 	if (str_has_prefix(opt, "off"))
 		numa_off = true;
+	if (!strncmp(opt, "fake=", 5))
+		return numa_emu_cmdline(opt + 5);
 
 	return 0;
 }
@@ -59,6 +59,7 @@ EXPORT_SYMBOL(cpumask_of_node);
 
 #endif
 
+#ifndef CONFIG_NUMA_EMU
 static void numa_update_cpu(unsigned int cpu, bool remove)
 {
 	int nid = cpu_to_node(cpu);
@@ -81,6 +82,7 @@ void numa_remove_cpu(unsigned int cpu)
 {
 	numa_update_cpu(cpu, true);
 }
+#endif
 
 void numa_clear_node(unsigned int cpu)
 {
@@ -142,7 +144,7 @@ void __init early_map_cpu_to_node(unsigned int cpu, int nid)
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(__per_cpu_offset);
 
-int __init early_cpu_to_node(int cpu)
+int early_cpu_to_node(int cpu)
 {
 	return cpu_to_node_map[cpu];
 }
@@ -187,30 +189,6 @@ void __init setup_per_cpu_areas(void)
 }
 #endif
 
-/**
- * numa_add_memblk() - Set node id to memblk
- * @nid: NUMA node ID of the new memblk
- * @start: Start address of the new memblk
- * @end:  End address of the new memblk
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-int __init numa_add_memblk(int nid, u64 start, u64 end)
-{
-	int ret;
-
-	ret = memblock_set_node(start, (end - start), &memblock.memory, nid);
-	if (ret < 0) {
-		pr_err("memblock [0x%llx - 0x%llx] failed to add on node %d\n",
-			start, (end - 1), nid);
-		return ret;
-	}
-
-	node_set(nid, numa_nodes_parsed);
-	return ret;
-}
-
 /*
  * Initialize NODE_DATA for a node on the local memory
  */
@@ -226,116 +204,9 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
 	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 }
 
-/*
- * numa_free_distance
- *
- * The current table is freed.
- */
-void __init numa_free_distance(void)
-{
-	size_t size;
-
-	if (!numa_distance)
-		return;
-
-	size = numa_distance_cnt * numa_distance_cnt *
-		sizeof(numa_distance[0]);
-
-	memblock_free(numa_distance, size);
-	numa_distance_cnt = 0;
-	numa_distance = NULL;
-}
-
-/*
- * Create a new NUMA distance table.
- */
-static int __init numa_alloc_distance(void)
-{
-	size_t size;
-	int i, j;
-
-	size = nr_node_ids * nr_node_ids * sizeof(numa_distance[0]);
-	numa_distance = memblock_alloc(size, PAGE_SIZE);
-	if (WARN_ON(!numa_distance))
-		return -ENOMEM;
-
-	numa_distance_cnt = nr_node_ids;
-
-	/* fill with the default distances */
-	for (i = 0; i < numa_distance_cnt; i++)
-		for (j = 0; j < numa_distance_cnt; j++)
-			numa_distance[i * numa_distance_cnt + j] = i == j ?
-				LOCAL_DISTANCE : REMOTE_DISTANCE;
-
-	pr_debug("Initialized distance table, cnt=%d\n", numa_distance_cnt);
-
-	return 0;
-}
-
-/**
- * numa_set_distance() - Set inter node NUMA distance from node to node.
- * @from: the 'from' node to set distance
- * @to: the 'to'  node to set distance
- * @distance: NUMA distance
- *
- * Set the distance from node @from to @to to @distance.
- * If distance table doesn't exist, a warning is printed.
- *
- * If @from or @to is higher than the highest known node or lower than zero
- * or @distance doesn't make sense, the call is ignored.
- */
-void __init numa_set_distance(int from, int to, int distance)
-{
-	if (!numa_distance) {
-		pr_warn_once("Warning: distance table not allocated yet\n");
-		return;
-	}
-
-	if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
-			from < 0 || to < 0) {
-		pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
-			    from, to, distance);
-		return;
-	}
-
-	if ((u8)distance != distance ||
-	    (from == to && distance != LOCAL_DISTANCE)) {
-		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
-			     from, to, distance);
-		return;
-	}
-
-	numa_distance[from * numa_distance_cnt + to] = distance;
-}
-
-/*
- * Return NUMA distance @from to @to
- */
-int __node_distance(int from, int to)
-{
-	if (from >= numa_distance_cnt || to >= numa_distance_cnt)
-		return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
-	return numa_distance[from * numa_distance_cnt + to];
-}
-EXPORT_SYMBOL(__node_distance);
-
 static int __init numa_register_nodes(void)
 {
 	int nid;
-	struct memblock_region *mblk;
-
-	/* Check that valid nid is set to memblks */
-	for_each_mem_region(mblk) {
-		int mblk_nid = memblock_get_region_node(mblk);
-		phys_addr_t start = mblk->base;
-		phys_addr_t end = mblk->base + mblk->size - 1;
-
-		if (mblk_nid == NUMA_NO_NODE || mblk_nid >= MAX_NUMNODES) {
-			pr_warn("Warning: invalid memblk node %d [mem %pap-%pap]\n",
-				mblk_nid, &start, &end);
-			return -EINVAL;
-		}
-	}
 
 	/* Finally register nodes. */
 	for_each_node_mask(nid, numa_nodes_parsed) {
@@ -360,11 +231,7 @@ static int __init numa_init(int (*init_func)(void))
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
 
-	ret = numa_alloc_distance();
-	if (ret < 0)
-		return ret;
-
-	ret = init_func();
+	ret = numa_memblks_init(init_func, /* memblock_force_top_down */ false);
 	if (ret < 0)
 		goto out_free_distance;
 
@@ -382,7 +249,7 @@ static int __init numa_init(int (*init_func)(void))
 
 	return 0;
 out_free_distance:
-	numa_free_distance();
+	numa_reset_distance();
 	return ret;
 }
 
@@ -454,3 +321,54 @@ void __init arch_numa_init(void)
 
 	numa_init(dummy_numa_init);
 }
+
+#ifdef CONFIG_NUMA_EMU
+void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys,
+					unsigned int nr_emu_nids)
+{
+	int i, j;
+
+	/*
+	 * Transform cpu_to_node_map table to use emulated nids by
+	 * reverse-mapping phys_nid.  The maps should always exist but fall
+	 * back to zero just in case.
+	 */
+	for (i = 0; i < ARRAY_SIZE(cpu_to_node_map); i++) {
+		if (cpu_to_node_map[i] == NUMA_NO_NODE)
+			continue;
+		for (j = 0; j < nr_emu_nids; j++)
+			if (cpu_to_node_map[i] == emu_nid_to_phys[j])
+				break;
+		cpu_to_node_map[i] = j < nr_emu_nids ? j : 0;
+	}
+}
+
+u64 __init numa_emu_dma_end(void)
+{
+	return PFN_PHYS(memblock_start_of_DRAM() + SZ_4G);
+}
+
+void debug_cpumask_set_cpu(unsigned int cpu, int node, bool enable)
+{
+	struct cpumask *mask;
+
+	if (node == NUMA_NO_NODE)
+		return;
+
+	mask = node_to_cpumask_map[node];
+	if (!cpumask_available(mask)) {
+		pr_err("node_to_cpumask_map[%i] NULL\n", node);
+		dump_stack();
+		return;
+	}
+
+	if (enable)
+		cpumask_set_cpu(cpu, mask);
+	else
+		cpumask_clear_cpu(cpu, mask);
+
+	pr_debug("%s cpu %d node %d: mask now %*pbl\n",
+		 enable ? "numa_add_cpu" : "numa_remove_cpu",
+		 cpu, node, cpumask_pr_args(mask));
+}
+#endif /* CONFIG_NUMA_EMU */
diff --git a/include/asm-generic/numa.h b/include/asm-generic/numa.h
index c32e0cf23c90..c2b046d1fd82 100644
--- a/include/asm-generic/numa.h
+++ b/include/asm-generic/numa.h
@@ -32,8 +32,6 @@ static inline const struct cpumask *cpumask_of_node(int node)
 
 void __init arch_numa_init(void);
 int __init numa_add_memblk(int nodeid, u64 start, u64 end);
-void __init numa_set_distance(int from, int to, int distance);
-void __init numa_free_distance(void);
 void __init early_map_cpu_to_node(unsigned int cpu, int nid);
 int __init early_cpu_to_node(int cpu);
 void numa_store_cpu_info(unsigned int cpu);
@@ -51,4 +49,8 @@ static inline int early_cpu_to_node(int cpu) { return 0; }
 
 #endif	/* CONFIG_NUMA */
 
+#ifdef CONFIG_NUMA_EMU
+void debug_cpumask_set_cpu(unsigned int cpu, int node, bool enable);
+#endif
+
 #endif	/* __ASM_GENERIC_NUMA_H */
-- 
2.43.0

[PATCH v2 24/25] mm: make range-to-target_node lookup facility a part of numa_memblks

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

The x86 implementation of range-to-target_node lookup (i.e.
phys_to_target_node() and memory_add_physaddr_to_nid()) relies on
numa_memblks.

Since numa_memblks are now part of the generic code, move these
functions from x86 to mm/numa_memblks.c and select
CONFIG_NUMA_KEEP_MEMINFO when CONFIG_NUMA_MEMBLKS=y for dax and cxl.

Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 arch/x86/include/asm/sparsemem.h |  9 --------
 arch/x86/mm/numa.c               | 38 --------------------------------
 drivers/cxl/Kconfig              |  2 +-
 drivers/dax/Kconfig              |  2 +-
 include/linux/numa_memblks.h     |  7 ++++++
 mm/numa.c                        |  1 +
 mm/numa_memblks.c                | 38 ++++++++++++++++++++++++++++++++
 7 files changed, 48 insertions(+), 49 deletions(-)

diff --git a/arch/x86/include/asm/sparsemem.h b/arch/x86/include/asm/sparsemem.h
index 64df897c0ee3..3918c7a434f5 100644
--- a/arch/x86/include/asm/sparsemem.h
+++ b/arch/x86/include/asm/sparsemem.h
@@ -31,13 +31,4 @@
 
 #endif /* CONFIG_SPARSEMEM */
 
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_NUMA_KEEP_MEMINFO
-extern int phys_to_target_node(phys_addr_t start);
-#define phys_to_target_node phys_to_target_node
-extern int memory_add_physaddr_to_nid(u64 start);
-#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
-#endif
-#endif /* __ASSEMBLY__ */
-
 #endif /* _ASM_X86_SPARSEMEM_H */
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 16bc703c9272..8e790528805e 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -449,41 +449,3 @@ u64 __init numa_emu_dma_end(void)
 	return PFN_PHYS(MAX_DMA32_PFN);
 }
 #endif /* CONFIG_NUMA_EMU */
-
-#ifdef CONFIG_NUMA_KEEP_MEMINFO
-static int meminfo_to_nid(struct numa_meminfo *mi, u64 start)
-{
-	int i;
-
-	for (i = 0; i < mi->nr_blks; i++)
-		if (mi->blk[i].start <= start && mi->blk[i].end > start)
-			return mi->blk[i].nid;
-	return NUMA_NO_NODE;
-}
-
-int phys_to_target_node(phys_addr_t start)
-{
-	int nid = meminfo_to_nid(&numa_meminfo, start);
-
-	/*
-	 * Prefer online nodes, but if reserved memory might be
-	 * hot-added continue the search with reserved ranges.
-	 */
-	if (nid != NUMA_NO_NODE)
-		return nid;
-
-	return meminfo_to_nid(&numa_reserved_meminfo, start);
-}
-EXPORT_SYMBOL_GPL(phys_to_target_node);
-
-int memory_add_physaddr_to_nid(u64 start)
-{
-	int nid = meminfo_to_nid(&numa_meminfo, start);
-
-	if (nid == NUMA_NO_NODE)
-		nid = numa_meminfo.blk[0].nid;
-	return nid;
-}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-
-#endif
diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
index 99b5c25be079..29c192f20082 100644
--- a/drivers/cxl/Kconfig
+++ b/drivers/cxl/Kconfig
@@ -6,7 +6,7 @@ menuconfig CXL_BUS
 	select FW_UPLOAD
 	select PCI_DOE
 	select FIRMWARE_TABLE
-	select NUMA_KEEP_MEMINFO if (NUMA && X86)
+	select NUMA_KEEP_MEMINFO if NUMA_MEMBLKS
 	help
 	  CXL is a bus that is electrically compatible with PCI Express, but
 	  layers three protocols on that signalling (CXL.io, CXL.cache, and
diff --git a/drivers/dax/Kconfig b/drivers/dax/Kconfig
index a88744244149..d656e4c0eb84 100644
--- a/drivers/dax/Kconfig
+++ b/drivers/dax/Kconfig
@@ -30,7 +30,7 @@ config DEV_DAX_PMEM
 config DEV_DAX_HMEM
 	tristate "HMEM DAX: direct access to 'specific purpose' memory"
 	depends on EFI_SOFT_RESERVE
-	select NUMA_KEEP_MEMINFO if (NUMA && X86)
+	select NUMA_KEEP_MEMINFO if NUMA_MEMBLKS
 	default DEV_DAX
 	help
 	  EFI 2.8 platforms, and others, may advertise 'specific purpose'
diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h
index 5c6e12ad0b7a..17d4bcc34091 100644
--- a/include/linux/numa_memblks.h
+++ b/include/linux/numa_memblks.h
@@ -46,6 +46,13 @@ static inline int numa_emu_cmdline(char *str)
 }
 #endif /* CONFIG_NUMA_EMU */
 
+#ifdef CONFIG_NUMA_KEEP_MEMINFO
+extern int phys_to_target_node(phys_addr_t start);
+#define phys_to_target_node phys_to_target_node
+extern int memory_add_physaddr_to_nid(u64 start);
+#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
+#endif /* CONFIG_NUMA_KEEP_MEMINFO */
+
 #endif /* CONFIG_NUMA_MEMBLKS */
 
 #endif	/* __NUMA_MEMBLKS_H */
diff --git a/mm/numa.c b/mm/numa.c
index 67a0d7734a98..da27eb151dc5 100644
--- a/mm/numa.c
+++ b/mm/numa.c
@@ -3,6 +3,7 @@
 #include <linux/memblock.h>
 #include <linux/printk.h>
 #include <linux/numa.h>
+#include <linux/numa_memblks.h>
 
 struct pglist_data *node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c
index e4358ad92233..8609c6eb3998 100644
--- a/mm/numa_memblks.c
+++ b/mm/numa_memblks.c
@@ -528,3 +528,41 @@ int __init numa_fill_memblks(u64 start, u64 end)
 	}
 	return 0;
 }
+
+#ifdef CONFIG_NUMA_KEEP_MEMINFO
+static int meminfo_to_nid(struct numa_meminfo *mi, u64 start)
+{
+	int i;
+
+	for (i = 0; i < mi->nr_blks; i++)
+		if (mi->blk[i].start <= start && mi->blk[i].end > start)
+			return mi->blk[i].nid;
+	return NUMA_NO_NODE;
+}
+
+int phys_to_target_node(phys_addr_t start)
+{
+	int nid = meminfo_to_nid(&numa_meminfo, start);
+
+	/*
+	 * Prefer online nodes, but if reserved memory might be
+	 * hot-added continue the search with reserved ranges.
+	 */
+	if (nid != NUMA_NO_NODE)
+		return nid;
+
+	return meminfo_to_nid(&numa_reserved_meminfo, start);
+}
+EXPORT_SYMBOL_GPL(phys_to_target_node);
+
+int memory_add_physaddr_to_nid(u64 start)
+{
+	int nid = meminfo_to_nid(&numa_meminfo, start);
+
+	if (nid == NUMA_NO_NODE)
+		nid = numa_meminfo.blk[0].nid;
+	return nid;
+}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+
+#endif /* CONFIG_NUMA_KEEP_MEMINFO */
-- 
2.43.0

[PATCH v2 25/25] docs: move numa=fake description to kernel-parameters.txt

[Mike Rapoport]

From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>

NUMA emulation can be now enabled on arm64 and riscv in addition to x86.

Move description of numa=fake parameters from x86 documentation of
admin-guide/kernel-parameters.txt

Suggested-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
 Documentation/admin-guide/kernel-parameters.txt | 15 +++++++++++++++
 Documentation/arch/x86/x86_64/boot-options.rst  | 12 ------------
 2 files changed, 15 insertions(+), 12 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 27ec49af1bf2..d64e27768429 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4158,6 +4158,21 @@
 			Disable NUMA, Only set up a single NUMA node
 			spanning all memory.
 
+	numa=fake=<size>[MG]
+			[KNL, ARM64, RISCV, X86, EARLY]
+			If given as a memory unit, fills all system RAM with
+			nodes of size interleaved over physical nodes.
+
+	numa=fake=<N>
+			[KNL, ARM64, RISCV, X86, EARLY]
+			If given as an integer, fills all system RAM with N
+			fake nodes interleaved over physical nodes.
+
+	numa=fake=<N>U
+			[KNL, ARM64, RISCV, X86, EARLY]
+			If given as an integer followed by 'U', it will
+			divide each physical node into N emulated nodes.
+
 	numa_balancing=	[KNL,ARM64,PPC,RISCV,S390,X86] Enable or disable automatic
 			NUMA balancing.
 			Allowed values are enable and disable
diff --git a/Documentation/arch/x86/x86_64/boot-options.rst b/Documentation/arch/x86/x86_64/boot-options.rst
index 137432d34109..98d4805f0823 100644
--- a/Documentation/arch/x86/x86_64/boot-options.rst
+++ b/Documentation/arch/x86/x86_64/boot-options.rst
@@ -170,18 +170,6 @@ NUMA
     Don't parse the HMAT table for NUMA setup, or soft-reserved memory
     partitioning.
 
-  numa=fake=<size>[MG]
-    If given as a memory unit, fills all system RAM with nodes of
-    size interleaved over physical nodes.
-
-  numa=fake=<N>
-    If given as an integer, fills all system RAM with N fake nodes
-    interleaved over physical nodes.
-
-  numa=fake=<N>U
-    If given as an integer followed by 'U', it will divide each
-    physical node into N emulated nodes.
-
 ACPI
 ====
 
-- 
2.43.0

Re: [PATCH v2 00/25] mm: introduce numa_memblks

[Zi Yan]

[-- Attachment #1.1: Type: text/plain, Size: 4622 bytes --]

On 23 Jul 2024, at 2:41, Mike Rapoport wrote:

> From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
>
> Hi,
>
> Following the discussion about handling of CXL fixed memory windows on
> arm64 [1] I decided to bite the bullet and move numa_memblks from x86 to
> the generic code so they will be available on arm64/riscv and maybe on
> loongarch sometime later.
>
> While it could be possible to use memblock to describe CXL memory windows,
> it currently lacks notion of unpopulated memory ranges and numa_memblks
> does implement this.
>
> Another reason to make numa_memblks generic is that both arch_numa (arm64
> and riscv) and loongarch use trimmed copy of x86 code although there is no
> fundamental reason why the same code cannot be used on all these platforms.
> Having numa_memblks in mm/ will make it's interaction with ACPI and FDT
> more consistent and I believe will reduce maintenance burden.
>
> And with generic numa_memblks it is (almost) straightforward to enable NUMA
> emulation on arm64 and riscv.
>
> The first 9 commits in this series are cleanups that are not strictly
> related to numa_memblks.
> Commits 10-16 slightly reorder code in x86 to allow extracting numa_memblks
> and NUMA emulation to the generic code.
> Commits 17-19 actually move the code from arch/x86/ to mm/ and commits 20-22
> does some aftermath cleanups.
> Commit 23 switches arch_numa to numa_memblks.
> Commit 24 enables usage of phys_to_target_node() and
> memory_add_physaddr_to_nid() with numa_memblks.
> Commit 25 moves the description for numa=fake from x86 to admin-guide
>
> [1] https://lore.kernel.org/all/20240529171236.32002-1-Jonathan.Cameron@huawei.com/
>
> v1: https://lore.kernel.org/all/20240716111346.3676969-1-rppt@kernel.org
> * add cleanup for arch_alloc_nodedata and HAVE_ARCH_NODEDATA_EXTENSION
> * add patch that moves description of numa=fake kernel parameter from
>   x86 to admin-guide
> * reduce rounding up of node_data allocations from PAGE_SIZE to
>   SMP_CACHE_BYTES
> * restore single allocation attempt of numa_distance
> * fix several comments
> * added review tags
>
> Mike Rapoport (Microsoft) (25):
>   mm: move kernel/numa.c to mm/
>   MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
>   MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
>   MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
>   MIPS: loongson64: rename __node_data to node_data
>   MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
>   mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
>   arch, mm: move definition of node_data to generic code
>   arch, mm: pull out allocation of NODE_DATA to generic code
>   x86/numa: simplify numa_distance allocation
>   x86/numa: use get_pfn_range_for_nid to verify that node spans memory
>   x86/numa: move FAKE_NODE_* defines to numa_emu
>   x86/numa_emu: simplify allocation of phys_dist
>   x86/numa_emu: split __apicid_to_node update to a helper function
>   x86/numa_emu: use a helper function to get MAX_DMA32_PFN
>   x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
>   mm: introduce numa_memblks
>   mm: move numa_distance and related code from x86 to numa_memblks
>   mm: introduce numa_emulation
>   mm: numa_memblks: introduce numa_memblks_init
>   mm: numa_memblks: make several functions and variables static
>   mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing
>     meminfo
>   arch_numa: switch over to numa_memblks
>   mm: make range-to-target_node lookup facility a part of numa_memblks
>   docs: move numa=fake description to kernel-parameters.txt
>
Hi,

I have tested this series on both x86_64 and arm64. It works fine on x86_64.
All numa=fake= options work as they did before the series.

But I am not able to boot the kernel (no printout at all) on arm64 VM
(Mac mini M1 VMWare). By git bisecting, arch_numa: switch over to numa_memblks
is the first patch causing the boot failure. I see the warning:

WARNING: modpost: vmlinux: section mismatch in reference: numa_add_cpu+0x1c (section: .text) -> early_cpu_to_node (section: .init.text)

I am not sure if it is red herring or not, since changing early_cpu_to_node
to cpu_to_node in numa_add_cpu() from mm/numa_emulation.c did get rid of the
warning, but the system still failed to boot.

Please note that you need binutils 2.40 to build the arm64 kernel, since there
is a bug(https://sourceware.org/bugzilla/show_bug.cgi?id=31924) in 2.42 preventing
arm64 kernel from booting as well.

My config is attached.

--
Best Regards,
Yan, Zi

[-- Attachment #1.2: arm64_config --]
[-- Type: text/plain, Size: 204568 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 6.10.0 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (Debian 12.2.0-14) 12.2.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120200
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24000
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24000
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=124
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_IRQ_IPI=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
# CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_BPF_LSM=y
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_SCHED_HW_PRESSURE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_NEED_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# CONFIG_RCU_LAZY is not set
# end of RCU Subsystem

CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
# CONFIG_PRINTK_INDEX is not set
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
CONFIG_CC_NO_STRINGOP_OVERFLOW=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_SLAB_OBJ_EXT=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SCHED_MM_CID=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_BASE_SMALL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_CACHESTAT_SYSCALL=y
# CONFIG_PC104 is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y

#
# Kexec and crash features
#
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
# end of Kexec and crash features
# end of General setup

CONFIG_ARM64=y
CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARM64_CONT_PTE_SHIFT=4
CONFIG_ARM64_CONT_PMD_SHIFT=4
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_BITS_MAX=33
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_SMP=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_BUILTIN_RETURN_ADDRESS_STRIPS_PAC=y

#
# Platform selection
#
# CONFIG_ARCH_ACTIONS is not set
# CONFIG_ARCH_AIROHA is not set
CONFIG_ARCH_SUNXI=y
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_APPLE is not set
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM2835=y
# CONFIG_ARCH_BCM_IPROC is not set
# CONFIG_ARCH_BCMBCA is not set
# CONFIG_ARCH_BRCMSTB is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_BITMAIN is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SPARX5 is not set
CONFIG_ARCH_K3=y
# CONFIG_ARCH_LG1K is not set
CONFIG_ARCH_HISI=y
# CONFIG_ARCH_KEEMBAY is not set
# CONFIG_ARCH_MEDIATEK is not set
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_NXP=y
CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_S32 is not set
# CONFIG_ARCH_MA35 is not set
# CONFIG_ARCH_NPCM is not set
# CONFIG_ARCH_PENSANDO is not set
CONFIG_ARCH_QCOM=y
# CONFIG_ARCH_REALTEK is not set
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
# CONFIG_ARCH_INTEL_SOCFPGA is not set
# CONFIG_ARCH_STM32 is not set
CONFIG_ARCH_SYNQUACER=y
CONFIG_ARCH_TEGRA=y
# CONFIG_ARCH_SPRD is not set
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_THUNDER2=y
# CONFIG_ARCH_UNIPHIER is not set
CONFIG_ARCH_VEXPRESS=y
# CONFIG_ARCH_VISCONTI is not set
CONFIG_ARCH_XGENE=y
CONFIG_ARCH_ZYNQMP=y
# end of Platform selection

#
# Kernel Features
#

#
# ARM errata workarounds via the alternatives framework
#
CONFIG_AMPERE_ERRATUM_AC03_CPU_38=y
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
CONFIG_ARM64_ERRATUM_826319=y
CONFIG_ARM64_ERRATUM_827319=y
CONFIG_ARM64_ERRATUM_824069=y
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_834220=y
CONFIG_ARM64_ERRATUM_1742098=y
CONFIG_ARM64_ERRATUM_845719=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
CONFIG_ARM64_ERRATUM_1024718=y
CONFIG_ARM64_ERRATUM_1418040=y
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
CONFIG_ARM64_ERRATUM_1165522=y
CONFIG_ARM64_ERRATUM_1319367=y
CONFIG_ARM64_ERRATUM_1530923=y
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
CONFIG_ARM64_ERRATUM_2441007=y
CONFIG_ARM64_ERRATUM_1286807=y
CONFIG_ARM64_ERRATUM_1463225=y
CONFIG_ARM64_ERRATUM_1542419=y
CONFIG_ARM64_ERRATUM_1508412=y
CONFIG_ARM64_ERRATUM_2051678=y
CONFIG_ARM64_ERRATUM_2077057=y
CONFIG_ARM64_ERRATUM_2658417=y
CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
CONFIG_ARM64_ERRATUM_2054223=y
CONFIG_ARM64_ERRATUM_2067961=y
CONFIG_ARM64_ERRATUM_2441009=y
CONFIG_ARM64_ERRATUM_2457168=y
CONFIG_ARM64_ERRATUM_2645198=y
CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD=y
CONFIG_ARM64_ERRATUM_2966298=y
CONFIG_ARM64_ERRATUM_3117295=y
CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS=y
CONFIG_ARM64_ERRATUM_3194386=y
CONFIG_ARM64_ERRATUM_3312417=y
CONFIG_CAVIUM_ERRATUM_22375=y
CONFIG_CAVIUM_ERRATUM_23144=y
CONFIG_CAVIUM_ERRATUM_23154=y
CONFIG_CAVIUM_ERRATUM_27456=y
CONFIG_CAVIUM_ERRATUM_30115=y
CONFIG_CAVIUM_TX2_ERRATUM_219=y
CONFIG_FUJITSU_ERRATUM_010001=y
CONFIG_HISILICON_ERRATUM_161600802=y
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
CONFIG_QCOM_FALKOR_ERRATUM_1009=y
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
CONFIG_ROCKCHIP_ERRATUM_3588001=y
CONFIG_SOCIONEXT_SYNQUACER_PREITS=y
# end of ARM errata workarounds via the alternatives framework

CONFIG_ARM64_4K_PAGES=y
# CONFIG_ARM64_16K_PAGES is not set
# CONFIG_ARM64_64K_PAGES is not set
# CONFIG_ARM64_VA_BITS_39 is not set
CONFIG_ARM64_VA_BITS_48=y
# CONFIG_ARM64_VA_BITS_52 is not set
CONFIG_ARM64_VA_BITS=48
CONFIG_ARM64_PA_BITS_48=y
CONFIG_ARM64_PA_BITS=48
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_CLUSTER is not set
CONFIG_SCHED_SMT=y
CONFIG_NR_CPUS=256
CONFIG_HOTPLUG_CPU=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_FILE=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG=y
CONFIG_ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION=y
CONFIG_TRANS_TABLE=y
CONFIG_XEN_DOM0=y
CONFIG_XEN=y
CONFIG_ARCH_FORCE_MAX_ORDER=10
CONFIG_UNMAP_KERNEL_AT_EL0=y
CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
# CONFIG_ARM64_SW_TTBR0_PAN is not set
CONFIG_ARM64_TAGGED_ADDR_ABI=y
CONFIG_COMPAT=y
CONFIG_KUSER_HELPERS=y
CONFIG_COMPAT_ALIGNMENT_FIXUPS=y
CONFIG_ARMV8_DEPRECATED=y
CONFIG_SWP_EMULATION=y
CONFIG_CP15_BARRIER_EMULATION=y
CONFIG_SETEND_EMULATION=y

#
# ARMv8.1 architectural features
#
CONFIG_ARM64_HW_AFDBM=y
CONFIG_ARM64_PAN=y
CONFIG_AS_HAS_LSE_ATOMICS=y
CONFIG_ARM64_LSE_ATOMICS=y
CONFIG_ARM64_USE_LSE_ATOMICS=y
# end of ARMv8.1 architectural features

#
# ARMv8.2 architectural features
#
CONFIG_AS_HAS_ARMV8_2=y
CONFIG_AS_HAS_SHA3=y
CONFIG_ARM64_PMEM=y
CONFIG_ARM64_RAS_EXTN=y
CONFIG_ARM64_CNP=y
# end of ARMv8.2 architectural features

#
# ARMv8.3 architectural features
#
CONFIG_ARM64_PTR_AUTH=y
CONFIG_ARM64_PTR_AUTH_KERNEL=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET=y
CONFIG_CC_HAS_SIGN_RETURN_ADDRESS=y
CONFIG_AS_HAS_ARMV8_3=y
CONFIG_AS_HAS_CFI_NEGATE_RA_STATE=y
CONFIG_AS_HAS_LDAPR=y
# end of ARMv8.3 architectural features

#
# ARMv8.4 architectural features
#
CONFIG_ARM64_AMU_EXTN=y
CONFIG_AS_HAS_ARMV8_4=y
CONFIG_ARM64_TLB_RANGE=y
# end of ARMv8.4 architectural features

#
# ARMv8.5 architectural features
#
CONFIG_AS_HAS_ARMV8_5=y
CONFIG_ARM64_BTI=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI=y
CONFIG_ARM64_E0PD=y
CONFIG_ARM64_AS_HAS_MTE=y
CONFIG_ARM64_MTE=y
# end of ARMv8.5 architectural features

#
# ARMv8.7 architectural features
#
CONFIG_ARM64_EPAN=y
# end of ARMv8.7 architectural features

CONFIG_ARM64_SVE=y
CONFIG_ARM64_SME=y
# CONFIG_ARM64_PSEUDO_NMI is not set
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
CONFIG_STACKPROTECTOR_PER_TASK=y
CONFIG_ARM64_CONTPTE=y
# end of Kernel Features

#
# Boot options
#
CONFIG_ARM64_ACPI_PARKING_PROTOCOL=y
CONFIG_CMDLINE=""
CONFIG_EFI_STUB=y
CONFIG_EFI=y
CONFIG_DMI=y
# end of Boot options

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_HIBERNATION_COMP_LZO=y
CONFIG_HIBERNATION_DEF_COMP="lzo"
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# end of Power management options

#
# CPU Power Management
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_DT_IDLE_STATES=y
CONFIG_DT_IDLE_GENPD=y

#
# ARM CPU Idle Drivers
#
CONFIG_ARM_PSCI_CPUIDLE=y
CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
# end of ARM CPU Idle Drivers
# end of CPU Idle

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
CONFIG_CPUFREQ_DT_PLATDEV=y
# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
# CONFIG_ARM_SCMI_CPUFREQ is not set
CONFIG_ARM_TI_CPUFREQ=y
# CONFIG_QORIQ_CPUFREQ is not set
# CONFIG_ACPI_CPPC_CPUFREQ is not set
# end of CPU Frequency scaling
# end of CPU Power Management

CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_GENERIC_GSI=y
CONFIG_ACPI_CCA_REQUIRED=y
CONFIG_ACPI_THERMAL_LIB=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_MCFG=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_HED=y
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_ACPI_NHLT=y
# CONFIG_ACPI_NFIT is not set
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_SEA=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
CONFIG_ACPI_IORT=y
CONFIG_ACPI_GTDT=y
CONFIG_ACPI_APMT=y
CONFIG_ACPI_PPTT=y
CONFIG_ACPI_PCC=y
# CONFIG_ACPI_FFH is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_ACPI_PRMT=y
CONFIG_KVM_COMMON=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_NEED_KVM_DIRTY_RING_WITH_BITMAP=y
CONFIG_KVM_MMIO=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_READONLY_MEM=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_KVM_GENERIC_HARDWARE_ENABLING=y
CONFIG_KVM_GENERIC_MMU_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_NVHE_EL2_DEBUG is not set
CONFIG_CPU_MITIGATIONS=y

#
# General architecture-dependent options
#
CONFIG_ARCH_HAS_SUBPAGE_FAULTS=y
CONFIG_HOTPLUG_CORE_SYNC=y
CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_SHADOW_CALL_STACK=y
# CONFIG_SHADOW_CALL_STACK is not set
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_PMD_MKWRITE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_WANTS_EXECMEM_LATE=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_HAVE_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SHIFT=12
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_COMPILER_H=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_RELR=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_KEY=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAVE_TRACE_MMIO_ACCESS=y
CONFIG_ARCH_HAS_HW_PTE_YOUNG=y
CONFIG_ARCH_HAS_KERNEL_FPU_SUPPORT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_8B=y
CONFIG_FUNCTION_ALIGNMENT=8
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
# CONFIG_MODULE_DEBUG is not set
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
# CONFIG_MODULE_SIG_SHA3_256 is not set
# CONFIG_MODULE_SIG_SHA3_384 is not set
# CONFIG_MODULE_SIG_SHA3_512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
CONFIG_BLK_DEV_WRITE_MOUNTED=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
CONFIG_BLK_CGROUP_IOCOST=y
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK=y
CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_READ_LOCK=y
CONFIG_ARCH_INLINE_READ_LOCK_BH=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_READ_UNLOCK=y
CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_WRITE_LOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_SPIN_TRYLOCK=y
CONFIG_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_INLINE_SPIN_LOCK=y
CONFIG_INLINE_SPIN_LOCK_BH=y
CONFIG_INLINE_SPIN_LOCK_IRQ=y
CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_INLINE_SPIN_UNLOCK_BH=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_READ_LOCK=y
CONFIG_INLINE_READ_LOCK_BH=y
CONFIG_INLINE_READ_LOCK_IRQ=y
CONFIG_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_BH=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_WRITE_LOCK=y
CONFIG_INLINE_WRITE_LOCK_BH=y
CONFIG_INLINE_WRITE_LOCK_IRQ=y
CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_BH=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_ARCH_HAVE_ELF_PROT=y
CONFIG_ARCH_USE_GNU_PROPERTY=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_SHRINKER_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
# CONFIG_ZSMALLOC is not set

#
# Slab allocator options
#
CONFIG_SLUB=y
# CONFIG_SLUB_TINY is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_RANDOM_KMALLOC_CACHES is not set
# end of Slab allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_GUP_FAST=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_TRANSPARENT_HUGEPAGE_NEVER is not set
CONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_PGTABLE_HAS_HUGE_LEAVES=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUGFS is not set
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=19
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
# CONFIG_ZONE_DEVICE is not set
CONFIG_GET_FREE_REGION=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_USES_PG_ARCH_X=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
CONFIG_MEMFD_CREATE=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_USERFAULTFD=y
CONFIG_PTE_MARKER_UFFD_WP=y
CONFIG_LRU_GEN=y
# CONFIG_LRU_GEN_ENABLED is not set
# CONFIG_LRU_GEN_STATS is not set
CONFIG_LRU_GEN_WALKS_MMU=y
CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y
CONFIG_PER_VMA_LOCK=y
CONFIG_LOCK_MM_AND_FIND_VMA=y
CONFIG_EXECMEM=y
CONFIG_NUMA_MEMBLKS=y
CONFIG_NUMA_EMU=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
# CONFIG_NET_KEY is not set
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TABLE_PERTURB_ORDER=16
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_SIGPOOL=y
# CONFIG_TCP_AO is not set
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_BPF_LINK=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_LOG_SYSLOG is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XTABLES_COMPAT=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_IPTABLES_LEGACY=m
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPFILTER is not set
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# end of IPv6: Netfilter Configuration

# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=m
# CONFIG_VSOCKETS_DIAG is not set
CONFIG_VSOCKETS_LOOPBACK=m
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS_COMMON=m
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
# CONFIG_MPLS_ROUTING is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
# CONFIG_FAILOVER is not set
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_TEGRA_AHB=y
CONFIG_HAVE_PCI=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_BRIDGE_EMUL=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCI_DYNAMIC_OF_NODES is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_AMPERE_ALTRA is not set
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_PCI_AARDVARK=y
# CONFIG_PCIE_ALTERA is not set
CONFIG_PCIE_BRCMSTB=y
CONFIG_PCI_HOST_THUNDER_PEM=y
CONFIG_PCI_HOST_THUNDER_ECAM=y
# CONFIG_PCI_FTPCI100 is not set
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
# CONFIG_PCIE_HISI_ERR is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
CONFIG_PCI_TEGRA=y
# CONFIG_PCIE_RCAR_HOST is not set
CONFIG_PCIE_ROCKCHIP=y
CONFIG_PCIE_ROCKCHIP_HOST=y
CONFIG_PCI_XGENE=y
CONFIG_PCI_XGENE_MSI=y
# CONFIG_PCIE_XILINX is not set
# CONFIG_PCIE_XILINX_DMA_PL is not set
CONFIG_PCIE_XILINX_NWL=y
# CONFIG_PCIE_XILINX_CPM is not set

#
# Cadence-based PCIe controllers
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
# end of Cadence-based PCIe controllers

#
# DesignWare-based PCIe controllers
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
# CONFIG_PCIE_AL is not set
# CONFIG_PCI_MESON is not set
# CONFIG_PCI_IMX6_HOST is not set
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_KIRIN=y
# CONFIG_PCIE_HISI_STB is not set
CONFIG_PCIE_ARMADA_8K=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
CONFIG_PCIE_QCOM=y
# CONFIG_PCIE_RCAR_GEN4_HOST is not set
CONFIG_PCIE_ROCKCHIP_DW_HOST=y
# CONFIG_PCI_KEYSTONE_HOST is not set
# end of DesignWare-based PCIe controllers

#
# Mobiveil-based PCIe controllers
#
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# CONFIG_PCIE_MOBIVEIL_PLAT is not set
# end of Mobiveil-based PCIe controllers
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

CONFIG_CXL_BUS=y
# CONFIG_CXL_PCI is not set
# CONFIG_CXL_ACPI is not set
CONFIG_CXL_PORT=y
CONFIG_CXL_REGION=y
# CONFIG_CXL_REGION_INVALIDATION_TEST is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_DEBUG=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
CONFIG_FW_CACHE=y
CONFIG_FW_UPLOAD=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_GENERIC_ARCH_TOPOLOGY=y
CONFIG_GENERIC_ARCH_NUMA=y
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_ARM_CCI=y
CONFIG_ARM_CCI400_COMMON=y
# CONFIG_MOXTET is not set
CONFIG_HISILICON_LPC=y
# CONFIG_IMX_WEIM is not set
CONFIG_QCOM_EBI2=y
# CONFIG_QCOM_SSC_BLOCK_BUS is not set
CONFIG_SUN50I_DE2_BUS=y
CONFIG_SUNXI_RSB=y
CONFIG_TEGRA_ACONNECT=y
# CONFIG_TEGRA_GMI is not set
CONFIG_TI_SYSC=y
CONFIG_VEXPRESS_CONFIG=y
CONFIG_FSL_MC_BUS=y
CONFIG_FSL_MC_UAPI_SUPPORT=y
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

#
# Cache Drivers
#
# end of Cache Drivers

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
# CONFIG_ARM_SCMI_RAW_MODE_SUPPORT is not set
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
CONFIG_ARM_SCMI_TRANSPORT_SMC=y
# CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE is not set
# CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol

# CONFIG_ARM_SCPI_PROTOCOL is not set
# CONFIG_ARM_SDE_INTERFACE is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_RASPBERRYPI_FIRMWARE=y
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
CONFIG_TI_SCI_PROTOCOL=y
# CONFIG_TURRIS_MOX_RWTM is not set
# CONFIG_ARM_FFA_TRANSPORT is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_CBMEM is not set
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=y
# CONFIG_GOOGLE_MEMCONSOLE_COREBOOT is not set
# CONFIG_GOOGLE_VPD is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_SOFT_RESERVE=y
CONFIG_EFI_PARAMS_FROM_FDT=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB=y
# CONFIG_EFI_ZBOOT is not set
CONFIG_EFI_ARMSTUB_DTB_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_RESET_ATTACK_MITIGATION=y
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_ARM=y
CONFIG_MESON_SM=y
CONFIG_ARM_PSCI_FW=y
# CONFIG_ARM_PSCI_CHECKER is not set

#
# Qualcomm firmware drivers
#
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
# CONFIG_QCOM_QSEECOM is not set
# end of Qualcomm firmware drivers

CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
CONFIG_ARM_SMCCC_SOC_ID=y

#
# Tegra firmware driver
#
# CONFIG_TEGRA_IVC is not set
# end of Tegra firmware driver

#
# Zynq MPSoC Firmware Drivers
#
CONFIG_ZYNQMP_FIRMWARE=y
# CONFIG_ZYNQMP_FIRMWARE_DEBUG is not set
# end of Zynq MPSoC Firmware Drivers
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_NUMA=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_CDROM=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set
# CONFIG_XEN_BLKDEV_BACKEND is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_HWMON=y
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_HOST_AUTH is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HI6421V600_IRQ is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_NSM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# CONFIG_GP_PCI1XXXX is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_HISI_SAS is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_XEN_SCSI_FRONTEND is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support

CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=3
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_DWC=m
# CONFIG_AHCI_IMX is not set
CONFIG_AHCI_CEVA=m
CONFIG_AHCI_MVEBU=m
# CONFIG_AHCI_SUNXI is not set
CONFIG_AHCI_TEGRA=m
CONFIG_AHCI_XGENE=m
CONFIG_AHCI_QORIQ=m
CONFIG_SATA_AHCI_SEATTLE=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_RCAR is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IMX is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_MD_BITMAP_FILE=y
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_ZONED is not set
CONFIG_DM_AUDIT=y
# CONFIG_DM_VDO is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_PFCP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_NETKIT is not set
# CONFIG_NET_VRF is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALLWINNER=y
# CONFIG_SUN4I_EMAC is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_PDS_CORE is not set
# CONFIG_NET_XGENE is not set
# CONFIG_NET_XGENE_V2 is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_CAVIUM_PTP is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FREESCALE=y
# CONFIG_FEC is not set
# CONFIG_FSL_FMAN is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_FSL_XGMAC_MDIO is not set
# CONFIG_GIANFAR is not set
# CONFIG_FSL_DPAA2_SWITCH is not set
# CONFIG_FSL_ENETC is not set
# CONFIG_FSL_ENETC_VF is not set
# CONFIG_FSL_ENETC_IERB is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HISILICON=y
# CONFIG_HIX5HD2_GMAC is not set
# CONFIG_HISI_FEMAC is not set
# CONFIG_HIP04_ETH is not set
# CONFIG_HNS_DSAF is not set
# CONFIG_HNS_ENET is not set
# CONFIG_HNS3 is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=m
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_IDPF is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_ADI=y
# CONFIG_ADIN1110 is not set
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_MVNETA is not set
# CONFIG_MVPP2 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_OCTEONTX2_AF is not set
# CONFIG_OCTEONTX2_PF is not set
# CONFIG_OCTEON_EP is not set
# CONFIG_OCTEON_EP_VF is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
# CONFIG_MLXBF_GIGE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
# CONFIG_LAN966X_SWITCH is not set
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_MSCC_OCELOT_SWITCH is not set
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_SPI is not set
# CONFIG_QCA7000_UART is not set
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_SH_ETH is not set
# CONFIG_RAVB is not set
# CONFIG_RENESAS_ETHER_SWITCH is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC91X is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_SNI_NETSEC is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_DAVINCI_MDIO is not set
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TI_K3_AM65_CPSW_NUSS is not set
# CONFIG_TI_K3_AM65_CPTS is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PSE_CONTROLLER is not set
# CONFIG_MDIO_DEVICE is not set

#
# PCS device drivers
#
# end of PCS device drivers

# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K_PCI=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_WAN is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_XEN_NETDEV_FRONTEND is not set
# CONFIG_XEN_NETDEV_BACKEND is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
# CONFIG_KEYBOARD_IMX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_TEGRA is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_PINEPHONE is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SUN4I_LRADC is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP5 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C is not set
# CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
# CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MSG2638 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS is not set
# CONFIG_TOUCHSCREEN_IMAGIS is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUN4I is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_IQS7211 is not set
# CONFIG_TOUCHSCREEN_ZINITIX is not set
# CONFIG_TOUCHSCREEN_HIMAX_HX83112B is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BBNSM_PWRKEY is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IBM_PANEL is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_INPUT_HISI_POWERKEY is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_AMBAKMI is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_OMAP=y
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y
CONFIG_SERIAL_8250_PERICOM=y
CONFIG_SERIAL_8250_TEGRA=y
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_SERIAL_EARLYCON_SEMIHOST is not set
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_IMX_EARLYCON=y
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=18
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_EARLYCON=y
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_QCOM_GENI=y
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_SPRD is not set
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_HVC_DCC is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_SSIF_IPMI_BMC is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
# CONFIG_HW_RANDOM_BCM2835 is not set
# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
# CONFIG_HW_RANDOM_OMAP is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_HISI is not set
CONFIG_HW_RANDOM_HISTB=y
# CONFIG_HW_RANDOM_XGENE is not set
# CONFIG_HW_RANDOM_MESON is not set
# CONFIG_HW_RANDOM_CAVIUM is not set
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_HW_RANDOM_ARM_SMCCC_TRNG is not set
# CONFIG_HW_RANDOM_CN10K is not set
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
# CONFIG_TCG_TPM2_HMAC is not set
CONFIG_HW_RANDOM_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_SYNQUACER is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_HIX5HD2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_ZHAOXIN is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_BCM2835 is not set
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QCOM_GENI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_THUNDERX is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_XGENE_SLIMPRO is not set
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_SLAVE_TESTUNIT is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AMLOGIC_SPIFC_A1 is not set
# CONFIG_SPI_ARMADA_3700 is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BCM2835 is not set
# CONFIG_SPI_BCM2835AUX is not set
# CONFIG_SPI_BCM_QSPI is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_CADENCE_QUADSPI is not set
# CONFIG_SPI_CADENCE_XSPI is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_FSL_LPSPI is not set
# CONFIG_SPI_FSL_QUADSPI is not set
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_IMX is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_FSL_DSPI is not set
# CONFIG_SPI_MESON_SPICC is not set
# CONFIG_SPI_MESON_SPIFC is not set
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_OMAP24XX is not set
# CONFIG_SPI_ORION is not set
# CONFIG_SPI_PCI1XXXX is not set
# CONFIG_SPI_PL022 is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_ROCKCHIP_SFC is not set
# CONFIG_SPI_RSPI is not set
# CONFIG_SPI_RZV2M_CSI is not set
# CONFIG_SPI_QCOM_QSPI is not set
# CONFIG_SPI_QUP is not set
# CONFIG_SPI_QCOM_GENI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH_HSPI is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_SN_F_OSPI is not set
# CONFIG_SPI_SUN4I is not set
# CONFIG_SPI_SUN6I is not set
# CONFIG_SPI_SYNQUACER is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_TEGRA210_QUAD is not set
# CONFIG_SPI_TEGRA114 is not set
# CONFIG_SPI_TEGRA20_SFLASH is not set
# CONFIG_SPI_TEGRA20_SLINK is not set
# CONFIG_SPI_THUNDERX is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_XLP is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_KVM=y
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_FC3W is not set
# CONFIG_PTP_1588_CLOCK_MOCK is not set
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_AW9523 is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
CONFIG_PINCTRL_MAX77620=y
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_ROCKCHIP=y
# CONFIG_PINCTRL_SCMI is not set
CONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_STMFX is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_ZYNQMP=y
CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX8MM=y
CONFIG_PINCTRL_IMX8MN=y
CONFIG_PINCTRL_IMX8MP=y
CONFIG_PINCTRL_IMX8MQ=y
# CONFIG_PINCTRL_IMX8ULP is not set
# CONFIG_PINCTRL_IMXRT1050 is not set
# CONFIG_PINCTRL_IMX93 is not set
# CONFIG_PINCTRL_IMXRT1170 is not set
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_PINCTRL_MESON_GXL=y
CONFIG_PINCTRL_MESON8_PMX=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_PINCTRL_MESON_AXG_PMX=y
CONFIG_PINCTRL_MESON_G12A=y
CONFIG_PINCTRL_MESON_A1=y
CONFIG_PINCTRL_MESON_S4=y
CONFIG_PINCTRL_AMLOGIC_C3=y
CONFIG_PINCTRL_AMLOGIC_T7=y
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_ARMADA_AP806=y
CONFIG_PINCTRL_ARMADA_CP110=y
CONFIG_PINCTRL_AC5=y
CONFIG_PINCTRL_ARMADA_37XX=y
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_IPQ5018 is not set
# CONFIG_PINCTRL_IPQ5332 is not set
# CONFIG_PINCTRL_IPQ8074 is not set
# CONFIG_PINCTRL_IPQ6018 is not set
# CONFIG_PINCTRL_IPQ9574 is not set
# CONFIG_PINCTRL_MDM9607 is not set
CONFIG_PINCTRL_MSM8916=y
# CONFIG_PINCTRL_MSM8953 is not set
# CONFIG_PINCTRL_MSM8976 is not set
# CONFIG_PINCTRL_MSM8994 is not set
CONFIG_PINCTRL_MSM8996=y
# CONFIG_PINCTRL_MSM8998 is not set
# CONFIG_PINCTRL_QCM2290 is not set
# CONFIG_PINCTRL_QCS404 is not set
# CONFIG_PINCTRL_QDF2XXX is not set
# CONFIG_PINCTRL_QDU1000 is not set
# CONFIG_PINCTRL_SA8775P is not set
# CONFIG_PINCTRL_SC7180 is not set
# CONFIG_PINCTRL_SC7280 is not set
# CONFIG_PINCTRL_SC8180X is not set
# CONFIG_PINCTRL_SC8280XP is not set
# CONFIG_PINCTRL_SDM660 is not set
# CONFIG_PINCTRL_SDM670 is not set
CONFIG_PINCTRL_SDM845=y
# CONFIG_PINCTRL_SDX75 is not set
# CONFIG_PINCTRL_SM4450 is not set
# CONFIG_PINCTRL_SM6115 is not set
# CONFIG_PINCTRL_SM6125 is not set
# CONFIG_PINCTRL_SM6350 is not set
# CONFIG_PINCTRL_SM6375 is not set
# CONFIG_PINCTRL_SM7150 is not set
# CONFIG_PINCTRL_SM8150 is not set
# CONFIG_PINCTRL_SM8250 is not set
# CONFIG_PINCTRL_SM8350 is not set
# CONFIG_PINCTRL_SM8450 is not set
# CONFIG_PINCTRL_SM8550 is not set
# CONFIG_PINCTRL_SM8650 is not set
# CONFIG_PINCTRL_X1E80100 is not set
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
# CONFIG_PINCTRL_LPASS_LPI is not set

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_PFC_R8A774A1=y
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_SUNXI=y
# CONFIG_PINCTRL_SUN4I_A10 is not set
# CONFIG_PINCTRL_SUN5I is not set
# CONFIG_PINCTRL_SUN6I_A31 is not set
# CONFIG_PINCTRL_SUN6I_A31_R is not set
# CONFIG_PINCTRL_SUN8I_A23 is not set
# CONFIG_PINCTRL_SUN8I_A33 is not set
# CONFIG_PINCTRL_SUN8I_A83T is not set
# CONFIG_PINCTRL_SUN8I_A83T_R is not set
# CONFIG_PINCTRL_SUN8I_A23_R is not set
# CONFIG_PINCTRL_SUN8I_H3 is not set
CONFIG_PINCTRL_SUN8I_H3_R=y
# CONFIG_PINCTRL_SUN8I_V3S is not set
# CONFIG_PINCTRL_SUN9I_A80 is not set
# CONFIG_PINCTRL_SUN9I_A80_R is not set
# CONFIG_PINCTRL_SUN20I_D1 is not set
CONFIG_PINCTRL_SUN50I_A64=y
CONFIG_PINCTRL_SUN50I_A64_R=y
CONFIG_PINCTRL_SUN50I_A100=y
CONFIG_PINCTRL_SUN50I_A100_R=y
CONFIG_PINCTRL_SUN50I_H5=y
CONFIG_PINCTRL_SUN50I_H6=y
CONFIG_PINCTRL_SUN50I_H6_R=y
CONFIG_PINCTRL_SUN50I_H616=y
CONFIG_PINCTRL_SUN50I_H616_R=y
CONFIG_PINCTRL_TEGRA=y
CONFIG_PINCTRL_TEGRA124=y
CONFIG_PINCTRL_TEGRA210=y
CONFIG_PINCTRL_TEGRA_XUSB=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_RASPBERRYPI_EXP=y
# CONFIG_GPIO_CADENCE is not set
CONFIG_GPIO_DAVINCI=y
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_FTGPIO010 is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HISI is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_MB86S7X is not set
CONFIG_GPIO_MPC8XXX=y
CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_PL061=y
# CONFIG_GPIO_RCAR is not set
CONFIG_GPIO_ROCKCHIP=y
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_SYSCON is not set
CONFIG_GPIO_TEGRA=y
# CONFIG_GPIO_THUNDERX is not set
# CONFIG_GPIO_VF610 is not set
CONFIG_GPIO_XGENE=y
# CONFIG_GPIO_XGENE_SB is not set
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_XLP=y
# CONFIG_GPIO_ZYNQ is not set
CONFIG_GPIO_ZYNQMP_MODEPIN=y
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_FXL6408 is not set
# CONFIG_GPIO_DS4520 is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_SL28CPLD is not set
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
CONFIG_POWER_RESET_HISI=y
CONFIG_POWER_RESET_MSM=y
# CONFIG_POWER_RESET_ODROID_GO_ULTRA_POWEROFF is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_REGULATOR is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_VEXPRESS=y
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_RT9467 is not set
# CONFIG_CHARGER_RT9471 is not set
# CONFIG_CHARGER_UCS1002 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASUS_ROG_RYUJIN is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ARM_SCMI is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CHIPCAP2 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GIGABYTE_WATERFORCE is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_HS3001 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWERZ is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2991 is not set
# CONFIG_SENSORS_LTC2992 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LTC4282 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_MAX31827 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_KRAKEN3 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PT5161L is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VEXPRESS is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
CONFIG_THERMAL_STATISTICS=y
# CONFIG_THERMAL_DEBUGFS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_DEFAULT_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_FREQ_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_MMIO is not set
# CONFIG_HISI_THERMAL is not set
# CONFIG_IMX_THERMAL is not set
# CONFIG_IMX8MM_THERMAL is not set
# CONFIG_K3_THERMAL is not set
# CONFIG_MAX77620_THERMAL is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_SUN8I_THERMAL is not set
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
# CONFIG_RCAR_GEN3_THERMAL is not set
# CONFIG_RZG2L_THERMAL is not set
# CONFIG_ARMADA_THERMAL is not set
CONFIG_AMLOGIC_THERMAL=y

#
# Broadcom thermal drivers
#
# CONFIG_BCM2711_THERMAL is not set
# CONFIG_BCM2835_THERMAL is not set
# end of Broadcom thermal drivers

#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=y
# end of NVIDIA Tegra thermal drivers

#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_LMH is not set
# end of Qualcomm thermal drivers

CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_XILINX_WINDOW_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_SL28CPLD_WATCHDOG is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
# CONFIG_ARM_SBSA_WATCHDOG is not set
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_K3_RTI_WATCHDOG is not set
# CONFIG_SUNXI_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MAX77620_WATCHDOG is not set
# CONFIG_IMX2_WDT is not set
# CONFIG_IMX7ULP_WDT is not set
# CONFIG_TEGRA_WATCHDOG is not set
# CONFIG_QCOM_WDT is not set
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_ARM_SMC_WATCHDOG is not set
# CONFIG_RENESAS_WDT is not set
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_HP_WATCHDOG is not set
CONFIG_MARVELL_GTI_WDT=y
# CONFIG_BCM2835_WDT is not set
# CONFIG_MEN_A21_WDT is not set
# CONFIG_XEN_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AC100 is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_AXP20X_RSB is not set
# CONFIG_MFD_CS42L43_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_MAX5970 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_MFD_HI6421_SPMI is not set
# CONFIG_MFD_HI655X_PMIC is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_OCELOT is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_QCOM_RPM is not set
# CONFIG_MFD_SPMI_PMIC is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK8XX_I2C is not set
# CONFIG_MFD_RK8XX_SPI is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SL28CPLD=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_MFD_TPS6594_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_QCOM_PM8008 is not set
CONFIG_MFD_VEXPRESS_SYSREG=y
# CONFIG_RAVE_SP_CORE is not set
# CONFIG_MFD_INTEL_M10_BMC_SPI is not set
# CONFIG_MFD_RSMU_I2C is not set
# CONFIG_MFD_RSMU_SPI is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_NETLINK_EVENTS is not set
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_ARM_SCMI is not set
# CONFIG_REGULATOR_AW37503 is not set
# CONFIG_REGULATOR_DA9121 is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_FAN53880 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77503 is not set
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77857 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8893 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX20411 is not set
# CONFIG_REGULATOR_MAX77826 is not set
# CONFIG_REGULATOR_MCP16502 is not set
# CONFIG_REGULATOR_MP5416 is not set
# CONFIG_REGULATOR_MP8859 is not set
# CONFIG_REGULATOR_MP886X is not set
# CONFIG_REGULATOR_MPQ7920 is not set
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_MT6315 is not set
# CONFIG_REGULATOR_PCA9450 is not set
# CONFIG_REGULATOR_PF8X00 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_QCOM_REFGEN is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
# CONFIG_REGULATOR_RAA215300 is not set
# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
# CONFIG_REGULATOR_RT4801 is not set
# CONFIG_REGULATOR_RT4803 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5739 is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6190 is not set
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
# CONFIG_REGULATOR_RTQ2208 is not set
# CONFIG_REGULATOR_SLG51000 is not set
CONFIG_REGULATOR_SUN20I=y
# CONFIG_REGULATOR_SY8106A is not set
# CONFIG_REGULATOR_SY8824X is not set
# CONFIG_REGULATOR_SY8827N is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS6286X is not set
# CONFIG_REGULATOR_TPS6287X is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_VCTRL is not set
# CONFIG_REGULATOR_VEXPRESS is not set
# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set
# CONFIG_REGULATOR_QCOM_LABIBB is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_MESON_AO is not set
# CONFIG_CEC_MESON_G12A_AO is not set
# CONFIG_CEC_TEGRA is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_SCREEN_INFO=y
CONFIG_VIDEO=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_TEGRA_HOST1X is not set
CONFIG_DRM=m
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
CONFIG_DRM_TTM_HELPER=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
# CONFIG_DRM_KOMEDA is not set
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_XE is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_ROCKCHIP is not set
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_RCAR_DU is not set
# CONFIG_DRM_RZG2L_MIPI_DSI is not set
# CONFIG_DRM_SHMOBILE is not set
# CONFIG_DRM_SUN4I is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_VIRTIO_GPU is not set
# CONFIG_DRM_MSM is not set
# CONFIG_DRM_TEGRA is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_ABT_Y030XX067A is not set
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
# CONFIG_DRM_PANEL_AUO_A030JTN01 is not set
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
# CONFIG_DRM_PANEL_INNOLUX_EJ030NA is not set
# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
# CONFIG_DRM_PANEL_NEWVISION_NV3052C is not set
# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_FSL_LDB is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SAMSUNG_DSIM is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE is not set
# CONFIG_DRM_IMX8MP_HDMI_PVI is not set
# CONFIG_DRM_IMX8QM_LDB is not set
# CONFIG_DRM_IMX8QXP_LDB is not set
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
# CONFIG_DRM_IMX93_MIPI_DSI is not set
# end of Display Interface Bridges

# CONFIG_DRM_IMX_DCSS is not set
# CONFIG_DRM_IMX_LCDC is not set
# CONFIG_DRM_V3D is not set
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_HISI_KIRIN is not set
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_IMX_LCDIF is not set
# CONFIG_DRM_MESON is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_XEN_FRONTEND is not set
# CONFIG_DRM_LIMA is not set
# CONFIG_DRM_PANFROST is not set
# CONFIG_DRM_PANTHOR is not set
# CONFIG_DRM_TIDSS is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_POWERVR is not set
# CONFIG_DRM_WERROR is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_IMX is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_XILINX is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DEVICE=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_KTD2801 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_MP3309C is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

# CONFIG_LOGO is not set
# end of Graphics support

# CONFIG_DRM_ACCEL is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_PCMTEST is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_SERIAL_GENERIC is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_TEGRA is not set
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_HDMI is not set
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CS8409 is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=1
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# CONFIG_SND_HDA_CTL_DEV_ID is not set
# end of HD-Audio

CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=2048
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
# CONFIG_SND_SOC is not set
# CONFIG_SND_XEN_FRONTEND is not set
# CONFIG_SND_VIRTIO is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EVISION is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GOOGLE_STADIA_FF is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_WINWING is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2200 is not set
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# HID-BPF support
#
# CONFIG_HID_BPF is not set
# end of HID-BPF support

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# end of USB HID Boot Protocol drivers
# end of USB HID support

CONFIG_I2C_HID=m
# CONFIG_I2C_HID_ACPI is not set
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_LED_TRIG=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_PCI=y
# CONFIG_USB_PCI_AMD is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_DEFAULT_AUTHORIZATION_MODE=1
# CONFIG_USB_MON is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=m
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
# CONFIG_USB_XHCI_MVEBU is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_ORION is not set
# CONFIG_USB_EHCI_TEGRA is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
# CONFIG_USB_XEN_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set

#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_QCOM_EUD is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_LJCA is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ONBOARD_DEV is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_MXS_PHY is not set
# CONFIG_USB_TEGRA_PHY is not set
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=256
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_ARMMMCI is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_MESON_GX is not set
# CONFIG_MMC_MESON_MX_SDIO is not set
# CONFIG_MMC_MXC is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_SDHI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_SH_MMCIF is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_SUNXI is not set
# CONFIG_MMC_CQHCI is not set
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_BCM2835 is not set
# CONFIG_MMC_MTK is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW200XX is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_CR0014114 is not set
# CONFIG_LEDS_EL15203000 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_PCA995X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2606MVV is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_SPI_BYTE is not set
# CONFIG_LEDS_LM3697 is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# end of Speakup console speech

# CONFIG_INFINIBAND is not set
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_GHES is not set
# CONFIG_EDAC_LAYERSCAPE is not set
# CONFIG_EDAC_THUNDERX is not set
# CONFIG_EDAC_SYNOPSYS is not set
# CONFIG_EDAC_XGENE is not set
# CONFIG_EDAC_DMC520 is not set
# CONFIG_EDAC_ZYNQMP is not set
# CONFIG_EDAC_VERSAL is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_MAX31335 is not set
CONFIG_RTC_DRV_MAX77686=y
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=y
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8111 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_EFI=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_IMXDI is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
# CONFIG_RTC_DRV_MESON_VRTC is not set
# CONFIG_RTC_DRV_SH is not set
# CONFIG_RTC_DRV_PL030 is not set
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_SUN6I=y
# CONFIG_RTC_DRV_MV is not set
# CONFIG_RTC_DRV_ARMADA38X is not set
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_TEGRA=y
# CONFIG_RTC_DRV_MXC is not set
# CONFIG_RTC_DRV_MXC_V2 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_BBNSM is not set
CONFIG_RTC_DRV_XGENE=y
# CONFIG_RTC_DRV_R7301 is not set
# CONFIG_RTC_DRV_TI_K3 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_AMBA_PL08X is not set
# CONFIG_AXI_DMAC is not set
CONFIG_DMA_BCM2835=y
# CONFIG_DMA_SUN6I is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_FSL_QDMA is not set
# CONFIG_HISI_DMA is not set
# CONFIG_IMX_DMA is not set
# CONFIG_IMX_SDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_K3_DMA is not set
CONFIG_MV_XOR=y
CONFIG_MV_XOR_V2=y
# CONFIG_MXS_DMA is not set
# CONFIG_PL330_DMA is not set
# CONFIG_PLX_DMA is not set
# CONFIG_TEGRA186_GPC_DMA is not set
CONFIG_TEGRA20_APB_DMA=y
CONFIG_TEGRA210_ADMA=y
# CONFIG_XGENE_DMA is not set
# CONFIG_XILINX_DMA is not set
# CONFIG_XILINX_XDMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
# CONFIG_QCOM_BAM_DMA is not set
# CONFIG_QCOM_GPI_DMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_DW_EDMA is not set
# CONFIG_SF_PDMA is not set
# CONFIG_RCAR_DMAC is not set
# CONFIG_RENESAS_USB_DMAC is not set
CONFIG_TI_K3_UDMA=y
CONFIG_TI_K3_UDMA_GLUE_LAYER=y
CONFIG_TI_K3_PSIL=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options

# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
# CONFIG_NITRO_ENCLAVES is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MEM is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VIRTIO_DEBUG is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_VSOCK is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
# CONFIG_XEN_DEV_EVTCHN is not set
CONFIG_XEN_BACKEND=y
# CONFIG_XENFS is not set
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
# CONFIG_XEN_GRANT_DMA_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
# CONFIG_XEN_PCIDEV_STUB is not set
# CONFIG_XEN_PVCALLS_FRONTEND is not set
# CONFIG_XEN_PVCALLS_BACKEND is not set
# CONFIG_XEN_PRIVCMD is not set
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
# CONFIG_XEN_VIRTIO is not set
# end of Xen driver support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_RTLLIB is not set
# CONFIG_RTS5208 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_MFD_NVEC is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_LTE_GDM724X is not set
# CONFIG_FB_TFT is not set
# CONFIG_KS7010 is not set
CONFIG_BCM_VIDEOCORE=y
# CONFIG_BCM2835_VCHIQ is not set
# CONFIG_SND_BCM2835 is not set
# CONFIG_XIL_AXIS_FIFO is not set
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_VME_BUS is not set
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_ACPI is not set
# CONFIG_CHROMEOS_TBMC is not set
# CONFIG_CROS_EC is not set
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
# CONFIG_CROS_HPS_I2C is not set
# CONFIG_CHROMEOS_PRIVACY_SCREEN is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SURFACE_AGGREGATOR is not set
CONFIG_ARM64_PLATFORM_DEVICES=y
# CONFIG_EC_ACER_ASPIRE1 is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
CONFIG_CLK_VEXPRESS_OSC=y
# end of Clock driver for ARM Reference designs

# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_SI5341=y
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
CONFIG_COMMON_CLK_FSL_SAI=y
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
CONFIG_CLK_QORIQ=y
CONFIG_CLK_LS1028A_PLLDIG=y
CONFIG_COMMON_CLK_XGENE=y
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
# CONFIG_COMMON_CLK_SI521XX is not set
# CONFIG_COMMON_CLK_VC3 is not set
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
CONFIG_CLK_BCM2711_DVP=y
CONFIG_CLK_BCM2835=y
CONFIG_CLK_RASPBERRYPI=y
CONFIG_COMMON_CLK_HI3516CV300=y
CONFIG_COMMON_CLK_HI3519=y
CONFIG_COMMON_CLK_HI3559A=y
CONFIG_COMMON_CLK_HI3660=y
CONFIG_COMMON_CLK_HI3670=y
CONFIG_COMMON_CLK_HI3798CV200=y
CONFIG_COMMON_CLK_HI6220=y
CONFIG_RESET_HISI=y
CONFIG_STUB_CLK_HI6220=y
CONFIG_STUB_CLK_HI3660=y
CONFIG_MXC_CLK=y
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MN=y
CONFIG_CLK_IMX8MP=y
CONFIG_CLK_IMX8MQ=y
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
# CONFIG_CLK_IMX95_BLK_CTL is not set
CONFIG_TI_SCI_CLK=y
# CONFIG_TI_SCI_CLK_PROBE_FROM_FW is not set
CONFIG_TI_SYSCON_CLK=y

#
# Clock support for Amlogic platforms
#
CONFIG_COMMON_CLK_MESON_REGMAP=y
CONFIG_COMMON_CLK_MESON_DUALDIV=y
CONFIG_COMMON_CLK_MESON_MPLL=y
CONFIG_COMMON_CLK_MESON_PLL=y
CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y
CONFIG_COMMON_CLK_MESON_VCLK=y
CONFIG_COMMON_CLK_MESON_CLKC_UTILS=y
CONFIG_COMMON_CLK_MESON_AO_CLKC=y
CONFIG_COMMON_CLK_MESON_EE_CLKC=y
CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y
CONFIG_COMMON_CLK_GXBB=y
CONFIG_COMMON_CLK_AXG=y
# CONFIG_COMMON_CLK_AXG_AUDIO is not set
# CONFIG_COMMON_CLK_A1_PLL is not set
# CONFIG_COMMON_CLK_A1_PERIPHERALS is not set
CONFIG_COMMON_CLK_G12A=y
CONFIG_COMMON_CLK_S4_PLL=y
CONFIG_COMMON_CLK_S4_PERIPHERALS=y
# end of Clock support for Amlogic platforms

CONFIG_ARMADA_AP_CP_HELPER=y
CONFIG_ARMADA_37XX_CLK=y
CONFIG_ARMADA_AP806_SYSCON=y
CONFIG_ARMADA_CP110_SYSCON=y
CONFIG_QCOM_GDSC=y
CONFIG_COMMON_CLK_QCOM=y
# CONFIG_CLK_X1E80100_CAMCC is not set
# CONFIG_CLK_X1E80100_DISPCC is not set
# CONFIG_CLK_X1E80100_GCC is not set
# CONFIG_CLK_X1E80100_GPUCC is not set
# CONFIG_CLK_X1E80100_TCSRCC is not set
# CONFIG_QCOM_A53PLL is not set
# CONFIG_QCOM_A7PLL is not set
# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
CONFIG_QCOM_CLK_RPMH=y
# CONFIG_IPQ_APSS_PLL is not set
# CONFIG_IPQ_GCC_4019 is not set
# CONFIG_IPQ_GCC_5018 is not set
# CONFIG_IPQ_GCC_5332 is not set
# CONFIG_IPQ_GCC_6018 is not set
# CONFIG_IPQ_GCC_8074 is not set
# CONFIG_IPQ_GCC_9574 is not set
CONFIG_MSM_GCC_8916=y
# CONFIG_MSM_GCC_8917 is not set
# CONFIG_MSM_GCC_8939 is not set
# CONFIG_MSM_GCC_8953 is not set
# CONFIG_MSM_GCC_8976 is not set
# CONFIG_MSM_MMCC_8994 is not set
# CONFIG_MSM_GCC_8994 is not set
CONFIG_MSM_GCC_8996=y
CONFIG_MSM_MMCC_8996=y
# CONFIG_MSM_GCC_8998 is not set
# CONFIG_MSM_GPUCC_8998 is not set
# CONFIG_MSM_MMCC_8998 is not set
# CONFIG_QCM_GCC_2290 is not set
# CONFIG_QCM_DISPCC_2290 is not set
# CONFIG_QCS_GCC_404 is not set
# CONFIG_SC_CAMCC_7180 is not set
# CONFIG_SC_CAMCC_7280 is not set
# CONFIG_SC_CAMCC_8280XP is not set
# CONFIG_SC_DISPCC_7180 is not set
# CONFIG_SC_DISPCC_7280 is not set
# CONFIG_SC_DISPCC_8280XP is not set
# CONFIG_SA_GCC_8775P is not set
# CONFIG_SA_GPUCC_8775P is not set
# CONFIG_SC_GCC_7180 is not set
# CONFIG_SC_GCC_7280 is not set
# CONFIG_SC_GCC_8180X is not set
# CONFIG_SC_GCC_8280XP is not set
# CONFIG_SC_GPUCC_7180 is not set
# CONFIG_SC_GPUCC_7280 is not set
# CONFIG_SC_GPUCC_8280XP is not set
# CONFIG_SC_LPASSCC_7280 is not set
# CONFIG_SC_LPASSCC_8280XP is not set
# CONFIG_SC_LPASS_CORECC_7180 is not set
# CONFIG_SC_LPASS_CORECC_7280 is not set
# CONFIG_SC_VIDEOCC_7180 is not set
# CONFIG_SC_VIDEOCC_7280 is not set
# CONFIG_SDM_CAMCC_845 is not set
# CONFIG_SDM_GCC_660 is not set
# CONFIG_SDM_MMCC_660 is not set
# CONFIG_SDM_GPUCC_660 is not set
# CONFIG_QCS_TURING_404 is not set
# CONFIG_QCS_Q6SSTOP_404 is not set
# CONFIG_QDU_GCC_1000 is not set
# CONFIG_QDU_ECPRICC_1000 is not set
CONFIG_SDM_GCC_845=y
# CONFIG_SDM_GPUCC_845 is not set
# CONFIG_SDM_VIDEOCC_845 is not set
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SDM_LPASSCC_845 is not set
# CONFIG_SDX_GCC_75 is not set
# CONFIG_SM_CAMCC_6350 is not set
# CONFIG_SM_CAMCC_8250 is not set
# CONFIG_SM_CAMCC_8450 is not set
# CONFIG_SM_CAMCC_8550 is not set
# CONFIG_SM_DISPCC_8650 is not set
# CONFIG_SM_GCC_4450 is not set
# CONFIG_SM_GCC_6115 is not set
# CONFIG_SM_GCC_6125 is not set
# CONFIG_SM_GCC_6350 is not set
# CONFIG_SM_GCC_6375 is not set
# CONFIG_SM_GCC_7150 is not set
# CONFIG_SM_GCC_8150 is not set
# CONFIG_SM_GCC_8250 is not set
# CONFIG_SM_GCC_8350 is not set
# CONFIG_SM_GCC_8450 is not set
# CONFIG_SM_GCC_8550 is not set
# CONFIG_SM_GCC_8650 is not set
# CONFIG_SM_GPUCC_6115 is not set
# CONFIG_SM_GPUCC_6125 is not set
# CONFIG_SM_GPUCC_6375 is not set
# CONFIG_SM_GPUCC_6350 is not set
# CONFIG_SM_GPUCC_8150 is not set
# CONFIG_SM_GPUCC_8250 is not set
# CONFIG_SM_GPUCC_8350 is not set
# CONFIG_SM_GPUCC_8450 is not set
# CONFIG_SM_GPUCC_8550 is not set
# CONFIG_SM_GPUCC_8650 is not set
# CONFIG_SM_TCSRCC_8550 is not set
# CONFIG_SM_TCSRCC_8650 is not set
# CONFIG_SM_VIDEOCC_8150 is not set
# CONFIG_SM_VIDEOCC_8250 is not set
# CONFIG_SM_VIDEOCC_8350 is not set
# CONFIG_SM_VIDEOCC_8550 is not set
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_QCOM_HFPLL=y
# CONFIG_KPSS_XCC is not set
# CONFIG_CLK_GFM_LPASS_SM8250 is not set
# CONFIG_SM_VIDEOCC_8450 is not set
CONFIG_CLK_RENESAS=y
CONFIG_CLK_R8A774A1=y
CONFIG_CLK_RCAR_CPG_LIB=y
CONFIG_CLK_RCAR_GEN3_CPG=y
# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
CONFIG_CLK_RENESAS_CPG_MSSR=y
CONFIG_CLK_RENESAS_DIV6=y
CONFIG_COMMON_CLK_ROCKCHIP=y
CONFIG_CLK_PX30=y
CONFIG_CLK_RK3308=y
CONFIG_CLK_RK3328=y
CONFIG_CLK_RK3368=y
CONFIG_CLK_RK3399=y
CONFIG_CLK_RK3568=y
CONFIG_CLK_RK3588=y
CONFIG_SUNXI_CCU=y
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_A100_CCU=y
CONFIG_SUN50I_A100_R_CCU=y
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H616_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
CONFIG_SUN6I_RTC_CCU=y
CONFIG_SUN8I_H3_CCU=y
CONFIG_SUN8I_DE2_CCU=y
CONFIG_SUN8I_R_CCU=y
CONFIG_TEGRA_CLK_DFLL=y
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
CONFIG_COMMON_CLK_ZYNQMP=y
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_ACPI=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_ROCKCHIP_TIMER=y
CONFIG_SUN4I_TIMER=y
CONFIG_TEGRA_TIMER=y
# CONFIG_TEGRA186_TIMER is not set
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
CONFIG_FSL_ERRATUM_A008585=y
CONFIG_HISILICON_ERRATUM_161010101=y
CONFIG_ARM64_ERRATUM_858921=y
CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
CONFIG_ARM_TIMER_SP804=y
CONFIG_SYS_SUPPORTS_SH_CMT=y
CONFIG_SYS_SUPPORTS_SH_TMU=y
CONFIG_SH_TIMER_CMT=y
# CONFIG_RENESAS_OSTM is not set
CONFIG_SH_TIMER_TMU=y
CONFIG_TIMER_IMX_SYS_CTR=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
# CONFIG_ARM_MHU is not set
# CONFIG_ARM_MHU_V2 is not set
# CONFIG_ARM_MHU_V3 is not set
# CONFIG_IMX_MBOX is not set
# CONFIG_PLATFORM_MHU is not set
# CONFIG_PL320_MBOX is not set
# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
CONFIG_OMAP2PLUS_MBOX=y
# CONFIG_ROCKCHIP_MBOX is not set
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_BCM2835_MBOX=y
CONFIG_TI_MESSAGE_MANAGER=y
CONFIG_HI3660_MBOX=y
CONFIG_HI6220_MBOX=y
# CONFIG_MAILBOX_TEST is not set
# CONFIG_QCOM_APCS_IPC is not set
# CONFIG_TEGRA_HSP_MBOX is not set
# CONFIG_XGENE_SLIMPRO_MBOX is not set
CONFIG_ZYNQMP_IPI_MBOX=y
CONFIG_SUN6I_MSGBOX=y
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_DART is not set
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
# CONFIG_IOMMUFD is not set
CONFIG_ROCKCHIP_IOMMU=y
# CONFIG_SUN50I_IOMMU is not set
CONFIG_TEGRA_IOMMU_SMMU=y
# CONFIG_IPMMU_VMSA is not set
CONFIG_ARM_SMMU=y
# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
CONFIG_ARM_SMMU_QCOM=y
# CONFIG_ARM_SMMU_QCOM_DEBUG is not set
CONFIG_ARM_SMMU_V3=y
# CONFIG_ARM_SMMU_V3_SVA is not set
CONFIG_QCOM_IOMMU=y
# CONFIG_VIRTIO_IOMMU is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# CONFIG_IMX_REMOTEPROC is not set
# CONFIG_IMX_DSP_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# CONFIG_TI_K3_DSP_REMOTEPROC is not set
# CONFIG_TI_K3_R5_REMOTEPROC is not set
# CONFIG_XLNX_R5_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
CONFIG_MESON_CLK_MEASURE=y
CONFIG_MESON_GX_SOCINFO=y
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_FSL_DPAA is not set
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_MC_DPIO is not set
# CONFIG_DPAA2_CONSOLE is not set
# CONFIG_FSL_RCPM is not set
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# CONFIG_A64FX_DIAG is not set
# end of fujitsu SoC drivers

#
# Hisilicon SoC drivers
#
# CONFIG_KUNPENG_HCCS is not set
# end of Hisilicon SoC drivers

#
# i.MX SoC drivers
#
CONFIG_SOC_IMX8M=y
CONFIG_SOC_IMX9=y
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

# CONFIG_WPCM450_SOC is not set

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
CONFIG_QCOM_KRYO_L2_ACCESSORS=y
# CONFIG_QCOM_OCMEM is not set
# CONFIG_QCOM_RAMP_CTRL is not set
# CONFIG_QCOM_RMTFS_MEM is not set
# CONFIG_QCOM_RPM_MASTER_STATS is not set
CONFIG_QCOM_RPMH=y
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# CONFIG_QCOM_PBS is not set
# end of Qualcomm SoC drivers

CONFIG_SOC_RENESAS=y
CONFIG_ARCH_RCAR_GEN3=y
# CONFIG_ARCH_R8A77995 is not set
# CONFIG_ARCH_R8A77990 is not set
# CONFIG_ARCH_R8A77951 is not set
# CONFIG_ARCH_R8A77965 is not set
# CONFIG_ARCH_R8A77960 is not set
# CONFIG_ARCH_R8A77961 is not set
# CONFIG_ARCH_R8A779F0 is not set
# CONFIG_ARCH_R8A77980 is not set
# CONFIG_ARCH_R8A77970 is not set
# CONFIG_ARCH_R8A779A0 is not set
# CONFIG_ARCH_R8A779G0 is not set
# CONFIG_ARCH_R8A779H0 is not set
# CONFIG_ARCH_R8A774C0 is not set
# CONFIG_ARCH_R8A774E1 is not set
CONFIG_ARCH_R8A774A1=y
# CONFIG_ARCH_R8A774B1 is not set
# CONFIG_ARCH_R9A07G043 is not set
# CONFIG_ARCH_R9A07G044 is not set
# CONFIG_ARCH_R9A07G054 is not set
# CONFIG_ARCH_R9A08G045 is not set
# CONFIG_ARCH_R9A09G011 is not set
# CONFIG_ARCH_R9A09G057 is not set
CONFIG_RST_RCAR=y
CONFIG_ROCKCHIP_GRF=y
# CONFIG_ROCKCHIP_IODOMAIN is not set
CONFIG_SUNXI_MBUS=y
CONFIG_SUNXI_SRAM=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
# CONFIG_ARCH_TEGRA_186_SOC is not set
# CONFIG_ARCH_TEGRA_194_SOC is not set
# CONFIG_ARCH_TEGRA_234_SOC is not set
# CONFIG_ARCH_TEGRA_241_SOC is not set
CONFIG_SOC_TEGRA_FUSE=y
CONFIG_SOC_TEGRA_FLOWCTRL=y
CONFIG_SOC_TEGRA_PMC=y
CONFIG_SOC_TI=y
CONFIG_TI_K3_RINGACC=y
CONFIG_TI_K3_SOCINFO=y
# CONFIG_TI_PRUSS is not set
CONFIG_TI_SCI_INTA_MSI_DOMAIN=y

#
# Xilinx SoC drivers
#
CONFIG_ZYNQMP_POWER=y
CONFIG_XLNX_EVENT_MANAGER=y
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

#
# PM Domains
#

#
# Amlogic PM Domains
#
CONFIG_MESON_GX_PM_DOMAINS=y
CONFIG_MESON_EE_PM_DOMAINS=y
CONFIG_MESON_SECURE_PM_DOMAINS=y
# end of Amlogic PM Domains

CONFIG_ARM_SCMI_PERF_DOMAIN=y
CONFIG_ARM_SCMI_POWER_DOMAIN=y

#
# Broadcom PM Domains
#
CONFIG_BCM2835_POWER=y
CONFIG_RASPBERRYPI_POWER=y
# end of Broadcom PM Domains

#
# i.MX PM Domains
#
CONFIG_IMX_GPCV2_PM_DOMAINS=y
CONFIG_IMX8M_BLK_CTRL=y
CONFIG_IMX9_BLK_CTRL=y
# end of i.MX PM Domains

#
# Qualcomm PM Domains
#
# CONFIG_QCOM_CPR is not set
CONFIG_QCOM_RPMHPD=y
# end of Qualcomm PM Domains

CONFIG_SYSC_RCAR=y
CONFIG_SYSC_R8A774A1=y
CONFIG_ROCKCHIP_PM_DOMAINS=y
# CONFIG_SUN20I_PPU is not set
CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_ZYNQMP_PM_DOMAINS=y
# end of PM Domains

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
# CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_MAX3355 is not set
# CONFIG_EXTCON_PTN5150 is not set
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_MEMORY=y
# CONFIG_ARM_PL172_MPMC is not set
# CONFIG_OMAP_GPMC is not set
# CONFIG_RENESAS_RPCIF is not set
CONFIG_TEGRA_MC=y
# CONFIG_TEGRA210_EMC is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
CONFIG_PWM=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL_TCB is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_DWC is not set
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_OMAP_DMTIMER is not set
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_XILINX is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_PM=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
# CONFIG_AL_FIC is not set
CONFIG_BRCMSTB_L2_IRQ=y
CONFIG_HISILICON_IRQ_MBIGEN=y
CONFIG_RENESAS_IRQC=y
CONFIG_SL28CPLD_INTC=y
CONFIG_SUN6I_R_INTC=y
CONFIG_SUNXI_NMI_INTC=y
# CONFIG_XILINX_INTC is not set
CONFIG_IMX_GPCV2=y
CONFIG_MVEBU_GICP=y
CONFIG_MVEBU_ICU=y
CONFIG_MVEBU_ODMI=y
CONFIG_MVEBU_PIC=y
CONFIG_MVEBU_SEI=y
CONFIG_LS_EXTIRQ=y
CONFIG_LS_SCFG_MSI=y
CONFIG_PARTITION_PERCPU=y
CONFIG_QCOM_IRQ_COMBINER=y
CONFIG_MESON_IRQ_GPIO=y
CONFIG_QCOM_PDC=y
# CONFIG_QCOM_MPM is not set
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
# CONFIG_IMX_MU_MSI is not set
CONFIG_TI_SCI_INTR_IRQCHIP=y
CONFIG_TI_SCI_INTA_IRQCHIP=y
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_GPIO is not set
# CONFIG_RESET_IMX7 is not set
CONFIG_RESET_MESON=y
# CONFIG_RESET_MESON_AUDIO_ARB is not set
CONFIG_RESET_QCOM_AOSS=y
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SUNXI=y
CONFIG_RESET_TI_SCI=y
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set
CONFIG_COMMON_RESET_HI3660=y
CONFIG_COMMON_RESET_HI6220=y

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_XGENE=m
# CONFIG_PHY_CAN_TRANSCEIVER is not set
# CONFIG_PHY_SUN4I_USB is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN9I_USB is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8B_USB2 is not set
CONFIG_PHY_MESON_GXL_USB2=y
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=y
CONFIG_PHY_MESON_G12A_USB2=y
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
CONFIG_PHY_MESON_AXG_PCIE=y
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_CADENCE_TORRENT is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
# CONFIG_PHY_MVEBU_A3700_UTMI is not set
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_LAN966X_SERDES is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
# CONFIG_PHY_OCELOT_SERDES is not set
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_M31_USB is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_SGMII_ETH is not set
# CONFIG_PHY_R8A779F0_ETHERNET_SERDES is not set
# CONFIG_PHY_RCAR_GEN2 is not set
# CONFIG_PHY_RCAR_GEN3_PCIE is not set
# CONFIG_PHY_RCAR_GEN3_USB2 is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DP is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_EMMC is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SAMSUNG_HDPTX is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_ROCKCHIP_USB is not set
# CONFIG_PHY_TEGRA_XUSB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_USB2 is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_ARM_CCI_PMU=y
CONFIG_ARM_CCI400_PMU=y
CONFIG_ARM_CCI5xx_PMU=y
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
CONFIG_ARM_PMU=y
CONFIG_ARM_PMU_ACPI=y
# CONFIG_ARM_SMMU_V3_PMU is not set
CONFIG_ARM_PMUV3=y
# CONFIG_ARM_DSU_PMU is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_FSL_IMX9_DDR_PMU is not set
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
# CONFIG_THUNDERX2_PMU is not set
CONFIG_XGENE_PMU=y
# CONFIG_ARM_SPE_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_MARVELL_CN10K_TAD_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
CONFIG_HISI_PMU=y
# CONFIG_HISI_PCIE_PMU is not set
# CONFIG_HNS3_PMU is not set
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# CONFIG_DWC_PCIE_PMU is not set
# CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU is not set
# CONFIG_MESON_DDR_PMU is not set
# CONFIG_CXL_PMU is not set
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=m
# CONFIG_DEV_DAX is not set
# CONFIG_DEV_DAX_HMEM is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_LAYOUTS=y

#
# Layout Types
#
# CONFIG_NVMEM_LAYOUT_SL28_VPD is not set
# CONFIG_NVMEM_LAYOUT_ONIE_TLV is not set
# end of Layout Types

# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_IMX_OCOTP_ELE is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_MESON_EFUSE is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_NVMEM_SPMI_SDAM is not set
# CONFIG_NVMEM_SUNXI_SID is not set
# CONFIG_NVMEM_ZYNQMP is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_HISI_PTT is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_TEE is not set
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
CONFIG_INTERCONNECT_QCOM=y
CONFIG_INTERCONNECT_QCOM_BCM_VOTER=y
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_QCOM_QDU1000 is not set
CONFIG_INTERCONNECT_QCOM_RPMH_POSSIBLE=y
CONFIG_INTERCONNECT_QCOM_RPMH=y
# CONFIG_INTERCONNECT_QCOM_SA8775P is not set
# CONFIG_INTERCONNECT_QCOM_SC7180 is not set
# CONFIG_INTERCONNECT_QCOM_SC7280 is not set
# CONFIG_INTERCONNECT_QCOM_SC8180X is not set
# CONFIG_INTERCONNECT_QCOM_SC8280XP is not set
# CONFIG_INTERCONNECT_QCOM_SDM670 is not set
CONFIG_INTERCONNECT_QCOM_SDM845=y
# CONFIG_INTERCONNECT_QCOM_SDX55 is not set
# CONFIG_INTERCONNECT_QCOM_SDX65 is not set
# CONFIG_INTERCONNECT_QCOM_SDX75 is not set
# CONFIG_INTERCONNECT_QCOM_SM6350 is not set
# CONFIG_INTERCONNECT_QCOM_SM7150 is not set
# CONFIG_INTERCONNECT_QCOM_SM8150 is not set
# CONFIG_INTERCONNECT_QCOM_SM8250 is not set
# CONFIG_INTERCONNECT_QCOM_SM8350 is not set
# CONFIG_INTERCONNECT_QCOM_SM8450 is not set
# CONFIG_INTERCONNECT_QCOM_SM8550 is not set
# CONFIG_INTERCONNECT_QCOM_SM8650 is not set
# CONFIG_INTERCONNECT_QCOM_X1E80100 is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# CONFIG_CDX_BUS is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_FS_STACK=y
CONFIG_BUFFER_HEAD=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_BCACHEFS_FS is not set
# CONFIG_ZONEFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=m
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
CONFIG_FUSE_PASSTHROUGH=y
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_FAT_DEFAULT_UTF8=y
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS3_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
# CONFIG_TMPFS_QUOTA is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_EFIVAR_FS=m
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_SMB_SERVER is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=32768
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SELINUX_DEBUG is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set
CONFIG_SECURITY_APPARMOR=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
# CONFIG_INTEGRITY_TRUSTED_KEYRING is not set
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_INTEGRITY_MACHINE_KEYRING=y
# CONFIG_INTEGRITY_CA_MACHINE_KEYRING is not set
CONFIG_LOAD_UEFI_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_NG_TEMPLATE is not set
CONFIG_IMA_SIG_TEMPLATE=y
CONFIG_IMA_DEFAULT_TEMPLATE="ima-sig"
# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set
CONFIG_IMA_DEFAULT_HASH_SHA256=y
CONFIG_IMA_DEFAULT_HASH="sha256"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_ARCH_POLICY=y
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
# CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT=y
# CONFIG_IMA_DISABLE_HTABLE is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

#
# Hardening of kernel data structures
#
CONFIG_LIST_HARDENED=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Hardening of kernel data structures

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SIG=y
CONFIG_CRYPTO_SIG2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
# CONFIG_CRYPTO_BLAKE2B is not set
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_POLYVAL=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_XXHASH is not set
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_CRC64_ROCKSOFT=m
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression

#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_JITTERENTROPY is not set
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation

#
# Userspace interface
#
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_NHPOLY1305_NEON is not set
# CONFIG_CRYPTO_CHACHA20_NEON is not set

#
# Accelerated Cryptographic Algorithms for CPU (arm64)
#
CONFIG_CRYPTO_GHASH_ARM64_CE=m
# CONFIG_CRYPTO_POLY1305_NEON is not set
CONFIG_CRYPTO_SHA1_ARM64_CE=m
CONFIG_CRYPTO_SHA256_ARM64=m
CONFIG_CRYPTO_SHA2_ARM64_CE=m
CONFIG_CRYPTO_SHA512_ARM64=m
CONFIG_CRYPTO_SHA512_ARM64_CE=m
CONFIG_CRYPTO_SHA3_ARM64=m
# CONFIG_CRYPTO_SM3_NEON is not set
# CONFIG_CRYPTO_SM3_ARM64_CE is not set
CONFIG_CRYPTO_POLYVAL_ARM64_CE=m
# CONFIG_CRYPTO_AES_ARM64 is not set
CONFIG_CRYPTO_AES_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64_CE_BLK=m
# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
# CONFIG_CRYPTO_AES_ARM64_BS is not set
# CONFIG_CRYPTO_SM4_ARM64_CE is not set
# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
# CONFIG_CRYPTO_AES_ARM64_CE_CCM is not set
# CONFIG_CRYPTO_SM4_ARM64_CE_CCM is not set
# CONFIG_CRYPTO_SM4_ARM64_CE_GCM is not set
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
# end of Accelerated Cryptographic Algorithms for CPU (arm64)

CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
# CONFIG_CRYPTO_DEV_SUN4I_SS is not set
# CONFIG_CRYPTO_DEV_SUN8I_CE is not set
# CONFIG_CRYPTO_DEV_SUN8I_SS is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
# CONFIG_CRYPTO_DEV_SAHARA is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_MXS_DCP is not set
# CONFIG_CAVIUM_CPT is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
# CONFIG_CRYPTO_DEV_OCTEONTX_CPT is not set
# CONFIG_CRYPTO_DEV_OCTEONTX2_CPT is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_420XX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
# CONFIG_CRYPTO_DEV_QCE is not set
# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_HISI_SEC is not set
# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
# CONFIG_CRYPTO_DEV_SA2UL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SECONDARY_TRUSTED_KEYRING_SIGNED_BY_BUILTIN is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_INDIRECT_PIO=y
# CONFIG_TRACE_MMIO_ACCESS is not set

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC64_ROCKSOFT=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_AUDIT_COMPAT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_MICROLZMA is not set
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_FLAGS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_SWIOTLB=y
# CONFIG_SWIOTLB_DYNAMIC is not set
CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC=y
CONFIG_DMA_NEED_SYNC=y
# CONFIG_DMA_RESTRICTED_POOL is not set
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_NUMA_CMA is not set

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_TER16x32=y
# CONFIG_FONT_6x8 is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_MAX_FRAMES=64
CONFIG_SBITMAP=y
# CONFIG_LWQ_TEST is not set
# end of Library routines

CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_FIRMWARE_TABLE=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_ULEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED_NONE=y
# CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_BTF=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y
CONFIG_DEBUG_INFO_BTF_MODULES=y
# CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_PER_VMA_LOCK_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_MEM_ALLOC_PROFILING is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
CONFIG_HAVE_ARCH_KASAN_HW_TAGS=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_WQ_CPU_INTENSIVE_REPORT is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_CPU_STALL_CPUTIME is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_CGROUP_REF is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_RETVAL=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_PROBE_EVENTS_BTF_ARGS=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
# CONFIG_USER_EVENTS is not set
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_RV is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y

#
# arm64 Debugging
#
CONFIG_PID_IN_CONTEXTIDR=y
# CONFIG_DEBUG_EFI is not set
# CONFIG_ARM64_RELOC_TEST is not set
# CONFIG_CORESIGHT is not set
# end of arm64 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
# CONFIG_LKDTM is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_MAPLE_TREE is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_DYNAMIC_DEBUG is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_OBJPOOL is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [PATCH v2 00/25] mm: introduce numa_memblks

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 8458 bytes --]

On 24 Jul 2024, at 18:44, Zi Yan wrote:

> On 23 Jul 2024, at 2:41, Mike Rapoport wrote:
>
>> From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
>>
>> Hi,
>>
>> Following the discussion about handling of CXL fixed memory windows on
>> arm64 [1] I decided to bite the bullet and move numa_memblks from x86 to
>> the generic code so they will be available on arm64/riscv and maybe on
>> loongarch sometime later.
>>
>> While it could be possible to use memblock to describe CXL memory windows,
>> it currently lacks notion of unpopulated memory ranges and numa_memblks
>> does implement this.
>>
>> Another reason to make numa_memblks generic is that both arch_numa (arm64
>> and riscv) and loongarch use trimmed copy of x86 code although there is no
>> fundamental reason why the same code cannot be used on all these platforms.
>> Having numa_memblks in mm/ will make it's interaction with ACPI and FDT
>> more consistent and I believe will reduce maintenance burden.
>>
>> And with generic numa_memblks it is (almost) straightforward to enable NUMA
>> emulation on arm64 and riscv.
>>
>> The first 9 commits in this series are cleanups that are not strictly
>> related to numa_memblks.
>> Commits 10-16 slightly reorder code in x86 to allow extracting numa_memblks
>> and NUMA emulation to the generic code.
>> Commits 17-19 actually move the code from arch/x86/ to mm/ and commits 20-22
>> does some aftermath cleanups.
>> Commit 23 switches arch_numa to numa_memblks.
>> Commit 24 enables usage of phys_to_target_node() and
>> memory_add_physaddr_to_nid() with numa_memblks.
>> Commit 25 moves the description for numa=fake from x86 to admin-guide
>>
>> [1] https://lore.kernel.org/all/20240529171236.32002-1-Jonathan.Cameron@huawei.com/
>>
>> v1: https://lore.kernel.org/all/20240716111346.3676969-1-rppt@kernel.org
>> * add cleanup for arch_alloc_nodedata and HAVE_ARCH_NODEDATA_EXTENSION
>> * add patch that moves description of numa=fake kernel parameter from
>>   x86 to admin-guide
>> * reduce rounding up of node_data allocations from PAGE_SIZE to
>>   SMP_CACHE_BYTES
>> * restore single allocation attempt of numa_distance
>> * fix several comments
>> * added review tags
>>
>> Mike Rapoport (Microsoft) (25):
>>   mm: move kernel/numa.c to mm/
>>   MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
>>   MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
>>   MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
>>   MIPS: loongson64: rename __node_data to node_data
>>   MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
>>   mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
>>   arch, mm: move definition of node_data to generic code
>>   arch, mm: pull out allocation of NODE_DATA to generic code
>>   x86/numa: simplify numa_distance allocation
>>   x86/numa: use get_pfn_range_for_nid to verify that node spans memory
>>   x86/numa: move FAKE_NODE_* defines to numa_emu
>>   x86/numa_emu: simplify allocation of phys_dist
>>   x86/numa_emu: split __apicid_to_node update to a helper function
>>   x86/numa_emu: use a helper function to get MAX_DMA32_PFN
>>   x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
>>   mm: introduce numa_memblks
>>   mm: move numa_distance and related code from x86 to numa_memblks
>>   mm: introduce numa_emulation
>>   mm: numa_memblks: introduce numa_memblks_init
>>   mm: numa_memblks: make several functions and variables static
>>   mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing
>>     meminfo
>>   arch_numa: switch over to numa_memblks
>>   mm: make range-to-target_node lookup facility a part of numa_memblks
>>   docs: move numa=fake description to kernel-parameters.txt
>>
> Hi,
>
> I have tested this series on both x86_64 and arm64. It works fine on x86_64.
> All numa=fake= options work as they did before the series.
>
> But I am not able to boot the kernel (no printout at all) on arm64 VM
> (Mac mini M1 VMWare). By git bisecting, arch_numa: switch over to numa_memblks
> is the first patch causing the boot failure. I see the warning:
>
> WARNING: modpost: vmlinux: section mismatch in reference: numa_add_cpu+0x1c (section: .text) -> early_cpu_to_node (section: .init.text)
>
> I am not sure if it is red herring or not, since changing early_cpu_to_node
> to cpu_to_node in numa_add_cpu() from mm/numa_emulation.c did get rid of the
> warning, but the system still failed to boot.
>
> Please note that you need binutils 2.40 to build the arm64 kernel, since there
> is a bug(https://sourceware.org/bugzilla/show_bug.cgi?id=31924) in 2.42 preventing
> arm64 kernel from booting as well.
>
> My config is attached.

I get more info after adding earlycon to the boot option.
pgdat is NULL, causing issues when free_area_init_node() is dereferencing
it at first WARN_ON.

FYI, my build is this series on top of v6.10 instead of the base commit,
where the series applies cleanly on top v6.10.

[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000ffd82fff]
[    0.000000]   node   0: [mem 0x00000000ffd83000-0x00000000fffb5fff]
[    0.000000]   node   0: [mem 0x00000000fffb6000-0x000000017befffff]
[    0.000000]   node   0: [mem 0x000000017bf00000-0x000000017bfbffff]
[    0.000000]   node   0: [mem 0x000000017bfc0000-0x000000017c02ffff]
[    0.000000]   node   0: [mem 0x000000017c030000-0x000000017c03ffff]
[    0.000000]   node   0: [mem 0x000000017c040000-0x000000017c09ffff]
[    0.000000]   node   0: [mem 0x000000017c0a0000-0x000000017c13ffff]
[    0.000000]   node   0: [mem 0x000000017c140000-0x000000017f41ffff]
[    0.000000]   node   0: [mem 0x000000017f420000-0x000000017f4affff]
[    0.000000]   node   0: [mem 0x000000017f4b0000-0x000000017f5bffff]
[    0.000000]   node   0: [mem 0x000000017f5c0000-0x000000017f5dffff]
[    0.000000]   node   0: [mem 0x000000017f5e0000-0x000000017fffffff]
[    0.000000] pgdat: 0000000000000000, nid: 0
[    0.000000] Unable to handle kernel paging request at virtual address 0000000000002220
[    0.000000] Mem abort info:
[    0.000000]   ESR = 0x0000000096000004
[    0.000000]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.000000]   SET = 0, FnV = 0
[    0.000000]   EA = 0, S1PTW = 0
[    0.000000]   FSC = 0x04: level 0 translation fault
[    0.000000] Data abort info:
[    0.000000]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[    0.000000]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[    0.000000]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[    0.000000] [0000000000002220] user address but active_mm is swapper
[    0.000000] Internal error: Oops: 0000000096000004 [#1] SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0+ #17
[    0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.000000] pc : free_area_init+0x720/0xf90
[    0.000000] lr : free_area_init+0x714/0xf90
[    0.000000] sp : ffff800081eb3c20
[    0.000000] x29: ffff800081eb3c20 x28: 000000017b5e710c x27: ffff800082158000
[    0.000000] x26: 000000017ffff168 x25: ffff800081ecc000 x24: 0000000000000000
[    0.000000] x23: 0000000000000000 x22: 0000000000000000 x21: ffff8000821f0480
[    0.000000] x20: 0000000000000000 x19: ffff8000818863f0 x18: 0000000000000006
[    0.000000] x17: 00000000007fb000 x16: 000000017f805000 x15: ffff800081eb36b0
[    0.000000] x14: 0000000000000000 x13: 30203a64696e202c x12: ffff800081f3ef10
[    0.000000] x11: 0000000000000001 x10: 0000000000000001 x9 : 0000000000017fe8
[    0.000000] x8 : c0000000ffffefff x7 : ffff800081ee6d40 x6 : 0000000000057fa8
[    0.000000] x5 : ffff800081f3eeb8 x4 : 0000000000000000 x3 : 0000000000000000
[    0.000000] x2 : 0000000000000000 x1 : ffff800081ec8c40 x0 : 000000000000001f
[    0.000000] Call trace:
[    0.000000]  free_area_init+0x720/0xf90
[    0.000000]  bootmem_init+0x158/0x218
[    0.000000]  setup_arch+0x220/0x650
[    0.000000]  start_kernel+0x74/0x7e0
[    0.000000]  __primary_switched+0x80/0x90
[    0.000000] Code: 97a64606 b940b7f6 a90dffff f876dab4 (b9622280)
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

--
Best Regards,
Yan, Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [PATCH v2 00/25] mm: introduce numa_memblks

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 6301 bytes --]

On 24 Jul 2024, at 20:35, Zi Yan wrote:

> On 24 Jul 2024, at 18:44, Zi Yan wrote:
>
>> On 23 Jul 2024, at 2:41, Mike Rapoport wrote:
>>
>>> From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
>>>
>>> Hi,
>>>
>>> Following the discussion about handling of CXL fixed memory windows on
>>> arm64 [1] I decided to bite the bullet and move numa_memblks from x86 to
>>> the generic code so they will be available on arm64/riscv and maybe on
>>> loongarch sometime later.
>>>
>>> While it could be possible to use memblock to describe CXL memory windows,
>>> it currently lacks notion of unpopulated memory ranges and numa_memblks
>>> does implement this.
>>>
>>> Another reason to make numa_memblks generic is that both arch_numa (arm64
>>> and riscv) and loongarch use trimmed copy of x86 code although there is no
>>> fundamental reason why the same code cannot be used on all these platforms.
>>> Having numa_memblks in mm/ will make it's interaction with ACPI and FDT
>>> more consistent and I believe will reduce maintenance burden.
>>>
>>> And with generic numa_memblks it is (almost) straightforward to enable NUMA
>>> emulation on arm64 and riscv.
>>>
>>> The first 9 commits in this series are cleanups that are not strictly
>>> related to numa_memblks.
>>> Commits 10-16 slightly reorder code in x86 to allow extracting numa_memblks
>>> and NUMA emulation to the generic code.
>>> Commits 17-19 actually move the code from arch/x86/ to mm/ and commits 20-22
>>> does some aftermath cleanups.
>>> Commit 23 switches arch_numa to numa_memblks.
>>> Commit 24 enables usage of phys_to_target_node() and
>>> memory_add_physaddr_to_nid() with numa_memblks.
>>> Commit 25 moves the description for numa=fake from x86 to admin-guide
>>>
>>> [1] https://lore.kernel.org/all/20240529171236.32002-1-Jonathan.Cameron@huawei.com/
>>>
>>> v1: https://lore.kernel.org/all/20240716111346.3676969-1-rppt@kernel.org
>>> * add cleanup for arch_alloc_nodedata and HAVE_ARCH_NODEDATA_EXTENSION
>>> * add patch that moves description of numa=fake kernel parameter from
>>>   x86 to admin-guide
>>> * reduce rounding up of node_data allocations from PAGE_SIZE to
>>>   SMP_CACHE_BYTES
>>> * restore single allocation attempt of numa_distance
>>> * fix several comments
>>> * added review tags
>>>
>>> Mike Rapoport (Microsoft) (25):
>>>   mm: move kernel/numa.c to mm/
>>>   MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
>>>   MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
>>>   MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
>>>   MIPS: loongson64: rename __node_data to node_data
>>>   MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
>>>   mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
>>>   arch, mm: move definition of node_data to generic code
>>>   arch, mm: pull out allocation of NODE_DATA to generic code
>>>   x86/numa: simplify numa_distance allocation
>>>   x86/numa: use get_pfn_range_for_nid to verify that node spans memory
>>>   x86/numa: move FAKE_NODE_* defines to numa_emu
>>>   x86/numa_emu: simplify allocation of phys_dist
>>>   x86/numa_emu: split __apicid_to_node update to a helper function
>>>   x86/numa_emu: use a helper function to get MAX_DMA32_PFN
>>>   x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
>>>   mm: introduce numa_memblks
>>>   mm: move numa_distance and related code from x86 to numa_memblks
>>>   mm: introduce numa_emulation
>>>   mm: numa_memblks: introduce numa_memblks_init
>>>   mm: numa_memblks: make several functions and variables static
>>>   mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing
>>>     meminfo
>>>   arch_numa: switch over to numa_memblks
>>>   mm: make range-to-target_node lookup facility a part of numa_memblks
>>>   docs: move numa=fake description to kernel-parameters.txt
>>>
>> Hi,
>>
>> I have tested this series on both x86_64 and arm64. It works fine on x86_64.
>> All numa=fake= options work as they did before the series.
>>
>> But I am not able to boot the kernel (no printout at all) on arm64 VM
>> (Mac mini M1 VMWare). By git bisecting, arch_numa: switch over to numa_memblks
>> is the first patch causing the boot failure. I see the warning:
>>
>> WARNING: modpost: vmlinux: section mismatch in reference: numa_add_cpu+0x1c (section: .text) -> early_cpu_to_node (section: .init.text)
>>
>> I am not sure if it is red herring or not, since changing early_cpu_to_node
>> to cpu_to_node in numa_add_cpu() from mm/numa_emulation.c did get rid of the
>> warning, but the system still failed to boot.
>>
>> Please note that you need binutils 2.40 to build the arm64 kernel, since there
>> is a bug(https://sourceware.org/bugzilla/show_bug.cgi?id=31924) in 2.42 preventing
>> arm64 kernel from booting as well.
>>
>> My config is attached.
>
> I get more info after adding earlycon to the boot option.
> pgdat is NULL, causing issues when free_area_init_node() is dereferencing
> it at first WARN_ON.
>
> FYI, my build is this series on top of v6.10 instead of the base commit,
> where the series applies cleanly on top v6.10.

OK, the issue comes from that my arm64 VM has no ACPI but x86_64 VM has it,
thus on arm64 VM numa_init(arch_acpi_numa_ini) failed in arch_numa_init()
and the code falls back to numa_init(dummy_numa_init). In dummy_numa_init(),
before patch 23 "arch_numa: switch over to numa_memblks", numa_add_memblk()
from drivers/base/arch_numa.c is called on arm64, which unconditionally
set 0 to numa_nodes_parsed. This is missing in the x86 version of
numa_add_memblk(), which is now used by all arch. By adding the patch
below, my arm64 kernel boots in the VM.


diff --git a/drivers/base/arch_numa.c b/drivers/base/arch_numa.c
index 806550239d08..354f15b8d9b7 100644
--- a/drivers/base/arch_numa.c
+++ b/drivers/base/arch_numa.c
@@ -279,6 +279,7 @@ static int __init dummy_numa_init(void)
                pr_err("NUMA init failed\n");
                return ret;
        }
+       node_set(0, numa_nodes_parsed);

        numa_off = true;
        return 0;


Feel free to add

Tested-by: Zi Yan <ziy@nvidia.com> # for x86_64 and arm64

after you incorporate the fix.


--
Best Regards,
Yan, Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [PATCH v2 00/25] mm: introduce numa_memblks

[Mike Rapoport]

On Wed, Jul 24, 2024 at 10:48:42PM -0400, Zi Yan wrote:
> On 24 Jul 2024, at 20:35, Zi Yan wrote:
> > On 24 Jul 2024, at 18:44, Zi Yan wrote:
> >>
> >> Hi,
> >>
> >> I have tested this series on both x86_64 and arm64. It works fine on x86_64.
> >> All numa=fake= options work as they did before the series.
> >>
> >> But I am not able to boot the kernel (no printout at all) on arm64 VM
> >> (Mac mini M1 VMWare). By git bisecting, arch_numa: switch over to numa_memblks
> >> is the first patch causing the boot failure. I see the warning:
> >>
> >> WARNING: modpost: vmlinux: section mismatch in reference: numa_add_cpu+0x1c (section: .text) -> early_cpu_to_node (section: .init.text)
> >>
> >> I am not sure if it is red herring or not, since changing early_cpu_to_node
> >> to cpu_to_node in numa_add_cpu() from mm/numa_emulation.c did get rid of the
> >> warning, but the system still failed to boot.
> >>
> >> Please note that you need binutils 2.40 to build the arm64 kernel, since there
> >> is a bug(https://sourceware.org/bugzilla/show_bug.cgi?id=31924) in 2.42 preventing
> >> arm64 kernel from booting as well.
> >>
> >> My config is attached.
> >
> > I get more info after adding earlycon to the boot option.
> > pgdat is NULL, causing issues when free_area_init_node() is dereferencing
> > it at first WARN_ON.
> >
> > FYI, my build is this series on top of v6.10 instead of the base commit,
> > where the series applies cleanly on top v6.10.
> 
> OK, the issue comes from that my arm64 VM has no ACPI but x86_64 VM has it,
> thus on arm64 VM numa_init(arch_acpi_numa_ini) failed in arch_numa_init()
> and the code falls back to numa_init(dummy_numa_init). In dummy_numa_init(),
> before patch 23 "arch_numa: switch over to numa_memblks", numa_add_memblk()
> from drivers/base/arch_numa.c is called on arm64, which unconditionally
> set 0 to numa_nodes_parsed. This is missing in the x86 version of
> numa_add_memblk(), which is now used by all arch. By adding the patch
> below, my arm64 kernel boots in the VM.
> 
> 
> diff --git a/drivers/base/arch_numa.c b/drivers/base/arch_numa.c
> index 806550239d08..354f15b8d9b7 100644
> --- a/drivers/base/arch_numa.c
> +++ b/drivers/base/arch_numa.c
> @@ -279,6 +279,7 @@ static int __init dummy_numa_init(void)
>                 pr_err("NUMA init failed\n");
>                 return ret;
>         }
> +       node_set(0, numa_nodes_parsed);
> 
>         numa_off = true;
>         return 0;
> 
> 
> Feel free to add
> 
> Tested-by: Zi Yan <ziy@nvidia.com> # for x86_64 and arm64
> 
> after you incorporate the fix.

Thanks a lot for testing, debugging and fixing! 
> 
> --
> Best Regards,
> Yan, Zi



-- 
Sincerely yours,
Mike.