[PATCH 2/2] mips: dts: realtek: Add syscon-reboot node

[Chris Packham <chris.packham@alliedtelesis.co.nz>]

The board level reset on systems using the RTL9302 can be driven via the
switch. Use a syscon-reboot node to represent this.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v3:
    - None
    Changes in v2:
    - drop redundant status = "okay"

 arch/mips/boot/dts/realtek/rtl930x.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi
index f271940f82be..cf1b38b6c353 100644
--- a/arch/mips/boot/dts/realtek/rtl930x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi
@@ -29,6 +29,17 @@ lx_clk: clock-175mhz {
 		#clock-cells = <0>;
 		clock-frequency  = <175000000>;
 	};
+
+	switch0: switch@1b000000 {
+		compatible = "realtek,rtl9302c-switch", "syscon", "simple-mfd";
+		reg = <0x1b000000 0x10000>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			offset = <0x0c>;
+			value = <0x01>;
+		};
+	};
 };
 
 &soc {
-- 
2.46.1