linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Dave Ertman" <david.m.ertman@intel.com>,
	"Ira Weiny" <ira.weiny@intel.com>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Danilo Krummrich" <dakr@kernel.org>,
	"Conor Dooley" <conor.dooley@microchip.com>,
	"Daire McNamara" <daire.mcnamara@microchip.com>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Douglas Anderson" <dianders@chromium.org>,
	"Andrzej Hajda" <andrzej.hajda@intel.com>,
	"Neil Armstrong" <neil.armstrong@linaro.org>,
	"Robert Foss" <rfoss@kernel.org>,
	"Laurent Pinchart" <Laurent.pinchart@ideasonboard.com>,
	"Jonas Karlman" <jonas@kwiboo.se>,
	"Jernej Skrabec" <jernej.skrabec@gmail.com>,
	"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Thomas Zimmermann" <tzimmermann@suse.de>,
	"David Airlie" <airlied@gmail.com>,
	"Simona Vetter" <simona@ffwll.ch>,
	"Hans de Goede" <hdegoede@redhat.com>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
	"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
	"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Théo Lebrun" <theo.lebrun@bootlin.com>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Abel Vesa" <abelvesa@kernel.org>, "Peng Fan" <peng.fan@nxp.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Kevin Hilman" <khilman@baylibre.com>,
	"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>
Cc: linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org,
	 dri-devel@lists.freedesktop.org,
	platform-driver-x86@vger.kernel.org,  linux-mips@vger.kernel.org,
	linux-clk@vger.kernel.org, imx@lists.linux.dev,
	 linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org,
	 Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH v4 8/8] clk: amlogic: axg-audio: use the auxiliary reset driver - take 2
Date: Tue, 18 Feb 2025 20:29:53 +0100	[thread overview]
Message-ID: <20250218-aux-device-create-helper-v4-8-c3d7dfdea2e6@baylibre.com> (raw)
In-Reply-To: <20250218-aux-device-create-helper-v4-0-c3d7dfdea2e6@baylibre.com>

Remove the implementation of the reset driver in axg audio
clock driver and migrate to the one provided by reset framework
on the auxiliary bus.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/Kconfig     |   2 +-
 drivers/clk/meson/axg-audio.c | 114 +++++-------------------------------------
 2 files changed, 14 insertions(+), 102 deletions(-)

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index be2e3a5f83363b07cdcec2601acf15780ff24892..7cb21fc223b063cb93812643f02f192343981ed8 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -106,7 +106,7 @@ config COMMON_CLK_AXG_AUDIO
 	select COMMON_CLK_MESON_SCLK_DIV
 	select COMMON_CLK_MESON_CLKC_UTILS
 	select REGMAP_MMIO
-	select RESET_CONTROLLER
+	imply RESET_MESON_AUX
 	help
 	  Support for the audio clock controller on AmLogic A113D devices,
 	  aka axg, Say Y if you want audio subsystem to work.
diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c
index 9df627b142f89788966ede0262aaaf39e13f0b49..3948f5d0faca372dd5cc4ed6dc95f9c89fe5bae8 100644
--- a/drivers/clk/meson/axg-audio.c
+++ b/drivers/clk/meson/axg-audio.c
@@ -4,6 +4,7 @@
  * Author: Jerome Brunet <jbrunet@baylibre.com>
  */
 
+#include <linux/auxiliary_bus.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/init.h>
@@ -12,7 +13,6 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
-#include <linux/reset-controller.h>
 #include <linux/slab.h>
 
 #include "meson-clkc-utils.h"
@@ -1678,84 +1678,6 @@ static struct clk_regmap *const sm1_clk_regmaps[] = {
 	&sm1_earcrx_dmac_clk,
 };
 
-struct axg_audio_reset_data {
-	struct reset_controller_dev rstc;
-	struct regmap *map;
-	unsigned int offset;
-};
-
-static void axg_audio_reset_reg_and_bit(struct axg_audio_reset_data *rst,
-					unsigned long id,
-					unsigned int *reg,
-					unsigned int *bit)
-{
-	unsigned int stride = regmap_get_reg_stride(rst->map);
-
-	*reg = (id / (stride * BITS_PER_BYTE)) * stride;
-	*reg += rst->offset;
-	*bit = id % (stride * BITS_PER_BYTE);
-}
-
-static int axg_audio_reset_update(struct reset_controller_dev *rcdev,
-				unsigned long id, bool assert)
-{
-	struct axg_audio_reset_data *rst =
-		container_of(rcdev, struct axg_audio_reset_data, rstc);
-	unsigned int offset, bit;
-
-	axg_audio_reset_reg_and_bit(rst, id, &offset, &bit);
-
-	regmap_update_bits(rst->map, offset, BIT(bit),
-			assert ? BIT(bit) : 0);
-
-	return 0;
-}
-
-static int axg_audio_reset_status(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct axg_audio_reset_data *rst =
-		container_of(rcdev, struct axg_audio_reset_data, rstc);
-	unsigned int val, offset, bit;
-
-	axg_audio_reset_reg_and_bit(rst, id, &offset, &bit);
-
-	regmap_read(rst->map, offset, &val);
-
-	return !!(val & BIT(bit));
-}
-
-static int axg_audio_reset_assert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	return axg_audio_reset_update(rcdev, id, true);
-}
-
-static int axg_audio_reset_deassert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	return axg_audio_reset_update(rcdev, id, false);
-}
-
-static int axg_audio_reset_toggle(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	int ret;
-
-	ret = axg_audio_reset_assert(rcdev, id);
-	if (ret)
-		return ret;
-
-	return axg_audio_reset_deassert(rcdev, id);
-}
-
-static const struct reset_control_ops axg_audio_rstc_ops = {
-	.assert = axg_audio_reset_assert,
-	.deassert = axg_audio_reset_deassert,
-	.reset = axg_audio_reset_toggle,
-	.status = axg_audio_reset_status,
-};
-
 static struct regmap_config axg_audio_regmap_cfg = {
 	.reg_bits	= 32,
 	.val_bits	= 32,
@@ -1766,8 +1688,7 @@ struct audioclk_data {
 	struct clk_regmap *const *regmap_clks;
 	unsigned int regmap_clk_num;
 	struct meson_clk_hw_data hw_clks;
-	unsigned int reset_offset;
-	unsigned int reset_num;
+	const char *rst_drvname;
 	unsigned int max_register;
 };
 
@@ -1775,7 +1696,7 @@ static int axg_audio_clkc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	const struct audioclk_data *data;
-	struct axg_audio_reset_data *rst;
+	struct auxiliary_device *auxdev;
 	struct regmap *map;
 	void __iomem *regs;
 	struct clk_hw *hw;
@@ -1834,22 +1755,15 @@ static int axg_audio_clkc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/* Stop here if there is no reset */
-	if (!data->reset_num)
-		return 0;
-
-	rst = devm_kzalloc(dev, sizeof(*rst), GFP_KERNEL);
-	if (!rst)
-		return -ENOMEM;
-
-	rst->map = map;
-	rst->offset = data->reset_offset;
-	rst->rstc.nr_resets = data->reset_num;
-	rst->rstc.ops = &axg_audio_rstc_ops;
-	rst->rstc.of_node = dev->of_node;
-	rst->rstc.owner = THIS_MODULE;
+	/* Register auxiliary reset driver when applicable */
+	if (data->rst_drvname) {
+		auxdev = __devm_auxiliary_device_create(dev, dev->driver->name,
+							data->rst_drvname, NULL, 0);
+		if (!auxdev)
+			return -ENODEV;
+	}
 
-	return devm_reset_controller_register(dev, &rst->rstc);
+	return 0;
 }
 
 static const struct audioclk_data axg_audioclk_data = {
@@ -1869,8 +1783,7 @@ static const struct audioclk_data g12a_audioclk_data = {
 		.hws = g12a_audio_hw_clks,
 		.num = ARRAY_SIZE(g12a_audio_hw_clks),
 	},
-	.reset_offset = AUDIO_SW_RESET,
-	.reset_num = 26,
+	.rst_drvname = "rst-g12a",
 	.max_register = AUDIO_CLK_SPDIFOUT_B_CTRL,
 };
 
@@ -1881,8 +1794,7 @@ static const struct audioclk_data sm1_audioclk_data = {
 		.hws = sm1_audio_hw_clks,
 		.num = ARRAY_SIZE(sm1_audio_hw_clks),
 	},
-	.reset_offset = AUDIO_SM1_SW_RESET0,
-	.reset_num = 39,
+	.rst_drvname = "rst-sm1",
 	.max_register = AUDIO_EARCRX_DMAC_CLK_CTRL,
 };
 

-- 
2.47.2


      parent reply	other threads:[~2025-02-18 19:30 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-18 19:29 [PATCH v4 0/8] driver core: auxiliary bus: add device creation helper Jerome Brunet
2025-02-18 19:29 ` [PATCH v4 1/8] driver core: auxiliary bus: add device creation helpers Jerome Brunet
2025-02-19  9:06   ` Dmitry Baryshkov
2025-02-19 10:13     ` Greg Kroah-Hartman
2025-02-19 12:08       ` Dmitry Baryshkov
2025-02-19 13:19         ` Greg Kroah-Hartman
2025-02-19 14:20   ` Greg Kroah-Hartman
2025-04-15 12:52     ` Jerome Brunet
2025-04-15 12:59       ` Greg Kroah-Hartman
2025-04-15 13:10         ` Jerome Brunet
2025-04-15 13:22           ` Greg Kroah-Hartman
2025-02-20 19:14   ` Ira Weiny
2025-02-18 19:29 ` [PATCH v4 2/8] reset: mpfs: use the auxiliary device creation Jerome Brunet
2025-02-19  9:16   ` Philipp Zabel
2025-02-18 19:29 ` [PATCH v4 3/8] drm/bridge: ti-sn65dsi86: use the auxiliary device Jerome Brunet
2025-02-25 16:04   ` Doug Anderson
2025-06-09 13:02     ` Jerome Brunet
2025-06-09 15:43       ` Doug Anderson
2025-06-17  0:13         ` Doug Anderson
2025-02-18 19:29 ` [PATCH v4 4/8] platform: arm64: lenovo-yoga-c630: use the auxiliary device creation helper Jerome Brunet
2025-02-18 19:29 ` [PATCH v4 5/8] clk: eyeq: " Jerome Brunet
2025-02-18 19:29 ` [PATCH v4 6/8] reset: eyeq: drop device_set_of_node_from_dev() done by parent Jerome Brunet
2025-02-19  9:16   ` Philipp Zabel
2025-02-18 19:29 ` [PATCH v4 7/8] clk: clk-imx8mp-audiomix: use the auxiliary device creation helper Jerome Brunet
2025-02-18 19:29 ` Jerome Brunet [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250218-aux-device-create-helper-v4-8-c3d7dfdea2e6@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=abelvesa@kernel.org \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=arnd@arndb.de \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor.dooley@microchip.com \
    --cc=daire.mcnamara@microchip.com \
    --cc=dakr@kernel.org \
    --cc=david.m.ertman@intel.com \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=gregory.clement@bootlin.com \
    --cc=hdegoede@redhat.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=imx@lists.linux.dev \
    --cc=ira.weiny@intel.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel@pengutronix.de \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=neil.armstrong@linaro.org \
    --cc=p.zabel@pengutronix.de \
    --cc=peng.fan@nxp.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=rfoss@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=theo.lebrun@bootlin.com \
    --cc=tzimmermann@suse.de \
    --cc=vladimir.kondratiev@mobileye.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).