[PATCHv2 4/5] dt-bindings: net: wireless: ath9k: add OF bindings

[Rosen Penev <rosenp@gmail.com>]

Now that support was added to the driver, document it.
---
 .../bindings/net/wireless/qca,ath9k.yaml      | 23 ++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
index 0e5412cff2bc..81d00f257922 100644
--- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
@@ -12,7 +12,7 @@ maintainers:
 description: |
   This node provides properties for configuring the ath9k wireless device.
   The node is expected to be specified as a child node of the PCI controller
-  to which the wireless chip is connected.
+  or AHB bus to which the wireless chip is connected.
 
 allOf:
   - $ref: ieee80211.yaml#
@@ -35,6 +35,12 @@ properties:
       - pci168c,0034  # AR9462
       - pci168c,0036  # AR9565
       - pci168c,0037  # AR1111 and AR9485
+      - qca,ar9130-wmac
+      - qca,ar9330-wmac
+      - qca,ar9340-wmac
+      - qca,qca9530-wmac
+      - qca,qca9550-wmac
+      - qca,qca9560-wmac
 
   reg:
     maxItems: 1
@@ -88,3 +94,18 @@ examples:
         nvmem-cell-names = "mac-address", "calibration";
       };
     };
+  - |
+    apb {
+      compatible = "simple-bus";
+      ranges;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      wifi@180c0000 {
+        compatible = "qca,ar9130-wmac";
+        reg = <0x180c0000 0x230000>;
+
+        interrupts = <2>;
+      };
+    };
-- 
2.49.0