From: Rosen Penev <rosenp@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: "Toke Høiland-Jørgensen" <toke@toke.dk>,
nbd@ndb.name, "Johannes Berg" <johannes@sipsolutions.net>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list),
linux-mips@vger.kernel.org (open list:MIPS)
Subject: [PATCHv3 5/5] mips: dts: qca: add wmac support
Date: Thu, 22 May 2025 23:32:07 -0700 [thread overview]
Message-ID: <20250523063207.10040-6-rosenp@gmail.com> (raw)
In-Reply-To: <20250523063207.10040-1-rosenp@gmail.com>
Now that OF ahb support was added to the ath9k driver, we can use it to
enable and use the SoC wireless found in these chipsets.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
arch/mips/boot/dts/qca/ar9132.dtsi | 9 +++++++++
arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 4 ++++
arch/mips/boot/dts/qca/ar9331.dtsi | 9 +++++++++
arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 4 ++++
arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts | 4 ++++
arch/mips/boot/dts/qca/ar9331_omega.dts | 4 ++++
.../mips/boot/dts/qca/ar9331_openembed_som9331_board.dts | 4 ++++
arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts | 4 ++++
8 files changed, 42 insertions(+)
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index aa148d51ab68..47bddd36cd94 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -155,6 +155,15 @@ spi: spi@1f000000 {
#address-cells = <1>;
#size-cells = <0>;
};
+
+ wifi: wifi@180c0000 {
+ compatible = "qcom,ar9130-wifi";
+ reg = <0x180c0000 0x230000>;
+
+ interrupts = <2>;
+
+ status = "disabled";
+ };
};
usb_phy: usb-phy {
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index f894fe17816b..a7901bb040ce 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -108,3 +108,7 @@ partition@2 {
};
};
};
+
+&wifi {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index 768ac0f869b1..9a2590f490bb 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -285,6 +285,15 @@ spi: spi@1f000000 {
status = "disabled";
};
+
+ wifi: wifi@18100000 {
+ compatible = "qcom,ar9330-wifi";
+ reg = <0x18100000 0x20000>;
+
+ interrupts = <2>;
+
+ status = "disabled";
+ };
};
usb_phy: usb-phy {
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
index c857cd22f7db..08e728b8ced8 100644
--- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -97,3 +97,7 @@ &phy_port0 {
&phy_port4 {
status = "okay";
};
+
+&wifi {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
index 7affa58d4fa6..37a74aabe4b4 100644
--- a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -98,3 +98,7 @@ spiflash: w25q128@0 {
reg = <0>;
};
};
+
+&wifi {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts
index 8904aa917a6e..1450419024cb 100644
--- a/arch/mips/boot/dts/qca/ar9331_omega.dts
+++ b/arch/mips/boot/dts/qca/ar9331_omega.dts
@@ -74,3 +74,7 @@ spiflash: w25q128@0 {
reg = <0>;
};
};
+
+&wifi {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
index dc65ebd60bbc..5786a827c000 100644
--- a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
+++ b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
@@ -106,3 +106,7 @@ &phy_port2 {
&phy_port4 {
status = "okay";
};
+
+&wifi {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
index 10b9759228b7..a7108c803eb3 100644
--- a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -114,3 +114,7 @@ spiflash: s25sl032p@0 {
reg = <0>;
};
};
+
+&wifi {
+ status = "okay";
+};
--
2.49.0
prev parent reply other threads:[~2025-05-23 6:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-23 6:32 [PATCHv3 0/5] wifi: ath9k: add ahb OF support Rosen Penev
2025-05-23 6:32 ` [PATCHv3 1/5] wifi: ath9k: ahb: reorder declarations Rosen Penev
2025-05-23 6:32 ` [PATCHv3 2/5] wifi: ath9k: ahb: reorder includes Rosen Penev
2025-05-23 6:32 ` [PATCHv3 3/5] dt-bindings: net: wireless: ath9k: add WIFI bindings Rosen Penev
2025-05-23 6:42 ` Krzysztof Kozlowski
2025-05-24 4:18 ` Rosen Penev
2025-05-23 7:34 ` Rob Herring (Arm)
2025-05-23 6:32 ` [PATCHv3 4/5] wifi: ath9k: ahb: replace id_table with of Rosen Penev
2025-05-23 6:32 ` Rosen Penev [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250523063207.10040-6-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=johannes@sipsolutions.net \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=nbd@ndb.name \
--cc=robh@kernel.org \
--cc=toke@toke.dk \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).