From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtpout-04.galae.net (smtpout-04.galae.net [185.171.202.116]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C64E93DA7DF for ; Wed, 25 Feb 2026 16:54:49 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.171.202.116 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772038491; cv=none; b=Vm6L08CiwsJQ0pMhNjQPbacuGltCl79bbPUcSbxaJkgCoaXzI8A6TMv3zNQX4fXgA29dGne799ASEUXeE7mwzZUZ9VJVR7Z0ftUs/zczp3NEFFbX3wpgE4pNQvsEChdrg476nyoeIQYKaB+gcXpDdDh+/VnYpdAVZlObfXYh6Mc= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772038491; c=relaxed/simple; bh=j9lt66+qyQidpmszRAo3mzBykKBtxR5bZ+aHRmB04Bo=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=eQOoDVXA2OqljGl1w2A9sRDpPMUWinLW0V2kKaGIlXxAdPSmFaifHj1FACUBtzEoIpJjFYBNqIVKLYFjjGLjEI0khL2GWdaaTEaSj6pZx6OpP8MrfEFCdwRGTBfT2jDKDeICQ3BIxXu0caA103rhdQ2v7Oq3Unexzh0kvCQs/C0= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=BJw73SsU; arc=none smtp.client-ip=185.171.202.116 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="BJw73SsU" Received: from smtpout-01.galae.net (smtpout-01.galae.net [212.83.139.233]) by smtpout-04.galae.net (Postfix) with ESMTPS id 2A4E4C40680; Wed, 25 Feb 2026 16:55:03 +0000 (UTC) Received: from mail.galae.net (mail.galae.net [212.83.136.155]) by smtpout-01.galae.net (Postfix) with ESMTPS id 14A705FDE6; Wed, 25 Feb 2026 16:54:48 +0000 (UTC) Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id 305E8103692EC; Wed, 25 Feb 2026 17:54:46 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=dkim; t=1772038487; h=from:subject:date:message-id:to:cc:mime-version:content-type: content-transfer-encoding:in-reply-to:references; bh=Q6Yg5BPdjJMGsJ4MZxD4NMJ59IOnKhCzaTE5HJyzuP0=; b=BJw73SsU1dzEOnIbaac9e+HHSoTzWEpnAqmGNC9IjxaqhvgZW6YYwADN/mMXfqozCf/cgS qBeufGI+rd1aq85zw4PxODXY5wID2NZgiu/FXWe/iZJPQw6y6TqxggCCgIoCvjtMMD8Qfc 0Gds7y3u/uyXNCfHc4BDmR+zh6OyZay6Cc3y3P+Df4lxHtB9eSJb2idk2mYgQmJEhqA0pA 2WFkC4IciZ+ey5M4fZNE2zMALNkEy+WdrcAkgojfHRLu+vQ93Y6KkFsCCKnbjTsafD9adV EcMBOCrYdm227eQG8PHvbIJrA2+PTBSkAqB2VEYswFUzLATGQ3T5Li81v1MR7A== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Wed, 25 Feb 2026 17:54:41 +0100 Subject: [PATCH v7 2/2] phy: Add driver for EyeQ5 Ethernet PHY wrapper Precedence: bulk X-Mailing-List: linux-mips@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Message-Id: <20260225-macb-phy-v7-2-e5211a61db56@bootlin.com> References: <20260225-macb-phy-v7-0-e5211a61db56@bootlin.com> In-Reply-To: <20260225-macb-phy-v7-0-e5211a61db56@bootlin.com> To: Vinod Koul , Neil Armstrong Cc: linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, Vladimir Kondratiev , Gregory CLEMENT , =?utf-8?q?Beno=C3=AEt_Monin?= , Tawfik Bayouk , Thomas Petazzoni , Luca Ceresoli , =?utf-8?q?Th=C3=A9o_Lebrun?= X-Mailer: b4 0.14.3 X-Last-TLS-Session-Version: TLSv1.3 EyeQ5 embeds a system-controller called OLB. It features many unrelated registers, and some of those are registers used to configure the integration of the RGMII/SGMII Cadence PHY used by MACB/GEM instances. Wrap in a neat generic PHY provider, exposing two PHYs with standard phy_init() / phy_set_mode() / phy_power_on() operations. Reviewed-by: Luca Ceresoli Signed-off-by: Théo Lebrun --- MAINTAINERS | 1 + drivers/phy/Kconfig | 13 +++ drivers/phy/Makefile | 1 + drivers/phy/phy-eyeq5-eth.c | 261 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 276 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 55af015174a5..6bc2ae3bbd4b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17812,6 +17812,7 @@ F: arch/mips/boot/dts/mobileye/ F: arch/mips/configs/eyeq5_defconfig F: arch/mips/mobileye/board-epm5.its.S F: drivers/clk/clk-eyeq.c +F: drivers/phy/phy-eyeq5-eth.c F: drivers/pinctrl/pinctrl-eyeq5.c F: drivers/reset/reset-eyeq.c F: include/dt-bindings/clock/mobileye,eyeq5-clk.h diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index c86e90027443..2c9f3272b320 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -67,6 +67,19 @@ config PHY_CAN_TRANSCEIVER functional modes using gpios and sets the attribute max link rate, for CAN drivers. +config PHY_EYEQ5_ETH + tristate "Ethernet PHY Driver on EyeQ5" + depends on OF + depends on MACH_EYEQ5 || COMPILE_TEST + select AUXILIARY_BUS + select GENERIC_PHY + default MACH_EYEQ5 + help + Enable this to support the Ethernet PHY integrated on EyeQ5. + It supports both RGMII and SGMII. Registers are located in a + shared register region called OLB. If M is selected, the + module will be called phy-eyeq5-eth. + config PHY_GOOGLE_USB tristate "Google Tensor SoC USB PHY driver" select GENERIC_PHY diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 4c07926bc47b..57178c17752c 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o obj-$(CONFIG_PHY_AIROHA_PCIE) += phy-airoha-pcie.o obj-$(CONFIG_PHY_CAN_TRANSCEIVER) += phy-can-transceiver.o +obj-$(CONFIG_PHY_EYEQ5_ETH) += phy-eyeq5-eth.o obj-$(CONFIG_PHY_GOOGLE_USB) += phy-google-usb.o obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o obj-$(CONFIG_PHY_NXP_PTN3222) += phy-nxp-ptn3222.o diff --git a/drivers/phy/phy-eyeq5-eth.c b/drivers/phy/phy-eyeq5-eth.c new file mode 100644 index 000000000000..883ae82d9434 --- /dev/null +++ b/drivers/phy/phy-eyeq5-eth.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define EQ5_PHY_COUNT 2 + +#define EQ5_PHY0_GP 0x128 +#define EQ5_PHY1_GP 0x12c +#define EQ5_PHY0_SGMII 0x134 +#define EQ5_PHY1_SGMII 0x138 + +#define EQ5_GP_TX_SWRST_DIS BIT(0) // Tx SW reset +#define EQ5_GP_TX_M_CLKE BIT(1) // Tx M clock enable +#define EQ5_GP_SYS_SWRST_DIS BIT(2) // Sys SW reset +#define EQ5_GP_SYS_M_CLKE BIT(3) // Sys clock enable +#define EQ5_GP_SGMII_MODE BIT(4) // SGMII mode +#define EQ5_GP_RGMII_DRV GENMASK(8, 5) // RGMII drive strength + +#define EQ5_SGMII_PWR_EN BIT(0) +#define EQ5_SGMII_RST_DIS BIT(1) +#define EQ5_SGMII_PLL_EN BIT(2) +#define EQ5_SGMII_SIG_DET_SW BIT(3) +#define EQ5_SGMII_PWR_STATE BIT(4) +#define EQ5_SGMII_PLL_ACK BIT(18) +#define EQ5_SGMII_PWR_STATE_ACK GENMASK(24, 20) + +struct eq5_phy_inst { + struct device *dev; + struct phy *phy; + void __iomem *gp, *sgmii; + phy_interface_t phy_interface; + bool sgmii_support; +}; + +struct eq5_phy_private { + struct eq5_phy_inst phys[EQ5_PHY_COUNT]; +}; + +static int eq5_phy_exit(struct phy *phy) +{ + struct eq5_phy_inst *inst = phy_get_drvdata(phy); + + writel(0, inst->gp); + writel(0, inst->sgmii); + udelay(5); /* settling time */ + return 0; +} + +static int eq5_phy_init(struct phy *phy) +{ + struct eq5_phy_inst *inst = phy_get_drvdata(phy); + u32 reg; + + /* + * Hardware stops listening to our instructions once it is started. + * It must be reset to reconfigure it. + */ + eq5_phy_exit(phy); + + reg = EQ5_GP_TX_SWRST_DIS | EQ5_GP_TX_M_CLKE | + EQ5_GP_SYS_SWRST_DIS | EQ5_GP_SYS_M_CLKE | + FIELD_PREP(EQ5_GP_RGMII_DRV, 0x9); + writel(reg, inst->gp); + + return 0; +} + +static int eq5_phy_power_on(struct phy *phy) +{ + struct eq5_phy_inst *inst = phy_get_drvdata(phy); + u32 reg; + + if (inst->phy_interface == PHY_INTERFACE_MODE_SGMII) { + writel(readl(inst->gp) | EQ5_GP_SGMII_MODE, inst->gp); + + reg = EQ5_SGMII_PWR_EN | EQ5_SGMII_RST_DIS | EQ5_SGMII_PLL_EN; + writel(reg, inst->sgmii); + + if (readl_poll_timeout(inst->sgmii, reg, + reg & EQ5_SGMII_PLL_ACK, 1, 100)) { + dev_err(inst->dev, "PLL timeout\n"); + return -ETIMEDOUT; + } + + reg = readl(inst->sgmii); + reg |= EQ5_SGMII_PWR_STATE | EQ5_SGMII_SIG_DET_SW; + writel(reg, inst->sgmii); + } else { + writel(readl(inst->gp) & ~EQ5_GP_SGMII_MODE, inst->gp); + writel(0, inst->sgmii); + } + + return 0; +} + +static int eq5_phy_power_off(struct phy *phy) +{ + struct eq5_phy_inst *inst = phy_get_drvdata(phy); + + writel(readl(inst->gp) & ~EQ5_GP_SGMII_MODE, inst->gp); + writel(0, inst->sgmii); + + return 0; +} + +static int eq5_phy_validate(struct phy *phy, enum phy_mode mode, int submode, + union phy_configure_opts *opts) +{ + struct eq5_phy_inst *inst = phy_get_drvdata(phy); + + if (mode != PHY_MODE_ETHERNET) + return -EINVAL; + + if (phy_interface_mode_is_rgmii(submode)) + return 0; + + if (inst->sgmii_support && submode == PHY_INTERFACE_MODE_SGMII) + return 0; + + return -EINVAL; +} + +static int eq5_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode) +{ + struct eq5_phy_inst *inst = phy_get_drvdata(phy); + + if (eq5_phy_validate(phy, mode, submode, NULL)) + return -EOPNOTSUPP; + + if (submode == inst->phy_interface) + return 0; + + inst->phy_interface = submode; + + if (phy->power_count) { + eq5_phy_init(phy); + return eq5_phy_power_on(phy); + } + + return 0; +} + +static const struct phy_ops eq5_phy_ops = { + .init = eq5_phy_init, + .exit = eq5_phy_exit, + .power_on = eq5_phy_power_on, + .power_off = eq5_phy_power_off, + .set_mode = eq5_phy_set_mode, + .validate = eq5_phy_validate, +}; + +static struct phy *eq5_phy_xlate(struct device *dev, + const struct of_phandle_args *args) +{ + struct eq5_phy_private *priv = dev_get_drvdata(dev); + + if (args->args_count != 1 || args->args[0] >= EQ5_PHY_COUNT) + return ERR_PTR(-EINVAL); + + return priv->phys[args->args[0]].phy; +} + +static int eq5_phy_probe_phy(struct device *dev, struct eq5_phy_private *priv, + unsigned int index, void __iomem *base, + unsigned int gp, unsigned int sgmii, + bool sgmii_support) +{ + struct eq5_phy_inst *inst = &priv->phys[index]; + struct phy *phy; + + phy = devm_phy_create(dev, dev->of_node, &eq5_phy_ops); + if (IS_ERR(phy)) + return dev_err_probe(dev, PTR_ERR(phy), + "failed to create PHY %u\n", index); + + inst->dev = dev; + inst->phy = phy; + inst->gp = base + gp; + inst->sgmii = base + sgmii; + inst->sgmii_support = sgmii_support; + phy_set_drvdata(phy, inst); + + /* + * Init inst->phy_interface based on probe hardware state, allowing + * consumers to power us on without first setting the mode. + */ + if (sgmii_support && (readl(inst->gp) & EQ5_GP_SGMII_MODE)) + inst->phy_interface = PHY_INTERFACE_MODE_SGMII; + else + inst->phy_interface = PHY_INTERFACE_MODE_RGMII; + + return 0; +} + +static int eq5_phy_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct device *dev = &adev->dev; + struct phy_provider *provider; + struct eq5_phy_private *priv; + void __iomem *base; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + + base = dev_get_platdata(dev); + + ret = eq5_phy_probe_phy(dev, priv, 0, base, EQ5_PHY0_GP, + EQ5_PHY0_SGMII, true); + if (ret) + return ret; + + ret = eq5_phy_probe_phy(dev, priv, 1, base, EQ5_PHY1_GP, + EQ5_PHY1_SGMII, false); + if (ret) + return ret; + + provider = devm_of_phy_provider_register(dev, eq5_phy_xlate); + if (IS_ERR(provider)) + return dev_err_probe(dev, PTR_ERR(provider), + "registering provider failed\n"); + + return 0; +} + +static const struct auxiliary_device_id eq5_phy_id_table[] = { + { .name = "clk_eyeq.phy" }, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, eq5_phy_id_table); + +static struct auxiliary_driver eq5_phy_driver = { + .probe = eq5_phy_probe, + .id_table = eq5_phy_id_table, +}; +module_auxiliary_driver(eq5_phy_driver); + +MODULE_DESCRIPTION("EyeQ5 Ethernet PHY driver"); +MODULE_AUTHOR("Théo Lebrun "); +MODULE_LICENSE("GPL"); -- 2.53.0