Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: "Benoît Monin" <benoit.monin@bootlin.com>
To: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Théo Lebrun" <theo.lebrun@bootlin.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Brian Masney" <bmasney@redhat.com>,
	"Philipp Zabel" <p.zabel@pengutronix.de>
Cc: "Benoît Monin" <benoit.monin@bootlin.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH v6 3/9] clk: fixed-factor: Rework initialization with parent clocks
Date: Tue, 12 May 2026 15:27:02 +0200	[thread overview]
Message-ID: <20260512-clk-eyeq7-v6-3-0540cce18fb2@bootlin.com> (raw)
In-Reply-To: <20260512-clk-eyeq7-v6-0-0540cce18fb2@bootlin.com>

Use the same sequence as clk-divider, clk-gate and other to set the
parent_names, parent_hws and parent_data in the init struct when
registering a fixed-factor clock. The number of parent clocks is now
only set to one if a parent clock is provided.

Previously the number of parent clocks was always one, forcing callers
of __clk_hw_register_fixed_factor() to provide a dummy parent_data
struct with an invalid clock index in case they were not provided with
a non-NULL parent_name or parent_hw. Drop this dummy parent_data as is
not necessary anymore.

This change only has a small impact on mis-configured fixed-factor. Now a
call to clk_hw_register_fixed_factor() with a NULL parent will register
a fixed-factor with zero parent while previously it was registered with
one invalid parent. In both cases the rate of the fixed-factor is 0Hz
but it is no longer shown as orphaned.

This has no impact on properly configured fixed-factors clocks.

Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
---
 drivers/clk/clk-fixed-factor.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index 850e8b95f352..359e91441c74 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -124,13 +124,13 @@ __clk_hw_register_fixed_factor(struct device *dev, struct device_node *np,
 	init.name = name;
 	init.ops = &clk_fixed_factor_ops;
 	init.flags = flags;
-	if (parent_name)
-		init.parent_names = &parent_name;
-	else if (parent_hw)
-		init.parent_hws = &parent_hw;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.parent_hws = parent_hw ? &parent_hw : NULL;
+	init.parent_data = pdata;
+	if (parent_name || parent_hw || pdata)
+		init.num_parents = 1;
 	else
-		init.parent_data = pdata;
-	init.num_parents = 1;
+		init.num_parents = 0;
 
 	hw = &fix->hw;
 	if (dev)
@@ -190,10 +190,8 @@ struct clk_hw *devm_clk_hw_register_fixed_factor_parent_hw(struct device *dev,
 		const char *name, const struct clk_hw *parent_hw,
 		unsigned long flags, unsigned int mult, unsigned int div)
 {
-	const struct clk_parent_data pdata = { .index = -1 };
-
 	return __clk_hw_register_fixed_factor(dev, NULL, name, NULL, parent_hw,
-					      &pdata, flags, mult, div, 0, 0, true);
+					      NULL, flags, mult, div, 0, 0, true);
 }
 EXPORT_SYMBOL_GPL(devm_clk_hw_register_fixed_factor_parent_hw);
 
@@ -201,10 +199,8 @@ struct clk_hw *clk_hw_register_fixed_factor_parent_hw(struct device *dev,
 		const char *name, const struct clk_hw *parent_hw,
 		unsigned long flags, unsigned int mult, unsigned int div)
 {
-	const struct clk_parent_data pdata = { .index = -1 };
-
 	return __clk_hw_register_fixed_factor(dev, NULL, name, NULL, parent_hw,
-					      &pdata, flags, mult, div, 0, 0, false);
+					      NULL, flags, mult, div, 0, 0, false);
 }
 EXPORT_SYMBOL_GPL(clk_hw_register_fixed_factor_parent_hw);
 
@@ -212,10 +208,8 @@ struct clk_hw *clk_hw_register_fixed_factor(struct device *dev,
 		const char *name, const char *parent_name, unsigned long flags,
 		unsigned int mult, unsigned int div)
 {
-	const struct clk_parent_data pdata = { .index = -1 };
-
 	return __clk_hw_register_fixed_factor(dev, NULL, name, parent_name, NULL,
-					      &pdata, flags, mult, div, 0, 0, false);
+					      NULL, flags, mult, div, 0, 0, false);
 }
 EXPORT_SYMBOL_GPL(clk_hw_register_fixed_factor);
 
@@ -296,10 +290,8 @@ struct clk_hw *devm_clk_hw_register_fixed_factor(struct device *dev,
 		const char *name, const char *parent_name, unsigned long flags,
 		unsigned int mult, unsigned int div)
 {
-	const struct clk_parent_data pdata = { .index = -1 };
-
 	return __clk_hw_register_fixed_factor(dev, NULL, name, parent_name, NULL,
-			&pdata, flags, mult, div, 0, 0, true);
+			NULL, flags, mult, div, 0, 0, true);
 }
 EXPORT_SYMBOL_GPL(devm_clk_hw_register_fixed_factor);
 

-- 
2.54.0


  parent reply	other threads:[~2026-05-12 13:27 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-12 13:26 [PATCH v6 0/9] Add clock and reset support for Mobileye EyeQ7H Benoît Monin
2026-05-12 13:27 ` [PATCH v6 1/9] dt-bindings: soc: mobileye: Add EyeQ7H OLB Benoît Monin
2026-05-12 13:27 ` [PATCH v6 2/9] reset: eyeq: Add EyeQ7H compatibles Benoît Monin
2026-05-12 13:27 ` Benoît Monin [this message]
2026-05-12 13:27 ` [PATCH v6 4/9] clk: fixed-factor: Export __clk_hw_register_fixed_factor() Benoît Monin
2026-05-12 13:27 ` [PATCH v6 5/9] clk: eyeq: Prefix the PLL registers with the PLL type Benoît Monin
2026-05-12 13:27 ` [PATCH v6 6/9] clk: eyeq: Introduce a generic clock type Benoît Monin
2026-05-12 13:27 ` [PATCH v6 7/9] clk: eyeq: Convert clocks declaration to eqc_clock Benoît Monin
2026-05-12 13:27 ` [PATCH v6 8/9] clk: eyeq: Drop PLL, dividers, and fixed factors structs Benoît Monin
2026-05-12 13:27 ` [PATCH v6 9/9] clk: eyeq: Add EyeQ7H compatibles Benoît Monin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260512-clk-eyeq7-v6-3-0540cce18fb2@bootlin.com \
    --to=benoit.monin@bootlin.com \
    --cc=bmasney@redhat.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=theo.lebrun@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vladimir.kondratiev@mobileye.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox