From: Ethan Nelson-Moore <enelsonmoore@gmail.com>
To: linux-mips@vger.kernel.org
Cc: Ethan Nelson-Moore <enelsonmoore@gmail.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Subject: [PATCH] MIPS: remove unused <asm/mips-boards/sead3-addr.h> header
Date: Thu, 17 Sep 2026 20:00:35 -0700 [thread overview]
Message-ID: <20260918030041.397914-1-enelsonmoore@gmail.com> (raw)
The last use of arch/mips/include/asm/mips-boards/sead3-addr.h was
removed in commit 64601cb1343f ("leds: Remove SEAD-3 driver") but it
was left behind. Remove it.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
---
.../mips/include/asm/mips-boards/sead3-addr.h | 83 -------------------
1 file changed, 83 deletions(-)
delete mode 100644 arch/mips/include/asm/mips-boards/sead3-addr.h
diff --git a/arch/mips/include/asm/mips-boards/sead3-addr.h b/arch/mips/include/asm/mips-boards/sead3-addr.h
deleted file mode 100644
index c0db57802f7c..000000000000
--- a/arch/mips/include/asm/mips-boards/sead3-addr.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2015 Imagination Technologies, Inc.
- * written by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_BOARDS_SEAD3_ADDR_H
-#define __ASM_MIPS_BOARDS_SEAD3_ADDR_H
-
-/*
- * Target #0 Register Decode
- */
-#define SEAD3_SD_SPDCNF 0xbb000040
-#define SEAD3_SD_SPADDR 0xbb000048
-#define SEAD3_SD_DATA 0xbb000050
-
-/*
- * Target #1 Register Decode
- */
-#define SEAD3_CFG 0xbb100110
-#define SEAD3_GIC_BASE_ADDRESS 0xbb1c0000
-#define SEAD3_SHARED_SECTION 0xbb1c0000
-#define SEAD3_VPE_LOCAL_SECTION 0xbb1c8000
-#define SEAD3_VPE_OTHER_SECTION 0xbb1cc000
-#define SEAD3_USER_MODE_VISIBLE_SECTION 0xbb1d0000
-
-/*
- * Target #3 Register Decode
- */
-#define SEAD3_USB_HS_BASE 0xbb200000
-#define SEAD3_USB_HS_IDENTIFICATION_REGS 0xbb200000
-#define SEAD3_USB_HS_CAPABILITY_REGS 0xbb200100
-#define SEAD3_USB_HS_OPERATIONAL_REGS 0xbb200140
-#define SEAD3_RESERVED 0xbe800000
-
-/*
- * Target #3 Register Decode
- */
-#define SEAD3_SRAM 0xbe000000
-#define SEAD3_OPTIONAL_SRAM 0xbe400000
-#define SEAD3_FPGA 0xbf000000
-
-#define SEAD3_PI_PIC32_USB_STATUS 0xbf000060
-#define SEAD3_PI_PIC32_USB_STATUS_IO_RDY (1 << 0)
-#define SEAD3_PI_PIC32_USB_STATUS_SPL_INT (1 << 1)
-#define SEAD3_PI_PIC32_USB_STATUS_GPIOA_INT (1 << 2)
-#define SEAD3_PI_PIC32_USB_STATUS_GPIOB_INT (1 << 3)
-
-#define SEAD3_PI_SOFT_ENDIAN 0xbf000070
-
-#define SEAD3_CPLD_P_SWITCH 0xbf000200
-#define SEAD3_CPLD_F_SWITCH 0xbf000208
-#define SEAD3_CPLD_P_LED 0xbf000210
-#define SEAD3_CPLD_F_LED 0xbf000218
-#define SEAD3_NEWSC_LIVE 0xbf000220
-#define SEAD3_NEWSC_REG 0xbf000228
-#define SEAD3_NEWSC_CTRL 0xbf000230
-
-#define SEAD3_LCD_CONTROL 0xbf000400
-#define SEAD3_LCD_DATA 0xbf000408
-#define SEAD3_CPLD_LCD_STATUS 0xbf000410
-#define SEAD3_CPLD_LCD_DATA 0xbf000418
-
-#define SEAD3_CPLD_PI_DEVRST 0xbf000480
-#define SEAD3_CPLD_PI_DEVRST_IC32_RST (1 << 0)
-#define SEAD3_RESERVED_0 0xbf000500
-
-#define SEAD3_PIC32_REGISTERS 0xbf000600
-#define SEAD3_RESERVED_1 0xbf000700
-#define SEAD3_UART_CH_0 0xbf000800
-#define SEAD3_UART_CH_1 0xbf000900
-#define SEAD3_RESERVED_2 0xbf000a00
-#define SEAD3_ETHERNET 0xbf010000
-#define SEAD3_RESERVED_3 0xbf020000
-#define SEAD3_USER_EXPANSION 0xbf400000
-#define SEAD3_RESERVED_4 0xbf800000
-#define SEAD3_BOOT_FLASH_EXTENSION 0xbfa00000
-#define SEAD3_BOOT_FLASH 0xbfc00000
-#define SEAD3_REVISION_REGISTER 0xbfc00010
-
-#endif /* __ASM_MIPS_BOARDS_SEAD3_ADDR_H */
--
2.43.0
next reply other threads:[~2026-09-18 3:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 3:00 Ethan Nelson-Moore [this message]
2026-09-26 9:38 ` [PATCH] MIPS: remove unused <asm/mips-boards/sead3-addr.h> header Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260918030041.397914-1-enelsonmoore@gmail.com \
--to=enelsonmoore@gmail.com \
--cc=linux-mips@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox