From: Imre Kaloz <kaloz@kernel.org>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>, netdev@vger.kernel.org
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org, Sashiko <sashiko-bot@kernel.org>
Subject: [PATCH net 2/2] net: sgi: ioc3-eth: fix IRQ lifetime against netdev teardown
Date: Mon, 16 Nov 2026 11:19:34 +0100 [thread overview]
Message-ID: <20261116101934.25910-3-kaloz@kernel.org> (raw)
In-Reply-To: <20261116101934.25910-1-kaloz@kernel.org>
The shared IRQ is requested before the lock and timer its handler
uses are initialized, and stays registered past free_netdev() on the
probe error paths and in remove, so the handler can run on freed
memory.
Reproduced with CONFIG_DEBUG_SHIRQ=y and slub_debug=P and tested on
an SGI Fuel.
Fixes: 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/179473760071.2199510.16065103101920438822@kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Imre Kaloz <kaloz@kernel.org>
---
drivers/net/ethernet/sgi/ioc3-eth.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index ee284a4f75ff..e322a588d5c4 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -870,16 +870,16 @@ static int ioc3eth_probe(struct platform_device *pdev)
goto out_free;
}
- if (devm_request_irq(&pdev->dev, dev->irq, ioc3_interrupt,
- IRQF_SHARED, "ioc3-eth", dev)) {
+ spin_lock_init(&ip->ioc3_lock);
+ timer_setup(&ip->ioc3_timer, ioc3_timer, 0);
+
+ if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, "ioc3-eth",
+ dev)) {
dev_err(&pdev->dev, "Can't get irq %d\n", dev->irq);
err = -ENODEV;
goto out_free;
}
- spin_lock_init(&ip->ioc3_lock);
- timer_setup(&ip->ioc3_timer, ioc3_timer, 0);
-
ioc3_stop(ip);
/* Allocate rx ring. 4kb = 512 entries, must be 4kb aligned */
@@ -951,6 +951,7 @@ static int ioc3eth_probe(struct platform_device *pdev)
return 0;
out_stop:
+ free_irq(dev->irq, dev);
timer_delete_sync(&ip->ioc3_timer);
if (ip->rxr)
dma_free_coherent(ip->dma_dev, RX_RING_SIZE, ip->rxr,
@@ -969,6 +970,7 @@ static void ioc3eth_remove(struct platform_device *pdev)
struct ioc3_private *ip = netdev_priv(dev);
unregister_netdev(dev);
+ free_irq(dev->irq, dev);
timer_delete_sync(&ip->ioc3_timer);
dma_free_coherent(ip->dma_dev, RX_RING_SIZE, ip->rxr, ip->rxr_dma);
--
2.47.3
prev parent reply other threads:[~2026-11-16 10:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 10:19 [PATCH net 0/2] net: sgi: ioc3-eth: two teardown fixes Imre Kaloz
2026-11-16 10:19 ` [PATCH net 1/2] net: sgi: ioc3-eth: set platform drvdata in probe Imre Kaloz
2026-11-16 10:19 ` Imre Kaloz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116101934.25910-3-kaloz@kernel.org \
--to=kaloz@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sashiko-bot@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox