Re: can't find interrupt number under /proc/interrupts for the pci multi-port on db1550

[rolf liu <rolfliu@gmail.com>]

What is the real reason to disable the existing uart on db1550? I
checked the PCI configuration for the multi-port board. It seems the
configuration is ok, including the memory map, irq number. The linux
can find such information and register this device, but it just can't
work :(

thanks
On 6/28/05, Jon Anders Haugum <jonah@omegav.ntnu.no> wrote:
> On Mon, 27 Jun 2005, rolf liu wrote:
> > I am running 2.4.31 on db1550 with a pci multi-port board. the kernel
> > starts up ok. but after start-up, I can't find the corresponding
> > interrupt number for this board, which is irq 2. I can find the device
> > under /proc/devices and /proc/tty/driver, etc. So I am now sure if it
> > is working ok. Is there good (simple) method to test this serial port?
> 
> My guess is that you can get it working if you disable the built-in serial
> ports in the kernel.
> 
> I've attached a quick'n'dirty patch I made for 2.4.27 that makes it
> possible to use both internal and pci serial ports. It's a hack, but it
> works.
> 
> 
> --
> Jon Anders Haugum
> 
> 
>