From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by neteng.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA80518 for ; Tue, 22 Sep 1998 14:06:59 -0700 (PDT) Return-Path: Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id OAA84419 for linux-list; Tue, 22 Sep 1998 14:05:59 -0700 (PDT) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA62345 for ; Tue, 22 Sep 1998 14:05:57 -0700 (PDT) mail_from (richardh@infopact.nl) Received: from bronx.bizarre.nl (9dyn84.breda.casema.net [195.96.116.84]) by sgi.sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id OAA09857 for ; Tue, 22 Sep 1998 14:05:53 -0700 (PDT) mail_from (richardh@infopact.nl) Received: from infopact.nl (root@localhost [127.0.0.1]) by bronx.bizarre.nl (8.9.0/8.9.0) with ESMTP id XAA00443 for ; Tue, 22 Sep 1998 23:11:19 +0200 Message-ID: <36081277.17A50BC9@infopact.nl> Date: Tue, 22 Sep 1998 23:11:19 +0200 From: Richard Hartensveld X-Mailer: Mozilla 4.05 [en] (X11; I; Linux 2.0.35 i686) MIME-Version: 1.0 To: linux@cthulhu.engr.sgi.com Subject: challenge s boots linux Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux@cthulhu.engr.sgi.com Precedence: bulk Hi, I have successfully booted linux on a challenge S. but the problem is that the kernel wants to write his output to the console, which isn't mij serial port unfortunatelly. Does anyone have a kernel for me from which i can continue my quest of installing linux on a challenge s ? :) Below you'll find my kernel booting information for whom is interested. Regards, Richard Hartensveld Command Monitor. Type "exit" to return to the menu. >> boot bootp():/vmlinux 72912+9440+3024+331696+23768d+3644+5808 entry: 0x8ff9a950 Setting $netaddr to 192.168.6.31 (from server perron-null) Obtaining /vmlinux from server perron-null PROMLIB: SGI ARCS firmware Version 1 Revision 10 PROMLIB: Total free ram 131379200 bytes (128300K,125MB) ARCH: SGI-IP22 CPU: MIPS-R5000 FPU ICACHE DCACHE SCACHE Loading R4000 MMU routines. CPU revision is: 00002310 Primary instruction cache 32kb, linesize 32 bytes) Primary data cache 32kb, linesize 32 bytes) Linux version 2.1.100 (root@alex3.med.iacnet.com) (gcc version 2.7.2) #29 Thu Ju l 9 22:19:39 EDT 1998 MC: SGI memory controller Revision 3 R4600/R5000 SCACHE size 512K, linesize 32 bytes. calculating r4koff... 000dbd5e(900446) zs0: console input zs0: console I/O Calibrating delay loop... 179.81 BogoMIPS Memory: 125208k/261732k available (1216k kernel code, 3456k data) Swansea University Computer Society NET3.039 for Linux 2.1 NET3: Unix domain sockets 0.16 for Linux NET3.038. Swansea University Computer Society TCP/IP for NET3.037 IP Protocols: ICMP, UDP, TCP Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX Starting kswapd v 1.5 Adv: about to run setup() initialize_kbd: Keyboard reset failed, no ACK SGI Zilog8530 serial driver version 1.00 Keyboard timeout Keyboard timeout tty00 at 0xbfbd9838 (irq = 21) is a Zilog8530 tty01 at 0xbfbd9830 (irq = 21) is a Zilog8530 Ramdisk driver initialized : 16 ramdisks of 4096K size loop: registered device at major 7 WD93: Driver version 1.25 compiled on Jul 7 1998 at 16:59:57 debug_flags=0x00 wd33c93-0: chip=WD33c93B/13 no_sync=0xff no_dma=0scsi0 : SGI WD93 scsi : 1 host. sending SDTR 0103013f0csync_xfer=2c Vendor: SGI Model: IBM DORS-32160 Rev: W80D Type: Direct-Access ANSI SCSI revision: 02 Rev: W80D Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 1, lun 0 sending SDTR 0103013f0csync_xfer=2c Vendor: IBM Model: DCAS-34330 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 6, lun 0 scsi : detected 2 SCSI disks total. SCSI device sda: hdwr sector= 512 bytes. Sectors= 4197405 [2049 MB] [2.0 GB] SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8467200 [4134 MB] [4.1 GB] sgiseeq.c: David S. Miller (dm@engr.sgi.com) eth0: SGI Seeq8003 08:00:69:0a:41:7b Sending BOOTP requests.... OK IP-Config: Got BOOTP answer from 192.168.6.1, my address is 192.168.6.31 Partition check: sda: sda1 sda2 sda3 sda4 sdb: sdb1 sdb2 sdb3 sdb4 Looking up port of RPC 100003/2 on 192.168.6.1 Looking up port of RPC 100005/1 on 192.168.6.1 VFS: Mounted root (nfs filesystem). Adv: done running setup() Freeing unused kernel memory: 44k freed Warning: unable to open an initial console.